GE6757 TOTAL QUALITY MANAGEMENT Syllabus

GE6757 TOTAL QUALITY MANAGEMENT Syllabus Regulation 2013 Anna University free download. GE6757 Syllabus TOTAL QUALITY MANAGEMENT free pdf download

OBJECTIVES GE6757 TOTAL QUALITY MANAGEMENT Syllabus:

To facilitate the understanding of Quality Management principles and process.

UNIT I INTRODUCTION GE6757 TQM Syllabus

Introduction – Need for quality – Evolution of quality – Definitions of quality – Dimensions of product and service quality – Basic concepts of TQM – TQM Framework – Contributions of Deming, Juran and Crosby – Barriers to TQM – Quality statements – Customer focus – Customer orientation, Customer satisfaction, Customer complaints, Customer retention – Costs of quality.

UNIT II TQM PRINCIPLES GE6757 TOTAL QUALITY MANAGEMENT Syllabus

Leadership – Strategic quality planning, Quality Councils – Employee involvement – Motivation, Empowerment, Team and Teamwork, Quality circles Recognition and Reward, Performance appraisal – Continuous process improvement – PDCA cycle, 5S, Kaizen – Supplier partnership – Partnering, Supplier selection, Supplier Rating.

UNIT III TQM TOOLS AND TECHNIQUES I GE6757 TQM Syllabus

The seven traditional tools of quality – New management tools – Six sigma: Concepts, Methodology, applications to manufacturing, service sector including IT – Bench marking – Reason to bench mark, Bench marking process – FMEA – Stages, Types.

UNIT IV TQM TOOLS AND TECHNIQUES II GE6757 TOTAL QUALITY MANAGEMENT Syllabus

Control Charts – Process Capability – Concepts of Six Sigma – Quality Function Development (QFD) – Taguchi quality loss function – TPM – Concepts, improvement needs – Performance measures.

UNIT V QUALITY SYSTEMS GE6757 TOTAL QUALITY MANAGEMENT Syllabus

Need for ISO 9000 – ISO 9001-2008 Quality System – Elements, Documentation, Quality Auditing – QS 9000 – ISO 14000 – Concepts, Requirements and Benefits – TQM Implementation in manufacturing and service sectors..

Subject Name	TOTAL QUALITY MANAGEMENT
Subject Code	GE6757
Regulation	2013
File	PDF

GE6757 TOTAL QUALITY MANAGEMENT Syllabus click here to download

GE6757 TOTAL QUALITY MANAGEMENT Notes

---

GE6757 TOTAL QUALITY MANAGEMENT Important Questions

---

GE6757 TOTAL QUALITY MANAGEMENT Question Bank

ME6703 COMPUTER INTEGRATED MANUFACTURING SYSTEMS Syllabus

ME6703 COMPUTER INTEGRATED MANUFACTURING SYSTEMS Syllabus Regulation 2013 Anna University free download. ME6703 Syllabus COMPUTER INTEGRATED MANUFACTURING SYSTEMS free pdf download.

OBJECTIVES ME6703 COMPUTER INTEGRATED MANUFACTURING SYSTEMS Syllabus:

To understand the application of computers in various aspects of Manufacturing viz., Design, Proper planning, Manufacturing cost, Layout & Material Handling system.

UNIT I INTRODUCTION ME6703 COMPUTER INTEGRATED MANUFACTURING SYSTEMS Syllabus:

Brief introduction to CAD and CAM – Manufacturing Planning, Manufacturing control- Introduction to CAD/CAM – Concurrent Engineering-CIM concepts – Computerised elements of CIM system –Types of production – Manufacturing models and Metrics – Mathematical models of Production Performance – Simple problems – Manufacturing Control – Simple Problems – Basic Elements of an Automated system – Levels of Automation – Lean Production and Just-In-Time Production.

