Categories
r2013 notes

ME6501 Computer Aided Design Notes Regulation 2013 Anna University

ME6501 Computer Aided Design Notes

ME6501 Computer Aided Design Notes Regulation 2013 Anna University free download. Computer Aided Design ME6501 Notes pdf free download.

Product Cycle Model ME6501 Computer Aided Design Notes:

Step 1: Conceive Imagine, Specify, Plan, Innovate The first step is the definition of the product requirements based on company, market and customer.

From this requirement, the product’s technical data can be defined. In parallel, the early concept design work is performed defining the product with its main functional features.

Various media are utilized for these processes, from paper and pencil to clay mock-up to 3D Computer Aided Industrial Design.

(ME6501 Computer Aided Design Notes)

Step 2: Design Describe, Define, Develop, Test, Analyze and Validate
This is where the completed design and development of the product begins, succeeding to prototype testing, through pilot release to final product. It can also involve redesign and ramp for improvement to existing products as well as planned obsolescence.

The main tool used for design and development is CAD. This can be simple 2D drawing / drafting or 3D parametric feature based solid/surface modeling.

This step covers many engineering disciplines including: electronic, electrical, mechanical, and civil. Besides the actual making of geometry there is the analysis of the components and assemblies.

Optimization, Validation and Simulation activities are carried out using Computer Aided Engineering (CAE) software.

(ME6501 Computer Aided Design Notes)

These are used to perform various tasks such as: Computational Fluid Dynamics (CFD);Finite Element Analysis (FEA); and Mechanical Event Simulation (MES).

Computer Aided Quality (CAQ) is used for activities such as Dimensional tolerance analysis.

One more task carried out at this step is the sourcing of bought out components with the aid of procurement process.

(ME6501 Computer Aided Design Notes)

Subject Name Computer Aided Design
Subject code ME6501
Regulation 2013

ME6501 Computer Aided Design Notes Click here to download

ME6501 Computer Aided Design Syllabus


Computer Aided Design ME6501 Important questions


ME6501 Computer Aided Design Question Bank

Categories
r2013 notes

EE6351 ELECTRICAL DRIVES AND CONTROL Notes Regulation 2013 Anna university

EE6351 ELECTRICAL DRIVES AND CONTROL Notes  

EE6351 ELECTRICAL DRIVES AND CONTROL Notes  Regulation 2013 Anna university free download. EE6351 Notes ELECTRICAL DRIVES AND CONTROL free pdf download.

EE6351 ELECTRICAL DRIVES AND CONTROL Notes OUTCOMES: 

  • Upon Completion of this subject, the students can able to explain different types of electrical machines and their performance.

TEXT BOOKS EE6351 ELECTRICAL DRIVES AND CONTROL Notes:

  1.  Vedam Subrahmaniam, “Electric Drives (Concepts and Applications”, Tata McGraw-Hill, 2001.
  2. Nagrath .I.J. & Kothari .D.P, “Electrical Machines”, Tata McGraw-Hill, 1998.

REFERENCES EE6351 ELECTRICAL DRIVES AND CONTROL Notes:

  1. Pillai.S.K “A First Course on Electric Drives”, Wiley Eastern Limited, 1998.
  2. Singh. M.D., K.B.Khanchandani, “Power Electronics”, Tata McGraw-Hill, 1998.
  3. Partab. H., “Art and Science and Utilisation of Electrical Energy”, Dhanpat Rai and Sons, 1994.

Drives are employed for systems that require motion control – e.g. transportation
system, fans, robots, pumps, machine tools, etc.

Prime movers are required in drive systems to provide the sources: diesel engines, petrol engines, hydraulic motors, electric motors etc. movement or motion and energy that is used to provide the motion can come from various

Drives that use electric motors as the prime movers are known as electrical drives. There are several advantages of electrical drives: a. Flexible control characteristic – This is particularly true when power electronic Converters are employed where the dynamic and steady state characteristics of the motor can be controlled by controlling the applied voltage or current. b. Available in wide range of speed, torque and power c. High efficiency, lower noise, low maintenance requirements and cleaner operation d. Electric energy is easy to be transported.

