Category: Syllabus

AU COE Portal

Anna University Regulation 2021 Study Materials

Tags Important Questions, Notes, Question Paper, Syllabus

Important question Notes question bank Question Paper R-2021 Syllabus

MA3301 Fourier Series and Linear Programming

Post author By Mr. Padeepz
Post date November 18, 2022
No Comments on MA3301 Fourier Series and Linear Programming

MA3301 Fourier Series and Linear Programming Study Materials

Anna University – MA3301 Fourier Series and Linear Programming Regulation 2021 Syllabus, Notes, Important Questions, Question Paper with Answers, Previous Year Question Paper.

UNIT I FOURIER SERIES MA3301 Fourier Series and Linear Programming Syllabus

Dirichlet’s conditions – General Fourier series – Odd and even functions – Half range sine series
and cosine series – Root mean square value – Parseval’s identity–– Harmonic analysis.

UNIT II FOURIER TRANSFORMS MA3301 Fourier Series and Linear Programming Notes

Statement of Fourier integral theorem– Fourier transform pair – Fourier sine and
cosine transforms – Properties – Transforms of simple functions – Convolution theorem –
Parseval’s identity.

UNIT III LINEAR PROGRAMMING PROBLEMS MA3301 Fourier Series and Linear Programming Important Questions

Mathematical formulation – Graphical method – Simplex method – Artificial variable techniques –
Big M Method – Two phase Simplex method – Duality – Dual Simplex method.

UNIT IV TRANSPORTATION AND ASSIGNMENT PROBLEMS MA3301 Fourier Series and Linear Programming Question Paper

Matrix form – Loops in T.P – Initial basic feasible solutions – Transportation algorithm –
Degeneracy in T.P – Assignment and Routing problems.

UNIT V NON-LINEAR PROGRAMMING PROBLEMS MA3301 Fourier Series and Linear Programming Question Bank

Lagrange multipliers – Equality constraints – Inequality constraints – Kuhn – Tucker Conditions –
Quadratic programming

Syllabus	Click Here
Notes	Click Here
Important Questions	Click Here
Previous Year Question Paper	Click Here
Question Bank	Click Here

TEXT BOOKS: MA3301 Fourier Series and Linear Programming Important Questions

1. Grewal B.S., “Higher Engineering Mathematics”, 44th Edition, Khanna Publishers, New Delhi,
2018.
2. H.A. Taha, “Operations Research – An introduction”, 10th Edition, Pearson Education, New
Delhi, 2017.
3. Kanti Swarup, Guptha P.K. and Man Mohan, “Operations Research”, 5th Edition, Sultan
Chand & Sons, New Delhi, 2010.

REFERENCES: MA3301 Fourier Series and Linear Programming QB

1. Kreyszig E, “Advanced Engineering Mathematics”, 10th Edition, John Wiley, New Delhi,
India, 2016.
2. Ravindran, Philips and Solberg “Operations Research, Principles and Practice”, 2
nd
Edition, Wiley, , New Delhi, 2007.
3. Frederick S Hillier and Gerald J. Lieberman, “Introduction to Operations Research”, Mc
Graw Hill, New Delhi, 2017.
4. J.K.Sharma , ” Operations Research – Theory and Applications “, Mac Millan India Ltd ,
2
nd Edition , New Delhi , 2003.
5. Richard Bronson & Govindasami Naadimuthu, “Operations Research” (Schaum’s Outlines –
TMH Edition) Tata McGraw Hill, 2nd Edition, New Delhi, 2004.

AU COE Portal

Anna University Regulation 2021 Study Materials

Tags Important Questions, Notes, Question Paper, Syllabus

Important question Notes question bank Question Paper R-2021 Syllabus

AD3391 DATABASE DESIGN AND MANAGEMENT

Post author By Mr. Padeepz
Post date November 16, 2022
No Comments on AD3391 DATABASE DESIGN AND MANAGEMENT

AD3391 Database Design and Management Study Materials

Anna University – AD3391 Database Design and Management Regulation 2021 Syllabus, Notes, Important Questions, Question Paper with Answers, Previous Year Question Paper.

UNIT I CONCEPTUAL DATA MODELING 8 AD3391 Database Design and Management Syllabus

Database environment – Database system development lifecycle – Requirements collection –
Database design — Entity-Relationship model – Enhanced-ER model – UML class diagrams.