UNIT II PRODUCTION PLANNING AND CONTROL AND COMPUTERISED PROCESS PLANNING ME6703 COMPUTER INTEGRATED MANUFACTURING SYSTEMS Syllabus

Process planning – Computer Aided Process Planning (CAPP) – Logical steps in Computer Aided Process Planning – Aggregate Production Planning and the Master Production Schedule – Material Requirement planning – Capacity Planning- Control Systems-Shop Floor Control-Inventory Control – Brief on Manufacturing Resource Planning-II (MRP-II) & Enterprise Resource Planning (ERP) – Simple Problems.

UNIT III CELLULAR MANUFACTURING ME6703 COMPUTER INTEGRATED MANUFACTURING SYSTEMS Syllabus

Group Technology(GT), Part Families – Parts Classification and coding – Simple Problems in Opitz Part Coding system – Production flow Analysis – Cellular Manufacturing – Composite part concept – Machine cell design and layout – Quantitative analysis in Cellular Manufacturing – Rank Order Clustering Method – Arranging Machines in a GT cell – Hollier Method – Simple Problems.

UNIT IV FLEXIBLE MANUFACTURING SYSTEM (FMS) AND AUTOMATED GUIDED VEHICLE SYSTEM (AGVS) ME6703 COMPUTER INTEGRATED MANUFACTURING SYSTEMS Syllabus

Types of Flexibility – FMS – FMS Components – FMS Application & Benefits – FMS Planning and Control– Quantitative analysis in FMS – Simple Problems. Automated Guided Vehicle System (AGVS) – AGVS Application – Vehicle Guidance technology – Vehicle Management & Safety.

UNIT V INDUSTRIAL ROBOTICS ME6703 COMPUTER INTEGRATED MANUFACTURING SYSTEMS Syllabus

Robot Anatomy and Related Attributes – Classification of Robots- Robot Control systems – End Effectors – Sensors in Robotics – Robot Accuracy and Repeatability – Industrial Robot Applications – Robot Part Programming – Robot Accuracy and Repeatability – Simple Problems.

Subject Name	COMPUTER INTEGRATED MANUFACTURING SYSTEMS
Subject Code	ME6703
Regulation	2013
File	PDF

ME6703 COMPUTER INTEGRATED MANUFACTURING SYSTEMS Syllabus click here to download

ME6703 COMPUTER INTEGRATED MANUFACTURING SYSTEMS Notes

---

ME6703 COMPUTER INTEGRATED MANUFACTURING SYSTEMS Important questions

---

ME6703 COMPUTER INTEGRATED MANUFACTURING SYSTEMS Question Bank

ME6702 Mechatronics Syllabus

ME6702 Mechatronics Syllabus Regulation 2013 Anna University free download. ME6702 Syllabus Mechatronics free pdf download.

OBJECTIVES ME6702 Mechatronics Syllabus:

To impart knowledge about the elements and techniques involved in Mechatronics systems which are very much essential to understand the emerging field of automation.

UNIT I INTRODUCTION ME6702 Mechatronics Syllabus

Introduction to Mechatronics – Systems – Concepts of Mechatronics approach – Need for Mechatronics – Emerging areas of Mechatronics – Classification of Mechatronics. Sensors and Transducers: Static and dynamic Characteristics of Sensor, Potentiometers – LVDT – Capacitance sensors – Strain gauges – Eddy current sensor – Hall effect sensor – Temperature sensors – Light sensors

UNIT II 8085 MICROPROCESSOR AND 8051 MICROCONTROLLER ME6702 Syllabus Mechatronics

Introduction – Architecture of 8085 – Pin Configuration – Addressing Modes –Instruction set, Timing diagram of 8085 – Concepts of 8051 microcontroller – Block diagram,.

UNIT III PROGRAMMABLE PERIPHERAL INTERFACE ME6702 Mechatronics Syllabus

Introduction – Architecture of 8255, Keyboard interfacing, LED display –interfacing, ADC and DAC interface, Temperature Control – Stepper Motor Control – Traffic Control interface.

UNIT IV PROGRAMMABLE LOGIC CONTROLLER ME6702 Syllabus Mechatronics

Introduction – Basic structure – Input and output processing – Programming – Mnemonics – Timers, counters and internal relays – Data handling – Selection of PLC.