Subject Name Electrical Drives and Control
Subject Code EE6351
Regulation 2013
File PDF

EE6351 ELECTRICAL DRIVES AND CONTROL Notes Click Here to download 

Electrical Drives and Control EE6351 Syllabus


EE6351 Electrical Drives and Control Important questions


EE6351 Electrical Drives and Control Question Bank


Categories
r2013 notes

ME6302 MANUFACTURING TECHNOLOGY 1 Notes Regulation 2013 Anna University

ME6302 MANUFACTURING TECHNOLOGY 1 Notes Regulation 2013 Anna University

 ME6302 MANUFACTURING TECHNOLOGY 1 Notes Regulation 2013 Anna University free download. MANUFACTURING TECHNOLOGY 1 Notes free pdf download.

ME6302 MANUFACTURING TECHNOLOGY 1 Notes OUTCOMES:

  •  Upon completion of this course, the students can able to apply the different manufacturing process and use this in industry for component production.

ME6302 MANUFACTURING TECHNOLOGY 1 Notes TEXT BOOKS:

  1. Hajra Chouldhary S.K and Hajra Choudhury. AK., “Elements of workshop Technology”, volume I and II, Media promoters and Publishers Private Limited, Mumbai, 1997.
  2. Kalpakjian. S, “Manufacturing Engineering and Technology”, Pearson Education India Edition, 2006.

ME6302 MANUFACTURING TECHNOLOGY 1 Notes REFERENCES:

  1. Gowri P. Hariharan, A.Suresh Babu, “Manufacturing Technology I”, Pearson Education, 2008.
  2. Roy. A. Lindberg, “Processes and Materials of Manufacture”, PHI / Pearson education, 2006.
  3. Paul Degarma E, Black J.T and Ronald A. Kosher, “Materials and Processes, in Manufacturing” Eight Edition, Prentice – Hall of India, 1997.
  4. Sharma, P.C., “A Text book of production Technology”, S.Chand and Co. Ltd., 2004.
  5. Rao, P.N. “Manufacturing Technology Foundry, Forming and Welding”, 2ndEdition, TMH-2003; 2003.

(ME6302 MANUFACTURING TECHNOLOGY 1 Notes)

Virtually nothing moves, turns, rolls, or flies without the benefit of cast metal products.

The metal casting industry plays a key role in all the major sectors of our economy.

There are castings in locomotives, cars trucks, aircraft, office buildings, factories, schools, and homes.

Metal Casting is one of the oldest materials shaping methods known. Casting means pouring molten metal into a mold with a cavity of the shape to be made, and allowing it to solidify. When solidified, the desired metal object is taken out from the mold either by breaking the mold or taking the mold apart. The solidified object is called the casting.

Subject Name MANUFACTURING TECHNOLOGY – I
Subject Code ME6302
Regulation 2013
File PDF

ME6302 MANUFACTURING TECHNOLOGY 1 Notes Click Here to download

ME6302 MANUFACTURING TECHNOLOGY 1 Syllabus


MANUFACTURING TECHNOLOGY 1 ME6302 Important questions


ME6302 MANUFACTURING TECHNOLOGY 1 Question Bank

Categories
r2013 notes

CE6451 FLUID MECHANICS AND MACHINERY Notes Regulation 2013 Anna University

CE6451 FLUID MECHANICS AND MACHINERY Notes 

CE6451 FLUID MECHANICS AND MACHINERY Notes Regulation 2013 Anna University free download. FLUID MECHANICS AND MACHINERY CE6451 Notes free pdf download.

OUTCOMES CE6451 FLUID MECHANICS AND MACHINERY Notes:

  • Upon completion of this course, the students can able to apply mathematical knowledge to predict the properties and characteristics of a fluid.
  • Can critically analyse the performance of pumps and turbines.