UNIT II RELATIONAL MODEL AND SQL 10 AD3391 Database Design and Management Notes

Relational model concepts — Integrity constraints — SQL Data manipulation – SQL Data definition –
Views — SQL programming.

UNIT III RELATIONAL DATABASE DESIGN AND NORMALIZATION AD3391 Database Design and Management Important Questions

ER and EER-to-Relational mapping – Update anomalies – Functional dependencies – Inference
rules – Minimal cover – Properties of relational decomposition – Normalization (upto BCNF).

UNIT IV TRANSACTION MANAGEMENT AD3391 Database Design and Management Question Bank

Transaction concepts – properties – Schedules – Serializability – Concurrency Control – Two-phase
locking techniques.

UNIT V OBJECT RELATIONAL AND NO-SQL DATABASES AD3391 Database Design and Management Question paper

Mapping EER to ODB schema – Object identifier – reference types – rowtypes – UDTs – Subtypes
and supertypes – user-defined routines – Collection types – Object Query Language; No-SQL: CAP
theorem – Document-based: MongoDB data model and CRUD operations; Column-based: Hbase data model and CRUD operations.

Syllabus	Click Here
Notes	Click Here
Important Questions	Click Here
Previous Year Question Paper	Click Here
Question Bank	Click Here

TEXT BOOKS: AD3391 Database Design and Management PDF

1. Thomas M. Connolly, Carolyn E. Begg, Database Systems – A Practical Approach to Design,
Implementation, and Management, Sixth Edition, Global Edition, Pearson Education, 2015.
2. Ramez Elmasri, Shamkant B. Navathe, Fundamentals of Database Systems, 7th Edition,
Pearson, 2017.

REFERENCES: AD3391 Database Design and Management IQ

1. Toby Teorey, Sam Lightstone, Tom Nadeau, H. V. Jagadish, “DATABASE MODELING AND
DESIGN – Logical Design”, Fifth Edition, Morgan Kaufmann Publishers, 2011.
2. Carlos Coronel, Steven Morris, and Peter Rob, Database Systems: Design, Implementation,
and Management, Ninth Edition, Cengage learning, 2012
3. Abraham Silberschatz, Henry F Korth, S Sudharshan, “Database System Concepts”, 6th
Edition, Tata Mc Graw Hill, 2011.
4. Hector Garcia-Molina, Jeffrey D Ullman, Jennifer Widom, “Database Systems:The Complete
Book”, 2nd edition, Pearson.
5. Raghu Ramakrishnan, “Database Management Systems”, 4th Edition, Tata Mc Graw Hill,
2010.

AU COE Portal

Anna University Regulation 2021 Study Materials

Tags Important Questions, Notes, Question Paper, Syllabus

Important question Notes question bank Question Paper R-2021 Syllabus

AS3361 Thermodynamics and Strength of Materials Laboratory

Post author By Mr. Padeepz
Post date October 11, 2022
No Comments on AS3361 Thermodynamics and Strength of Materials Laboratory

AS3361 Thermodynamics and Strength of Materials Laboratory

Anna University – AS3361 Thermodynamics and Strength of Materials Laboratory Regulation 2021 Syllabus , Notes , Lab manual, Important Questions, Question Paper with Answers Previous Year Question Paper.

LIST OF EXPERIMENTS AS3361 Thermodynamics and Strength of Materials Laboratory

1. Tension test on a mild steel rod
2. Double shear test on Mild steel and Aluminum rods
3. Torsion test on mild steel rod
4. Impact test on metal specimen
5. Hardness test on metals – Brinnell and Rockwell Hardness Number
6. Deflection test on beams
7. Compression test on helical springs
8. Strain Measurement using Rosette strain gauge
9. Effect of hardening- Improvement in hardness and impact resistance of steels.
10. Tempering- Improvement Mechanical properties Comparison
(i) Unhardened specimen
(ii) Quenched Specimen and
(iii) Quenched and tempered specimen.
11. Microscopic Examination of
(i) Hardened samples and
(ii) Hardened and tempered samples

OUTCOMES: AS3361 Thermodynamics and Strength of Materials Laboratory

 Analyse the Hardness and Tensile strength of the given material
 Examine the deformation and torsion strength of the given material
 Analyse the compression and shear strength of given materials