UNIT V ACTUATORS AND MECHATRONIC SYSTEM DESIGN ME6702 Mechatronics Syllabus

Types of Stepper and Servo motors – Construction – Working Principle – Advantages and Disadvantages. Design process-stages of design process – Traditional and Mechatronics design concepts – Case studies of Mechatronics systems – Pick and place Robot – Engine Management system – Automatic car park barrier.

Subject Name	Mechatronics
Subject Code	ME6702
Regulation	2013
File	PDF

ME6702 Syllabus Mechatronics click here to download

ME6702 Mechatronics Notes

---

ME6702 Mechatronics Important questions

---

ME6702 Mechatronics Question Bank

ME6701 POWER PLANT ENGINEERING Syllabus

ME6701 POWER PLANT ENGINEERING Syllabus Regulation 2013 Anna University free download. ME6701 Syllabus POWER PLANT ENGINEERING free pdf download.

OBJECTIVES ME6701 POWER PLANT ENGINEERING Syllabus:

Providing an overview of Power Plants and detailing the role of Mechanical Engineers in their operation and maintenance.

UNIT I COAL BASED THERMAL POWER PLANTS ME6701 POWER PLANT ENGINEERING Syllabus

Rankine cycle – improvisations, Layout of modern coal power plant, Super Critical Boilers, FBC Boilers, Turbines, Condensers, Steam & Heat rate, Subsystems of thermal power plants – Fuel and ash handling, Draught system, Feed water treatment. Binary Cycles and Cogeneration systems.

UNIT II DIESEL, GAS TURBINE AND COMBINED CYCLE POWER PLANTS ME6701 POWER PLANT ENGINEERING Syllabus

Otto, Diesel, Dual & Brayton Cycle – Analysis & Optimisation. Components of Diesel and Gas Turbine power plants. Combined Cycle Power Plants. Integrated Gasifier based Combined Cycle systems.

UNIT III NUCLEAR POWER PLANTS ME6701 Syllabus POWER PLANT ENGINEERING

Basics of Nuclear Engineering, Layout and subsystems of Nuclear Power Plants, Working of Nuclear Reactors : Boiling Water Reactor (BWR), Pressurized Water Reactor (PWR), CANada Deuterium- Uranium reactor (CANDU), Breeder, Gas Cooled and Liquid Metal Cooled Reactors. Safety measures for Nuclear Power plants.

UNIT IV POWER FROM RENEWABLE ENERGY ME6701 POWER PLANT ENGINEERING Syllabus

Hydro Electric Power Plants – Classification, Typical Layout and associated components including Turbines. Principle, Construction and working of Wind, Tidal, Solar Photo Voltaic (SPV), Solar Thermal, Geo Thermal, Biogas and Fuel Cell power systems.

UNIT V ENERGY, ECONOMIC AND ENVIRONMENTAL ISSUES OF POWER PLANTS ME6701 Syllabus POWER PLANT ENGINEERING

Power tariff types, Load distribution parameters, load curve, Comparison of site selection criteria, relative merits & demerits, Capital & Operating Cost of different power plants. Pollution control technologies including Waste Disposal Options for Coal and Nuclear Power Plants.

Subject Name	POWER PLANT ENGINEERING
Subject Code	ME6701
Regulation	2013
File	PDF

ME6701 POWER PLANT ENGINEERING Syllabus click here to download

ME6701 POWER PLANT ENGINEERING Notes

---

ME6701 POWER PLANT ENGINEERING Important questions

---

ME6701 POWER PLANT ENGINEERING Question Bank

GE6075 Professional Ethics in Engineering Syllabus

GE6075 Professional Ethics in Engineering Syllabus Regulation 2013 Anna University free download. GE6075 Syllabus Professional Ethics in Engineering free pdf download.

OBJECTIVES GE6075 Professional Ethics in Engineering Syllabus:

To enable the students to create an awareness on Engineering Ethics and Human Values, to instill Moral and Social Values and Loyalty and to appreciate the rights of others.