TEXT BOOK CE6451 FLUID MECHANICS AND MACHINERY Notes:

  1. Modi P.N. and Seth, S.M. “Hydraulics and Fluid Mechanics”, Standard Book House, New Delhi 2004.

REFERENCES CE6451 FLUID MECHANICS AND MACHINERY Notes:

  1. Streeter, V. L. and Wylie E. B., “Fluid Mechanics”, McGraw Hill Publishing Co. 2010.
  2. Kumar K. L., “Engineering Fluid Mechanics”, Eurasia Publishing House(p) Ltd., New Delhi 2004.
  3. Robert W.Fox, Alan T. McDonald, Philip J.Pritchard, “Fluid Mechanics and Machinery”, 2011.
  4. Graebel. W.P, “Engineering Fluid Mechanics”, Taylor & Francis, Indian Reprint, 2011.

What is fluid mechanics?

As its name suggests it is the branch of applied mechanics concerned with the statics and dynamics of fluids – both liquids and gases.

The analysis of the behavior of fluids is based on the fundamental laws of mechanics which relate continuity of mass and energy with force and momentum together with the familiar solid mechanics properties.

Define the nature of a fluid.

Show where fluid mechanics concepts are common with those of solid mechanics and indicate some fundamental areas of difference.

Introduce viscosity and show what are Newtonian and non-Newtonian fluids

Define the appropriate physical properties and show how these allow differentiation between solids and fluids as well as between liquids and gases.

Subject Name FLUID MECHANICS AND MACHINERY
Subject Code CE6451
Regulation 2013
File PDF

CE6451 FLUID MECHANICS AND MACHINERY Notes Click Here to download 

CE6451 FLUID MECHANICS AND MACHINERY Syllabus


FLUID MECHANICS AND MACHINERY CE6451 Important questions 


CE6451 FLUID MECHANICS AND MACHINERY Question Bank

Categories
r2013 notes

ME6301 Notes ENGINEERING THERMODYNAMICS Regulation 2013 Anna University

 ME6301 ENGINEERING THERMODYNAMICS NOTES

ME6301 ENGINEERING THERMODYNAMICS Notes Regulation 2013 Anna University free download. ENGINEERING THERMODYNAMICS ME6301 Notes pdf free download.

ME6301 ENGINEERING THERMODYNAMICS Notes OUTCOMES:

  • Upon completion of this course, the students can able to apply the Thermodynamic Principles to Mechanical Engineering Application.
  • Apply mathematical fundamentals to study the properties of steam, gas and gas mixtures.

ME6301 ENGINEERING THERMODYNAMICS Notes TEXT BOOKS:

  1.  Nag.P.K., “Engineering Thermodynamics”, 4thEdition, Tata McGraw-Hill, New Delhi, 2008.
  2. Natarajan E., “Engineering Thermodynamics: Fundamentals and Applications”, AnuragamPublications, 2012.
  3. What is Thermodynamics?

For a wide range of engineering plant like steam turbines, reciprocating engines, turbo-jets, rockets, combustion systems etc., we are concerned with the transfer of heat and work.

In many cases the objective is to convert one form of energy to another. Thermodynamics is science of energy and entropy. “Thermodynamics is the science that deals with heat and work and those properties of substances that bear a relation to heat and work.”

State, Property, Path, Process

The idea of system is defined in the introduction. A closed system is fully defined when the following details are known:
• The fluid, i.e. whether gas, water etc.
• The boundary between the fluid under consideration and its surroundings
• The mass of the fluid within the boundary.
Every system has certain characteristics by which its physical condition may be described, e.g. volume, temperature, pressure etc. Such characteristics are called properties of the system.

These are all macroscopic in nature. When all the properties of a system have definite values, the system is said to exist at a definite state.

Any operation in which one or more properties of a system change is called a change of state

ME6301 ENGINEERING THERMODYNAMICS Notes REFERENCES:

  1. Cengel. Y and M.Boles, “Thermodynamics – An Engineering Approach”, 7th Edition, TataMcGraw Hill, 2010.
  2. Holman.J.P., “Thermodynamics”, 3rd Edition, McGraw-Hill, 1995.
  3. Rathakrishnan. E., “Fundamentals of Engineering Thermodynamics”, 2nd Edition, Prentice-Hall of India Pvt. Ltd, 2006
  4. Chattopadhyay, P, “Engineering Thermodynamics”, Oxford University Press, 2010.
  5. Arora C.P, “Thermodynamics”, Tata McGraw-Hill, New Delhi, 2003.
  6. Van Wylen and Sonntag, “Classical Thermodynamics”, Wiley Eastern, 1987
  7. Venkatesh. A, “Basic Engineering Thermodynamics”, Universities Press (India) Limited, 2007.
  8. Kau-Fui Vincent Wong, “Thermodynamics for Engineers”, CRC Press, 2010 Indian Reprint.
  9. Prasanna Kumar: Thermodynamics “Engineering Thermodynamics” Pearson Education, 2013