THERMODYNAMICS LABORATORY

LIST OF EXPERIMENTS AS3361 Thermodynamics and Strength of Materials Laboratory
1. Performance test on a 4-stroke engine
2. Valve timing of a 4 – stroke engine and port timing of a 2 stroke engine
3. Determination of effectiveness of a parallel flow heat exchanger
4. Determination of effectiveness of a counter flow heat exchanger
5. Determination of heating value of a fuel
6. Determination of specific heat of solid
7. Determination of thermal conductivity of solid.
8. Determination of thermal resistance of a composite wall.
9. COP test on a vapour compression refrigeration test rig
10. COP test on a vapour compression air-conditioning test rig

Syllabus	Click Here
Notes	Click Here
Lab Manual	Click Here
Important Questions	Click Here
Previous Year Question Paper	Click Here
Question Bank	Click Here

OUTCOMES: AS3361 Thermodynamics and Strength of Materials Laboratory
 Perform test on diesel/petrol engine
 Determine the properties of the fuels.
 Analyze the heat transfer properties of solid and composite walls

Anna University Regulation 2021 Study Materials

Tags Important Questions, Notes, Question Paper, Syllabus

Important question news Notes question bank Question Paper R-2021 Syllabus

CE3362 Fluid Mechanics and Machinery Laboratory

Post author By Mr. Padeepz
Post date October 11, 2022
No Comments on CE3362 Fluid Mechanics and Machinery Laboratory

CE3362 Fluid Mechanics and Machinery Laboratory

Anna University – CE3362 Fluid Mechanics and Machinery Laboratory Regulation 2021 Syllabus , Notes , Lab manual, Important Questions, Question Paper with Answers Previous Year Question Paper.

LIST OF EXPERIMENTS CE3362 Fluid Mechanics and Machinery Laboratory

A. FLOW MEASUREMENT
1. Verification of Bernoulli’s theorem
2. Flow through Orifice/Venturi meter
3. Friction factor for flow through pipes
4. Impact of jet on fixed plate

B. METACENTRE
5. Determination of metacentric height

C. PUMPS
6. Characteristics of Centrifugal pump
7. Characteristics of Gear pump
8. Characteristics of Submersible pump
9. Characteristics of Reciprocating pump

D. TURBINES
10. Characteristics of Pelton wheel turbine
11. Characteristics of Francis turbine

COURSE OBJECTIVES: CE3362 Fluid Mechanics and Machinery Laboratory

 Upon Completion of this subject, the students can able to have hands on experience in flow
measurements using different devices.
 Also perform calculation related to losses in pipes and also perform characteristic study of pumps, turbines etc.,

COURSE OUTCOMES: CE3362 Fluid Mechanics and Machinery Laboratory

On completion of the course, the student is expected to be able to
CO1 Verify and apply Bernoulli equation for flow measurement like Orifice/Venturi meter.
CO2 Measure friction factor in pipes and compare with Moody diagram and verify momentum
conservation law.
CO3 Determine the performance characteristics of Rotodynamic pumps.
CO4 Determine the performance characteristics of positive displacement pumps.
CO5 Determine the performance characteristics of turbines.

Syllabus	Click Here
Notes	Click Here
Lab Manual	Click Here
Important Questions	Click Here
Previous Year Question Paper	Click Here
Question Bank	Click Here

REFERENCES: CE3362 Fluid Mechanics and Machinery Laboratory

1. Hydraulic Laboratory Manual, Centre for Water Resources, Anna University, 2015.
2. Modi P.N. and Seth S.M., Hydraulics and Fluid Mechanics. Standard Book House. NewDelhi,
2017.
3. Subramanya K, Fluid Mechanics and Hydraulic Machines, Tata McGraw Hill Edu. Pvt. Ltd., 2011

Anna University Regulation 2021 Study Materials

Tags Important Questions, Notes, Question Paper, Syllabus

Important question Notes question bank Question Paper R-2021 Syllabus

AE3302 Aircraft Systems and Instruments

Post author By Mr. Padeepz
Post date October 11, 2022
No Comments on AE3302 Aircraft Systems and Instruments

AE3302 Aircraft Systems and Instruments

Anna University – AE3302 Aircraft Systems and Instruments Regulation 2021 Syllabus , Notes , Important Questions, Question Paper with Answers Previous Year Question Paper.