UNIT I HUMAN VALUES GE6075 Professional Ethics in Engineering Syllabus

Morals, values and Ethics – Integrity – Work ethic – Service learning – Civic virtue – Respect for others – Living peacefully – Caring – Sharing – Honesty – Courage – Valuing time – Cooperation – Commitment – Empathy – Self confidence – Character – Spirituality – Introduction to Yoga and meditation for professional excellence and stress management.

UNIT II ENGINEERING ETHICS GE6075 Professional Ethics in Engineering Syllabus

Senses of ‘Engineering Ethics’ – Variety of moral issues – Types of inquiry – Moral dilemmas – Moral Autonomy – Kohlberg’s theory – Gilligan’s theory – Consensus and Controversy – Models of professional roles – Theories about right action – Self-interest – Customs and Religion – Uses of Ethical Theories

UNIT III ENGINEERING AS SOCIAL EXPERIMENTATION GE6075 Professional Ethics in Engineering Syllabus

Engineering as Experimentation – Engineers as responsible Experimenters – Codes of Ethics – A Balanced Outlook on Law.

UNIT IV SAFETY, RESPONSIBILITIES AND RIGHTS GE6075 Syllabus Professional Ethics in Engineering 

Safety and Risk – Assessment of Safety and Risk – Risk Benefit Analysis and Reducing Risk – Respect for Authority – Collective Bargaining – Confidentiality – Conflicts of Interest – Occupational Crime – Professional Rights – Employee Rights – Intellectual Property Rights (IPR) – Discrimination

UNIT V GLOBAL ISSUES GE6075 Syllabus Professional Ethics in Engineering

Multinational Corporations – Environmental Ethics – Computer Ethics – Weapons Development – Engineers as Managers – Consulting Engineers – Engineers as Expert Witnesses and Advisors – Moral Leadership –Code of Conduct – Corporate Social Responsibility

Subject Name	Professional Ethics in Engineering
Subject code	GE6075
Regulation	2013

GE6075 Professional Ethics in Engineering Syllabus Click here to download

GE6075 Professional Ethics in Engineering Notes

---

GE6075 Professional Ethics in Engineering Important questions

---

GE6075 Professional Ethics in Engineering Question Bank

---

 

ME6505 Dynamics of Machines Syllabus

ME6505 DYNAMICS OF MACHINES Syllabus Regulation 2013 Anna University free download. ME6505 Syllabus DYNAMICS OF MACHINES free pdf download.

 OBJECTIVES ME6505 DYNAMICS OF MACHINES Syllabus:

To understand the force-motion relationship in components subjected to external forces and analysis of standard mechanisms.

To understand the undesirable effects of unbalances resulting from prescribed motions in mechanism.

To understand the effect of Dynamics of undesirable vibrations.

To understand the principles in mechanisms used for speed control and stability control.

UNIT I FORCE ANALYSIS ME6505 DYNAMICS OF MACHINES Syllabus

Dynamic force analysis – Inertia force and Inertia torque– D Alembert’s principle –Dynamic Analysis inreciprocating engines – Gas forces – Inertia effect of connecting rod– Bearing loads – Crank shaft torque – Turning moment diagrams –Fly Wheels – Flywheels of punching presses- Dynamics of Camfollower mechanism.

UNIT II BALANCING ME6505 DYNAMICS OF MACHINES Syllabus

Static and dynamic balancing – Balancing of rotating masses – Balancing a single cylinder engine – Balancing of Multi-cylinder inline, V-engines – Partial balancing in engines – Balancing of linkages – Balancing machines-Field balancing of discs and rotors.

UNIT III SINGLE DEGREE FREE VIBRATION ME6505 DYNAMICS OF MACHINES Syllabus

Basic features of vibratory systems – Degrees of freedom – single degree of freedom – Free vibration – Equations of motion – Natural frequency – Types of Damping – Damped vibration– Torsional vibration of shaft – Critical speeds of shafts – Torsional vibration – Two and three rotor torsional systems.

UNIT IV FORCED VIBRATION ME6505 DYNAMICS OF MACHINES Syllabus

Response of one degree freedom systems to periodic forcing – Harmonic disturbances –Disturbance caused by unbalance – Support motion –transmissibility – Vibration isolation vibration measurement.