 

Subject Name ENGINEERING THERMODYNAMICS
Subject Code ME6301
Regulation 2013
File PDF

ME6301 ENGINEERING THERMODYNAMICS Notes Click Here to download

ME6301 Engineering Thermodynamics Syllabus


Engineering Thermodynamics ME6301 Important questions


ME6301 Engineering Thermodynamics Question Bank

Categories
r2013 notes

CE6306 STRENGTH OF MATERIALS Notes Regulation 2013 Anna University

CE6306 STRENGTH OF MATERIALS NOTES 

CE6306 STRENGTH OF MATERIALS Notes Regulation 2013 Anna University free download. CE6306 Notes STRENGTH OF MATERIALS free pdf download.

OUTCOMES CE6306 STRENGTH OF MATERIALS Notes:

  •  Upon completion of this course, the students can able to apply mathematical knowledge to calculate the deformation behavior of simple structures.
  • Critically analyse problem and solve the problems related to mechanical elements and analyse the deformation behavior for different types of loads.

TEXT BOOKS CE6306 STRENGTH OF MATERIALS Notes:

  1.  Bansal, R.K., “Strength of Materials”, Laxmi Publications (P) Ltd., 2007
  2. Jindal U.C., “Strength of Materials”, Asian Books Pvt. Ltd., New Delhi, 2007

CE6306 STRENGTH OF MATERIALS Notes REFERENCES:

  1.  Egor. P.Popov “Engineering Mechanics of Solids” Prentice Hall of India, New Delhi, 2001
  2. Subramanian R., “Strength of Materials”, Oxford University Press, Oxford Higher Education Series, 2007.
  3. Hibbeler, R.C., “Mechanics of Materials”, Pearson Education, Low Price Edition, 2007
  4. Ferdinand P. Been, Russell Johnson, J.r. and John J. Dewole “Mechanics of Materials”, Tata McGraw Hill Publishing ‘co. Ltd., New Delhi, 2005.

Rigid body motion theory is a fundamental and well-established part of physics. It is based on the approximation that for stiff materials, any force applied to a body produces a negligible deformation.

Thus, the only change a force can produce is change in the center of mass motion and change in the rotational motion. This means that simulation of even
complex bodies is relatively simple, and thus this method has become popular in the computer simulation field.

Given the forces acting on the body, the motion can be determined using ?? ??for
translational motion, and a similar relation for rotational motion .

The rigid body motion model has traditionally been applied in range analysis in CAD and for computer animation where deformation is not required. If the deformation is not negligible, then the approximation does not hold, and we need to start over and come up with some other model.

There exists many different models, but the two models which have emerged to
become the most widely used in practice are: mass-spring models and statics models solved using the Finite Element Method (FEM).

Subject Name STRENGTH OF MATERIALS
Subject Code CE6306
Regulation 2013
File PDF

CE6306 Notes Click Here to download

STRENGTH OF MATERIALS CE6306 Syllabus


STRENGTH OF MATERIALS CE6306 Important questions


CE6306 STRENGTH OF MATERIALS Question Bank

Categories
r2013 notes

CE6704 ESTIMATION AND QUANTITY SURVEYING Notes Regulation 2013 Anna University

CE6704 ESTIMATION AND QUANTITY SURVEYING Notes

CE6704 ESTIMATION AND QUANTITY SURVEYING Notes Regulation 2013 Anna University free download. CE6704 Notes free pdf download.

CE6704 ESTIMATION AND QUANTITY SURVEYING Notes OUTCOMES:

The student shall be able to estimate the material quantities, prepare a bill of quantities, make specifications and prepare tender documents. Student shall be able to prepare value estimates. 