UNIT I AIRCRAFT SYSTEMS AE3302 Aircraft Systems and Instruments Syllabus

Hydraulic systems – Study of typical systems – components – Hydraulic systems controllers – Modes
of operation – Pneumatic systems – Working principles – Typical Pneumatic Power system – Brake
system – Components, Landing Gear Systems – Classification – Shock absorbers – Retractive
mechanism.

UNIT II AIRPLANE CONTROL SYSTEMS AE3302 Aircraft Systems and Instruments Notes

Conventional Systems – Power assisted and fully powered flight controls – Power actuated systems
– Engine control systems – Push pull rod system – operating principles – Modern control systems –
Digital fly by wire systems – Auto pilot system.

UNIT III ENGINE SYSTEMS AE3302 Aircraft Systems and Instruments Important Questions

Piston and Jet Engines- Fuel systems – Components – Multi-engine fuel systems, lubricating
systems – Starting and Ignition systems.

UNIT IV AIRCONDITIONING AND PRESSURIZING SYSTEM AE3302 Aircraft Systems and Instruments Question Paper

Basic Air Cycle systems – Vapour Cycle Systems, Boot-strap air cycle system – Evaporative vapour
cycle systems – Evaporation air cycle systems – Oxygen systems – Fire extinguishing system and
smoke detection system, Deicing and anti-icing system.

UNIT V AIRCRAFT INSTRUMENTS Aircraft Systems and Instruments Question Bank

Flight Instruments and Navigation Instruments – Accelerometers, Air speed Indicators – Mach
Meters – Altimeters – Gyroscopic Instruments– Principles and operation – Study of various types of
engine instruments – Tachometers – Temperature and Pressure gauges.

Syllabus	Click Here
Notes	Click Here
Important Questions	Click Here
Previous Year Question Paper	Click Here
Question Bank	Click Here

TEXT BOOKS: AE3302 Aircraft Systems and Instruments Notes

1. Mekinley, J.L. and R.D. Bent, Aircraft Power Plants, McGraw Hill, 1993.
2. Pallet, E.H.J. Aircraft Instruments & Principles, Pitman & Co, 1993.

REFERENCES: AE3302 Aircraft Systems and Instruments Important Questions

1. Handbooks of Airframe and Power plant Mechanics, US dept. of Transportation, Federal,
Aviation Administration, the English Book Store, New Delhi, 1995.
2. McKinley, J.L. and Bent R.D. Aircraft Maintenance & Repair, McGraw Hill, 1993.
3. Teager, S, “Aircraft Gas Turbine technology, McGraw Hill 1997.

Anna University Regulation 2021 Study Materials

Tags Important Questions, Notes, Question Paper, Syllabus

Important question Notes question bank Question Paper R-2021 Syllabus

AE3301 Elements of Aeronautical Engineering

Post author By Mr. Padeepz
Post date October 11, 2022
No Comments on AE3301 Elements of Aeronautical Engineering

AE3301 Elements of Aeronautical Engineering

Anna University – AE3301 Elements of Aeronautical Engineering Regulation 2021 Syllabus , Notes , Important Questions, Question Paper with Answers Previous Year Question Paper.

UNIT I HISTORY OF FLIGHT AE3301 Elements of Aeronautical Engineering Syllabus

Balloon flight-ornithopter-Early Airplanes by Wright Brothers, biplanes and monoplanes,
Developments in aerodynamics, materials, structures and propulsion over the years.

UNIT II AIRCRAFT CONFIGURATIONS AND ITS CONTROLS AE3301 Elements of Aeronautical Engineering Notes

Different types of flight vehicles, Classifications-Components of an airplane and their functionsConventional control, powered control- Basic instruments for Flying-Typical systems for control
actuation.

UNIT III BASICS OF AERODYNAMICS AE3301 Elements of Aeronautical Engineering Important Questions

Physical Properties and structures of the Atmosphere, Temperature, pressure and altitude
relationships, Newton’s Law of Motions applied to Aeronautics-Evolution of lift, drag and moment.
Aerofoils, Mach number, Manoeuvres.

UNIT IV BASICS OF AIRCRAFT STRUCTURES AE3301 Elements of Aeronautical Engineering Question Paper

General types of construction, Monocoque, semi-monocoque and geodesic constructions, typical
wing and fuselage structure. Metallic and non-metallic materials. Use of Aluminium alloy, titanium,
stainless steel and composite materials. Stresses and Strains-Hooke’s law- stress-strain diagramselastic Constants-Factor of Safety.