UNIT V MECHANISM FOR CONTROL ME6505 Syllabus DYNAMICS OF MACHINES 

Governors – Types – Centrifugal governors – Gravity controlled and spring controlled centrifugal governors – Characteristics – Effect of friction – Controlling force curves. Gyroscopes –Gyroscopic forces and torques – Gyroscopic stabilization – Gyroscopic effects in Automobiles, ships and airplanes.

Subject Name	DYNAMICS OF MACHINES
Subject code	ME6505
Regulation	2013

ME6505 Dynamics of Machines Syllabus Click here to download

ME6505 Dynamics of Machines Notes

---

ME6505 Dynamics of Machines Important questions

---

ME6505 Dynamics of Machines Question Bank

ME6504 METROLOGY AND MEASUREMENTS Syllabus

ME6504 METROLOGY AND MEASUREMENTS Syllabus Regulation 2013 Anna University free download. ME6504 Syllabus METROLOGY AND MEASUREMENTS free pdf download.

OBJECTIVES ME6504 METROLOGY AND MEASUREMENTS Syllabus:

To provide knowledge on various Metrological equipments available to measure the dimension of the components.

To provide knowledge on the correct procedure to be adopted to measure the dimension of the components.

UNIT I BASICS OF METROLOGY ME6504 METROLOGY AND MEASUREMENTS Syllabus

Introduction to Metrology – Need – Elements – Work piece, Instruments – Persons – Environment – their effect on Precision and Accuracy – Errors – Errors in Measurements – Types – Control – Types of standards.

UNIT II LINEAR AND ANGULAR MEASUREMENTS ME6504 METROLOGY AND MEASUREMENTS Syllabus

Linear Measuring Instruments – Evolution – Types – Classification – Limit gauges – gauge design – terminology – procedure – concepts of interchange ability and selective assembly – Angular measuring instruments – Types – Bevel protractor clinometers angle gauges, spirit levels sine bar – Angle alignment telescope – Autocollimator – Applications.

UNIT III ADVANCES IN METROLOGY ME6504 METROLOGY AND MEASUREMENTS Syllabus

Basic concept of lasers Advantages of lasers – laser Interferometers – types – DC and AC Lasers interferometer – Applications – Straightness – Alignment. Basic concept of CMM – Types of CMM – Constructional features – Probes – Accessories – Software – Applications – Basic concepts of Machine Vision System – Element – Applications.

UNIT IV FORM MEASUREMENT ME6504 METROLOGY AND MEASUREMENTS Syllabus

Principles and Methods of straightness – Flatness measurement – Thread measurement, gear measurement, surface finish measurement, Roundness measurement – Applications.

UNIT V MEASUREMENT OF POWER, FLOW AND TEMPERATURE ME6504 METROLOGY AND MEASUREMENTS Syllabus

Force, torque, power – mechanical , Pneumatic, Hydraulic and Electrical type. Flow measurement: Venturimeter, Orifice meter, rotameter, pitot tube – Temperature: bimetallic strip, thermocouples, electrical resistance thermometer – Reliability and Calibration – Readability and Reliability.

TOTAL : 45 PERIODS

OUTCOMES ME6504 Syllabus METROLOGY AND MEASUREMENTS:

Upon completion of this course, the Students can demonstrate different measurement technologies and use of them in Industrial Components

TEXT BOOKS ME6504 Syllabus METROLOGY AND MEASUREMENTS:

1. Jain R.K. “Engineering Metrology”, Khanna Publishers, 2005.
2. Gupta. I.C., “Engineering Metrology”, Dhanpatrai Publications, 2005.

REFERENCES ME6504 Syllabus METROLOGY AND MEASUREMENTS:

1. Charles Reginald Shotbolt, “Metrology for Engineers”, 5th edition, Cengage Learning EMEA,1990.
2. Backwith, Marangoni, Lienhard, “Mechanical Measurements”, Pearson Education , 2006.