CE6704 ESTIMATION AND QUANTITY SURVEYING Notes TEXTBOOKS:

  1.  Dutta, B.N., “Estimating and Costing in Civil Engineering”, UBS Publishers & Distributors Pvt. Ltd., 2003.
  2. Kohli, D.D and Kohli, R.C., “A Text Book of Estimating and Costing (Civil)”, S.Chand & Company Ltd., 2004.

CE6704 ESTIMATION AND QUANTITY SURVEYING Notes REFERENCES:

  1.  PWD Data Book. 
  2. Tamilnadu Transparencies in Tender Act, 1998
  3. Arbitration and Conciliation Act, 1996
  4. Standard Bid Evaluation Form, Procurement of Goods or Works, The World Bank, April 1996.

1. ESTIMATE (CE6704 ESTIMATION AND QUANTITY SURVEYING Notes)

An estimate is the anticipated or probable cost of work and is usually prepared before the construction is taken up. It is indeed calculations or computations of various items of an engineering work.

2. QUANTITY SURVEY (CE6704 ESTIMATION AND QUANTITY SURVEYING Notes)

It is the schedule of all items of work in a building. These quantities are calculated from the drawing of the building. Thus quantity survey gives quantities of work done in case of each items, when priced gives the total cost. In short, quantity survey means calculations of quantities of materials required to complete the work concerned

3. SPECIFICATIONS (CE6704 ESTIMATION AND QUANTITY SURVEYING Notes)

Detailed specifications gives the nature, quality and class of work, materials to be used in the various parts of work , quality of the material, their proportions, method of preparation, workmanship and description of execution of work are required.

4. RATES (CE6704 ESTIMATION AND QUANTITY SURVEYING Notes)

The rates of various items of works, materials to be used in the construction and the wages of different categories of labor (skilled and unskilled) should be available for preparing an estimate. The cost of transportation charges should also be known. As far as possible sanctioned “Schedule of Rates” shall be followed or the rates may be worked out by the “Analysis of Rates” method.

Subject Name ESTIMATION AND QUANTITY SURVEYING
Subject Code CE6704
Regulation 2013
File PDF

CE6704 Notes Click Here to download

CE6704 Syllabus


ESTIMATION AND QUANTITY SURVEYING Important questions


CE6704 ESTIMATION AND QUANTITY SURVEYING Question Bank

Categories
r2013 notes

GE6252 notes BASIC ELECTRICAL AND ELECTRONICS ENGINEERING BEEE

GE6252 notes BASIC ELECTRICAL AND ELECTRONICS ENGINEERING BEEE

GE6252 notes BEEE notes Regulation 2013 Anna University free download. BASIC ELECTRICAL AND ELECTRONICS ENGINEERING BEEE notes pdf free download.

GE6252 notes BASIC ELECTRICAL AND ELECTRONICS ENGINEERING BEEE notes:

A DC circuit (Direct Current circuit) is an electrical circuit that consists of any combination of constant voltage sources, constant current sources, and resistors.

In this case, the circuit voltages and currents are constant, i.e., independent of time. More technically, a DC circuit has no memory.

That is, a particular circuit voltage or current does not depend on the past value of any circuit voltage or current.

This implies that the system of equations that represent a DC circuit do not involve integrals or derivatives.

If a capacitor and/or inductor is added to a DC circuit, the resulting circuit is not, strictly speaking, a DC circuit. However, most such circuits have a DC solution.

(GE6252 notes BEEE notes BASIC ELECTRICAL AND ELECTRONICS ENGINEERING notes)

This solution gives the circuit voltages and currents when the circuit is in DC steady state.

More technically, such a circuit is represented by a system of differential equations. The solution to these equations usually contain a time varying or transient part as well as constant or steady state part. It is this steady state part that is the DC solution.

There are some circuits that do not have a DC solution.

Two simple examples are a constant current source connected to a capacitor and a constant voltage source connected to an inductor.

In electronics, it is common to refer to a circuit that is powered by a DC voltage source such as a battery or the output of a DC power supply as a DC circuit even though what is meant is that the circuit is DC powered.