UNIT V BASICS OF PROPULSION AE3301 Elements of Aeronautical Engineering Notes

Basic ideas about piston, turboprop and jet engines – use of propeller and jets for thrust Production
– Comparative merits, Principle of operation of rocket, types of rocket and typical applications,
Exploration into space.

Syllabus	Click Here
Notes	Click Here
Important Questions	Click Here
Previous Year Question Paper	Click Here
Question Bank	Click Here

TEXT BOOKS: AE3301 Elements of Aeronautical Engineering Important Questions

1. Anderson, J.D., Introduction to Flight, McGraw-Hill; 8th edition, 2015
2. E Rathakrishnan, “Introduction to Aerospace Engineering: Basic Principles of Flight”, John
Wiley, NJ, 2021
3. Stephen.A. Brandt, Introduction to aeronautics: A design perspective, 2nd edition, AIAA
Education Series, 2004.

REFERENCES: AE3301 EAE Important Questions

1. Sadhu Singh, “Internal Combustion Engines and Gas Turbine”, SS Kataraia & Sons, 2015
2. Kermode, “Flight without Formulae”, Pitman; 4th revised edition 1989.

Anna University Regulation 2021 Study Materials

Tags Important Questions, Notes, Question Paper, Syllabus

Important question Notes question bank Question Paper R-2021 Syllabus

AE3352 Solid Mechanics

Anna University – AE3352 Solid Mechanics Regulation 2021 Syllabus , Notes , Important Questions, Question Paper with Answers Previous Year Question Paper.

UNIT I CONCURRENT AND NON-CONCURRENT AE3352 Solid Mechanics Syllabus

Introduction, Concept of FBD, Coplanar Concurrent force system, Moments, Coplanar NonConcurrent force system and Support Reactions – Application Problems.

UNIT II SHEAR FORCE AND BENDING MOMENT, SECOND AREA MOMENT PROBLEMS AE3352 Solid Mechanics Notes

Analysis of Simple Truss, Shear Force and Bending Moment Diagrams, C.G. and M.I of Plane
areas.

UNIT III AXIAL BAR AND MATERIAL MODULUS AE3352 Solid Mechanics Important Questions

Simple stress and Strain, Mechanical Properties of Materials, Statically Determinate Problems
and Elastic Constants, Tension, Compression, and Shear, Elasticity, Plasticity and Creep,
Hooke’s Law. Allowable stresses.

UNIT IV BEAM BENDING AND TORSION AE3352 Solid Mechanics Question Paper

Axially loaded members, Statically indeterminate structures, Thermal effects, misfits, and Prestrains. Torsion of circular bar, Transmission of power by circular shafts. Stresses in beams, Pure
bending and Nonuniform bending, Design of beams for bending stresses,
Shear stresses in beams of rectangular cross section.

UNIT V STRESS TRANSFORMATION, DEFLECTION OF BEAM AND BUCKLING OF COLUMN AE3352 Solid Mechanics Question Bank

Plane stress, Principal stresses, Mohr’s circle and Hooke’s law for plane stresses. Spherical and
Cylindrical pressure vessels. Deflection of beams, Column buckling.

Syllabus	Click Here
Notes	Click Here
Important Questions	Click Here
Previous Year Question Paper	Click Here
Question Bank	Click Here

TEXT BOOKS: AE3352 Solid Mechanics Important Questions

1. Egor P Popov, Mechanics of Materials, Pearson, 2015.
2. James M. Gere, Mechanics of Materials, Sixth Edition, Thomson Learning, 2004.
3. Ferdinand Beer, E. Russell Johnston Jr., John Dewolf, David Mazurek, Mechanics of
Materials, McGraw Hill Education,2014.
4. Russell C Hibbeler, Mechanics of Materials, Pearson, 2013.

REFERENCES: AE3352 Solid Mechanics Notes

1. William F. Riley, Leroy D. Sturges, Don H. Morris, Mechanics of Materials, John Wiley &
Sons, 1998.
2. Advanced Mechanics of Materials, 6th Edition, authored by Arthur P. Boresi, Richard J.
Schmidt, bearing ISBN: 978-81-947263-9-5, Published by Wiley India Pvt. Limited.
3. Mechanics of Materials, 5
th Edition, authored by Timothy A. Philpot, Jeffery S. Thomas,
bearing ISBN: 978-1-119-85997-0, Published by Wiley India Pvt. Limited.