Subject Name	Metrology and Measurements
Subject code	ME6504
Regulation	2013

ME6504 Metrology and Measurements Syllabus Click here to download

ME6504 Metrology and Measurements Notes

---

ME6504 Metrology and Measurements Important questions

---

ME6504 Metrology and Measurements Question Bank

---

 

ME6503 Design of Machine Elements Syllabus

ME6503 Design of Machine Elements Syllabus Regulation 2013 Anna University free download. Design of Machine Elements ME6502 Syllabus pdf free download.

OBJECTIVES ME6503 Design of Machine Elements Syllabus

• To familiarize the various steps involved in the Design Process
• To understand the principles involved in evaluating the shape and dimensions of a component to satisfy functional and strength requirements.
• To learn to use standard practices and standard data
• To learn to use catalogues and standard machine components
(Use of P S G Design Data Book is permitted)

UNIT I STEADY STRESSES AND VARIABLE STRESSES IN MACHINE MEMBERS ME6503 Design of Machine Elements Syllabus

Introduction to the design process – factors influencing machine design, selection of materials based on mechanical properties – Preferred numbers, fits and tolerances – Direct, Bending and torsional stress equations – Impact and shock loading – calculation of principle stresses for various load combinations, eccentric loading – curved beams – crane hook and ‘C’ frame- Factor of safety – theories of failure – Design based on strength and stiffness – stress concentration – Design for variable loading.

UNIT II SHAFTS AND COUPLINGS ME6503 Design of Machine Elements Syllabus

Design of solid and hollow shafts based on strength, rigidity and critical speed – Keys, keyways and splines – Rigid and flexible couplings.

UNIT III TEMPORARY AND PERMANENT JOINTS ME6503 Design of Machine Elements Syllabus

Threaded fastners – Bolted joints including eccentric loading, Knuckle joints, Cotter joints – Welded joints, riveted joints for structures – theory of bonded joints.

UNIT IV ENERGY STORING ELEMENTS AND ENGINE COMPONENTS ME6503 Design of Machine Elements Syllabus

Various types of springs, optimization of helical springs – rubber springs – Flywheels considering stresses in rims and arms for engines and punching machines- Connecting Rods and crank shafts.

UNIT V BEARINGS ME6503 Design of Machine Elements Syllabus

Sliding contact and rolling contact bearings – Hydrodynamic journal bearings, Sommerfeld Number, Raimondi and Boyd graphs, — Selection of Rolling Contact bearings.

Subject Name	Design of Machine Elements
Subject code	ME6503
Regulation	2013

ME6502 Design of Machine Elements Syllabus Click here to download

ME6502 Design of Machine Elements Notes

---

ME6502 Design of Machine Elements Important questions

---

ME6502 Design of Machine Elements Question Bank

ME6502 Heat and Mass Transfer Syllabus

ME6502 Heat and Mass Transfer Syllabus Regulation 2013 Anna University free download. Heat and Mass Transfer ME6502 Syllabus pdf free download.

OBJECTIVES ME6502 Heat and Mass Transfer Syllabus:

To understand the mechanisms of heat transfer under steady and transient conditions.

To understand the concepts of heat transfer through extended surfaces.

To learn the thermal analysis and sizing of heat exchangers and to understand the basic concepts of mass transfer.

(Use of standard HMT data book permitted)

UNIT I CONDUCTION ME6502 Heat and Mass Transfer Syllabus

General Differential equation of Heat Conduction– Cartesian and Polar Coordinates – One Dimensional Steady State Heat Conduction –– plane and Composite Systems – Conduction with Internal Heat Generation – Extended Surfaces – Unsteady Heat Conduction – Lumped Analysis – Semi Infinite and Infinite Solids –Use of Heisler’s charts.

UNIT II CONVECTION ME6502 Heat and Mass Transfer Syllabus

Free and Forced Convection – Hydrodynamic and Thermal Boundary Layer. Free and Forced Convection during external flow over Plates and Cylinders and Internal flow through tubes .