Semester 2
Subject BASIC ELECTRICAL AND ELECTRONICS ENGINEERING
Subject Code GE6252 – BEEE
Regulation 2013

GE6252 notes Click Here to download

GE6252 Syllabus


BASIC ELECTRICAL AND ELECTRONICS ENGINEERING GE6252 Important questions


BEEE GE6252 Question Bank

Categories
r2013 notes

HS6251 Technical English 2 Notes

HS6251 Notes TECHNICAL ENGLISH 2 Anna University 2013 regulation

HS6251 TECHNICAL ENGLISH 2 Notes Anna University 2013 regulation free download. TECHNICAL ENGLISH 2 HS6251 Notes pdf free download.

UNIT I HS6251 TECHNICAL ENGLISH 2 Notes 

Listening – Listening to informal conversations and participating; Speaking – Opening a conversation (greetings, comments on topics like weather) – Turn taking – Closing a conversation (excuses, general wish, positive comment, thanks); Reading – Developing analytical skills, Deductive and inductive reasoning – Extensive reading; Writing – Effective use of SMS for sending short notes and messages – Using ‘emoticons’ as symbols in email messages; Grammar – Regular and irregular verbs – Active and passive voice; Vocabulary – Homonyms (e.g. ‘can’) – Homophones (e.g. ‘some’, ‘sum’); E-materials – Interactive exercise on Grammar and vocabulary – blogging; Language Lab – Listening to different types of conversation and answering questions.

UNIT II HS6251 TECHNICAL ENGLISH 2 Notes 

Listening – Listening to situation based dialogues; Speaking – Conversation practice in real life situations, asking for directions (using polite expressions), giving directions (using imperative sentences), Purchasing goods from a shop, Discussing various aspects of a film (they have already
seen) or a book (they have already read); Reading – Reading a short story or an article from newspaper, Critical reading, Comprehension skills; Writing – Writing a review / summary of a story / article, Personal letter (Inviting your friend to a function, congratulating someone for his / her success, thanking one’s friends / relatives); Grammar – modal verbs, Purpose expressions; Vocabulary – Phrasal verbs and their meanings, Using phrasal verbs in sentences; E-materials – Interactive exercises on Grammar and vocabulary, Extensive reading activity (reading stories / novels), Posting reviews in blogs – Language Lab – Dialogues (Fill up exercises), Recording students’ dialogues.

UNIT III HS6251 TECHNICAL ENGLISH 2 Notes

Listening – Listening to the conversation – Understanding the structure of conversations; Speaking – Conversation skills with a sense of stress, intonation, pronunciation and meaning – Seeking information – expressing feelings (affection, anger, regret, etc.); Reading – Speed reading – reading
passages with time limit – Skimming; Writing – Minutes of meeting – format and practice in the preparation of minutes – Writing summary after reading articles from journals – Format for journal articles – elements of technical articles (abstract, introduction, methodology, results, discussion,
conclusion, appendices, references) – Writing strategies; Grammar – Conditional clauses – Cause and effect expressions; Vocabulary – Words used as nouns and verbs without any change in the spelling (e.g. ‘rock’, ‘train’, ‘ring’); E-materials – Interactive exercise on Grammar and vocabulary – Speed Reading practice exercises; Language Lab – Intonation practice using EFLU and RIE materials – Attending a meeting and writing minutes.

UNIT IV HS6251 TECHNICAL ENGLISH 2 Notes

Listening – Listening to a telephone conversation, Viewing model interviews (face-to-face, telephonic and video conferencing); Speaking – Role play practice in telephone skills – listening and responding, -asking questions, -note taking – passing on messages, Role play and mock interview for grasping interview skills; Reading – Reading the job advertisements and the profile of the company concerned – scanning; Writing – Applying for a job – cover letter – résumé preparation – vision, mission and goals of the candidate; Grammar – Numerical expressions – Connectives (discourse markers); Vocabulary – Idioms and their meanings – using idioms in sentences; E-materials – Interactive exercises on
Grammar and Vocabulary – Different forms of résumés- Filling up a résumé / cover letter; Language Lab – Telephonic interview – recording the responses – e-résumé writing.