Anna University Regulation 2021 Study Materials

Tags Important Questions, Notes, Question Paper, Syllabus

Important question Notes question bank Question Paper R-2021 Syllabus

AE3351 Aero Engineering Thermodynamics

Post author By Mr. Padeepz
Post date October 11, 2022
No Comments on AE3351 Aero Engineering Thermodynamics

AE3351 Aero Engineering Thermodynamics

Anna University – AE3351 Aero Engineering Thermodynamics Regulation 2021 Syllabus , Notes , Important Questions, Question Paper with Answers Previous Year Question Paper.

UNIT I FUNDAMENTAL CONCEPT AND FIRST LAW AE3351 Aero Engineering Thermodynamics Syllabus

Concept of continuum, macroscopic approach, thermodynamic systems – closed, open and isolated.
Property, state, path and process, quasi-static process, work, internal energy, enthalpy, specific heat
capacities and heat transfer, SFEE, application of SFEE to jet engine components, First law of
thermodynamics, relation between pressure, volume and temperature for various processes, Zeroth
law of thermodynamics.

UNIT II SECOND LAW AND ENTROPY AE3351 Aero Engineering Thermodynamics notes

Second law of thermodynamics – Kelvin Planck and Clausius statements of second law. Reversibility
and Irreversibility, Thermal reservoir, Carnot theorem. Carnot cycle, Reversed Carnot cycle,
efficiency, COP, Thermodynamic temperature scale – Clausius inequality, Concept of entropy,
Entropy changes for various processes.

UNIT III AIR STANDARD CYCLES AE3351 Aero Engineering Thermodynamics Important Questions

Otto, Diesel, Dual, Ericsson, Atkinson, Stirling and Brayton cycles – Air standard efficiency – Mean
effective pressure.

UNIT IV FUNDAMENTALS OF VAPOUR POWER CYCLES AE3351 Aero Engineering Thermodynamics Question paper

Properties of pure substances – solid, liquid and vapour phases, phase rule, p-v, p-T, T-v, T-s, h-s
diagrams, p-v-T surfaces, thermodynamic properties of steam – calculations of work done and heat
transfer in non-flow and flow processes – standard Rankine cycle, Reheat and Regeneration cycle.
Heat rate, Specific steam consumption, Tonne of refrigeration.

UNIT V BASICS OF PROPULSION AND HEAT TRANSFER AE3351 Aero Engineering Thermodynamics Question bank

Classification of jet engines – basic jet propulsion arrangement – Engine station number, thrust
equation – Specific thrust, SFC, TSFC, specific impulse, actual cycles, isentropic efficiencies of jet
engine components, polytropic efficiency, conduction in parallel, radial and composite wall, Basics
of convective and radiation heat transfer.

Syllabus	Click Here
Notes	Click Here
Important Questions	Click Here
Previous Year Question Paper	Click Here
Question Bank	Click Here

TEXT BOOKS: AE3351 Aero Engineering Thermodynamics Important Questions

1. Nag.P.K., “Engineering Thermodynamics”, Tata McGraw-Hill, New Delhi, 2013.
2. Rathakrishnan E., “Fundamentals of Engineering Thermodynamics”, Prentice-Hall India, 2005.
3. Yunus A. Cengel and Michael A. Boles, “Thermodynamics: An Engineering Approach”
McGraw-Hill Science/Engineering/Math; 7thedition 2010.

REFERENCES: AE3351 Aero Engineering Thermodynamics notes

1. Arora C.P, “Thermodynamics”, Tata McGraw-Hill, New Delhi, 2003.
2. Holman.J.P., “Thermodynamics”, 3rd Edition, McGraw-Hill, 2007.
3. Merala C, Pother, Craig W, Somerton, “Thermodynamics for Engineers”, Schaum Outline
Series,Tata McGraw-Hill, New Delhi, 2004.
4. Ramalingam K.K. “Thermodynamics”, Sci-Tech Publications, 2006
5. Venwylen and Sontag, “Classical Thermodynamics”, Wiley Eastern, 1987