UNIT III PHASE CHANGE HEAT TRANSFER AND HEAT EXCHANGERS Heat and Mass Transfer ME6502 Syllabus

Nusselt’s theory of condensation – Regimes of Pool boiling and Flow boiling. Correlations in boiling and condensation. Heat Exchanger Types – Overall Heat Transfer Coefficient – Fouling Factors – Analysis – LMTD method – NTU method.

UNIT IV RADIATION Heat and Mass Transfer ME6502 Syllabus

Black Body Radiation – Grey body radiation – Shape Factor – Electrical Analogy – Radiation Shields. Radiation through gases.

UNIT V MASS TRANSFER ME6502 Heat and Mass Transfer Syllabus

Basic Concepts – Diffusion Mass Transfer – Fick’s Law of Diffusion – Steady state Molecular Diffusion – Convective Mass Transfer – Momentum, Heat and Mass Transfer Analogy –Convective Mass Transfer Correlations.

Subject Name	Heat and Mass Transfer
Subject code	ME6502
Regulation	2013

ME6502 Heat and Mass Transfer Syllabus Click here to download

ME6502 Heat and Mass Transfer Notes

---

ME6502 Heat and Mass Transfer Important questions

---

ME6502 Heat and Mass Transfer Question Bank

ME6501 Computer Aided Design Syllabus 

ME6501 Computer Aided Design Syllabus Regulation 2013 Anna University free download. Computer Aided Design ME6501 Syllabus pdf free download.

OBJECTIVES ME6501 Computer Aided Design Syllabus:

• To provide an overview of how computers are being used in mechanical component design

UNIT I FUNDAMENTALS OF COMPUTER GRAPHICS ME6501 Computer Aided Design Syllabus

Product cycle- Design process- sequential and concurrent engineering- Computer aided design – CAD system architecture- Computer graphics – co-ordinate systems- 2D and 3D transformationshomogeneous coordinates – Line drawing -Clipping- viewing transformation

UNIT II GEOMETRIC MODELING ME6501 Syllabus Computer Aided Design 

Representation of curves- Hermite curve- Bezier curve- B-spline curves-rational curves- Techniques for surface modeling – surface patch- Coons and bicubic patches- Bezier and Bspline surfaces. Solid modeling techniques- CSG and B-rep

UNIT III VISUAL REALISM ME6501 Computer Aided Design Syllabus

Hidden – Line-Surface-Solid removal algorithms – shading – colouring – computer animation.

UNIT IV ASSEMBLY OF PARTS ME6501 Syllabus Computer Aided Design 

Assembly modelling – interferences of positions and orientation – tolerance analysismassproperty calculations – mechanism simulation and interference checking.

UNIT V CAD STANDARDS ME6501 Computer Aided Design Syllabus

Standards for computer graphics- Graphical Kernel System (GKS) – standards for
exchangeimages- Open Graphics Library (OpenGL) – Data exchange standards – IGES, STEP, CALSetc. – communication standards.

OUTCOMES ME6501 Syllabus Computer Aided Design :

• Upon completion of this course, the students can able to use computer and CAD software’s formodeling of mechanical components

TEXT BOOKS ME6501 Syllabus Computer Aided Design :

1. Ibrahim Zeid “Mastering CAD CAM” Tata McGraw-Hill Publishing Co.2007

REFERENCES ME6501 Computer Aided Design Syllabus:

1. Chris McMahon and Jimmie Browne “CAD/CAM Principles”, “Practice and Manufacturing management “ Second Edition, Pearson Education, 1999.

2. William M Neumann and Robert F.Sproul “Principles of Computer Graphics”, McGraw Hill Book Co. Singapore, 1989.

3. Donald Hearn and M. Pauline Baker “Computer Graphics”’. Prentice Hall, Inc, 1992.

4. Foley, Wan Dam, Feiner and Hughes – “Computer graphics principles & practice” Pearson Education – 2003.

Subject Name	Computer Aided Design
Subject code	ME6501
Regulation	2013

ME6501 Computer Aided Design Syllabus Click here to download

Computer Aided Design ME6501 Notes

---

ME6501 Computer Aided Design Important questions

---

ME6501 Computer Aided Design Question Bank