UNIT V HS6251 TECHNICAL ENGLISH 2 Notes

Listening – Viewing a model group discussion and reviewing the performance of each participant – Identifying the characteristics of a good listener; Speaking – Group discussion skills – initiating the discussion – exchanging suggestions and proposals – expressing dissent/agreement – assertiveness in expressing opinions – mind mapping technique; Reading – Note making skills – making notes from books, or any form of written materials – Intensive reading; Writing – Checklist – Types of reports –
Feasibility / Project report – report format – recommendations / suggestions – interpretation of data (using charts for effective presentation); Grammar – Use of clauses; Vocabulary – Collocation; Ematerials – Interactive grammar and vocabulary exercises – Sample GD – Pictures for discussion, Interactive grammar and vocabulary exercises; Language Lab – Different models of group discussion.

Semester 2
Regulation 2013
Subject name TECHNICAL ENGLISH 2
Subject Code HS6251
File type PDF

HS6251 TECHNICAL ENGLISH 2 Notes Click here to download

HS6251 Syllabus


TECHNICAL ENGLISH 2 Important questions


HS6251 TECHNICAL ENGLISH 2 Question Bank


Categories
r2013 notes

CE6703 WATER RESOURCES AND IRRIGATION ENGINEERING Notes Regulation 2013 Anna University

 WATER RESOURCES AND IRRIGATION ENGINEERING Notes CE6703

CE6703 WATER RESOURCES AND IRRIGATION ENGINEERING Notes free pdf download Regulation 2013 Anna University. CE6703 Notes free download.

CE6703 WATER RESOURCES AND IRRIGATION ENGINEERING Notes TEXTBOOKS:

  1.  Linsley R.K. and Franzini J.B, “Water Resources Engineering”, McGraw-Hill Inc, 2000.
  2. Punmia B.C., et. al; Irrigation and water power Engineering, Laxmi Publications, 16th Edition, New Delhi, 2009
  3. Garg S. K., “Irrigation Engineering and Hydraulic structures”, Khanna Publishers, 23rd Revised Edition, New Delhi, 2009

CE6703 WATER RESOURCES AND IRRIGATION ENGINEERING Notes REFERENCES:

  1. Duggal, K.N. and Soni, J.P., “Elements of Water Resources Engineering”, New Age International Publishers, 2005
  2. Chaturvedi M.C., “Water Resources Systems Planning and Management”, Tata McGraw- Hill Inc., New Delhi, 1997.
  3. Michael A.M., Irrigation Theory and Practice, 2nd Edition, Vikas Publishing House Pvt. Ltd., Noida, Up, 2008
  4. Dilip Kumar Majumdar, “Irrigation Water Management”, Prentice-Hall of India, New Delhi, 2008.
  5. Asawa, G.L., “Irrigation Engineering”, NewAge International Publishers, New Delhi, 2000.

CE6703 WATER RESOURCES AND IRRIGATION ENGINEERING Notes Engineering economy in water resources planning:

All Water Resources projects have to be cost evaluated.
This is an essential part of planning.

Since, generally, such projects would be funded by the respective State Governments, in which the project would be coming up it would be helpful for the State planners to collect the desired amount of money, like by issuing bonds to the public, taking loans from a bank, etc.

Since a project involves money, it is essential that the minimum amount is spent, under the given constraints of project construction.

Hence, a few feasible alternatives for a project are usually worked out. For example, a project involving a storage dam has to be located on a map of the river valley at more than one possible location, if the terrain permits.

In this instance, the dam would generally be located at the narrowest part of the river valley to reduce cost of dam construction, but also a couple of more alternatives would be selected since there would be other features of a dam whose cost would dictate the total cost of the project.

Subject Name WATER RESOURCES AND IRRIGATION ENGINEERING
Subject Code CE6703
Regulation 2013
File PDF

CE6703 Notes Click Here to download

CE6703 Syllabus


WATER RESOURCES AND IRRIGATION ENGINEERING important questions


CE6703 WATER RESOURCES AND IRRIGATION ENGINEERING Question Bank