Categories
r2017 notes

CE8603 Notes Irrigation Engineering Regulation 2017 Anna University

CE8603 Notes Irrigation Engineering

CE8603 Notes Irrigation Engineering Regulation 2017 Anna University free download. Irrigation Engineering Notes CE8603 pdf free download.

OBJECTIVE: CE8603 Notes Irrigation Engineering

 The student is exposed to different phases in irrigation practices and Planning and management of irrigation. Further they will be imparted required knowledge on Irrigation storage and distribution canal system and Irrigation management.

OUTCOMES: CE8603 Notes Irrigation Engineering

Students will be able to
 Have knowledge and skills on crop water requirements.
 Understand the methods and management of irrigation.
 Gain knowledge on types of Impounding structures
 Understand methods of irrigation including canal irrigation.
 Get knowledge on water management on optimization of water use.

TEXTBOOKS: CE8603 Notes Irrigation Engineering

1. Dilip Kumar Majumdar, “Irrigation Water Management”, Prentice-Hall of India, New Delhi, 2008.
2. Punmia B.C., et. al; Irrigation and water power Engineering, Laxmi Publications, 16th Edition, New Delhi, 2009
3. Garg S. K., “Irrigation Engineering and Hydraulic structures”, Khanna Publishers, 23rd Revised Edition, New Delhi, 2009

REFERENCES: CE8603 Irrigation Engineering

1. Duggal, K.N. and Soni, J.P., “Elements of Water Resources Engineering”, New Age International Publishers, 2005
2. Linsley R.K. and Franzini J.B, “Water Resources Engineering”, McGraw-Hill Inc, 2000
3. Chaturvedi M.C., “Water Resources Systems Planning and Management”, Tata McGraw-Hill Inc., New Delhi, 1997.

4. Sharma R.K.. “Irrigation Engineering”, S.Chand & Co. 2007.
5. Michael A.M., Irrigation Theory and Practice, 2nd Edition, Vikas Publishing House Pvt. Ltd., Noida, Up, 2008
6. Asawa, G.L., “Irrigation Engineering”, NewAge International Publishers, New Delhi, 2000. 7. Basak, N.N, “Irrigation Engineering”, Tata McGraw Hill Publishing Co. New Delhi,1999

Subject name Irrigation Engineering
Short Name IE
Semester 6
Subject Code CE8603
Regulation 2017 regulation

CE8603 Notes Irrigation Engineering Click Here To Download

CE8603 Irrigation Engineering Syllabus

CE8603 Irrigation Engineering Important Questions

CE8603 Irrigation Engineering Question Bank

CE8603 Irrigation Engineering Question Paper

Categories
Syllabus UG syllabus R-2017

CE8603 Syllabus Irrigation Engineering Regulation 2017 Anna University

CE8603 Syllabus Irrigation Engineering

CE8603 Syllabus Irrigation Engineering Regulation 2017 Anna University free download. Irrigation Engineering Syllabus CE8603 pdf free download.

UNIT I CROP WATER REQUIREMENT 9 CE8603 Syllabus Irrigation Engineering

Need and classification of irrigation- historical development and merits and demerits of irrigation-types of crops-crop season-duty, delta and base period- consumptive use of crops- estimation of Evapotranspiration using experimental and theoretical methods

UNIT II IRRIGATION METHODS 9 CE8603 Syllabus Irrigation Engineering

Tank irrigation – Well irrigation – Irrigation methods: Surface and Sub-Surface and Micro Irrigation – design of drip and sprinkler irrigation – ridge and furrow irrigation-Irrigation scheduling – Water distribution system- Irrigation efficiencies.

UNIT III DIVERSION AND IMPOUNDING STRUCTURES 9 CE8603 Irrigation Engineering

Types of Impounding structures – Gravity dam – Forces on a dam -Design of Gravity dams; Earth dams, Arch dams- Diversion Head works – Weirs and Barrages-

UNIT IV CANAL IRRIGATION 9 CE8603 Irrigation Engineering

Canal regulations – direct sluice – Canal drop – Cross drainage works-Canal outlets – Design of prismatic canal-canal alignments-Canal lining – Kennedy’s and Lacey’s Regime theory-Design of unlined canal

UNIT V WATER MANAGEMENT IN IRRIGATION 9 CE8603 Irrigation Engineering

Modernization techniques- Rehabilitation – Optimization of water use-Minimizing water losses- On form development works-Participatory irrigation management- Water resources associations- Changing paradigms in water management-Performance evaluation-Economic aspects of irrigation

Subject name Irrigation Engineering
Short Name IE
Semester 6
Subject Code CE8603
Regulation 2017 regulation

CE8603 Syllabus Irrigation Engineering Click Here To Download

CE8603 Irrigation Engineering Notes

CE8603 Irrigation Engineering Important Questions

CE8603 Irrigation Engineering Question Bank

CE8603 Irrigation Engineering Question Paper

Categories
r2017 notes

CE8602 Notes Structural Analysis 2 Regulation 2017 Anna University

CE8602 Notes Structural Analysis 2

CE8602 Notes Structural Analysis 2 Regulation 2017 Anna University free download. Structural Analysis 2 Notes CE8602 pdf free download.

OBJECTIVES : CE8602 Notes Structural Analysis 2

 To learn the method of drawing influence lines and its uses in various applications like
beams and plane trusses.  To analyse the arches, suspension bridges and space trusses.  Also to learn Plastic analysis of beams and rigid frames.

OUTCOMES: CE8602 Notes Structural Analysis 2

Students will be able to
 Draw influence lines for statically determinate structures and calculate critical stress resultants.
 Understand Muller Breslau principle and draw the influence lines for statically indeterminate beams.
 Analyse of three hinged, two hinged and fixed arches.
 Analyse the suspension bridges with stiffening girders
 Understand the concept of Plastic analysis and the method of analyzing beams and rigid frames.

TEXTBOOKS: CE8602 Notes Structural Analysis 2

1. Bhavikatti,S.S, Structural Analysis,Vol.1 & 2, Vikas Publishing House Pvt.Ltd., NewDelhi-4, 2014.
2. Punmia.B.C, Ashok Kumar Jain and Arun Kumar Jain, Theory of structures, Laxmi, Publications,2004.
3. Vazrani.V.N And Ratwani,M.M, Analysis of Structures, Vol.II, Khanna Publishers,2015.

REFERENCES: CE8602 Structural Analysis 2

1. Negi.L.S and Jangid R.S., Structural Analysis, Tata McGraw-Hill Publishers, 2004.
2. Reddy C.S., Basic Structural Analysis, Tata McGraw Hill Publishing Co.Ltd.2002.
3. Gambhir.M.L., Fundamentals of Structural Mechanics and Analysis, PHIL earning Pvt. Ltd.,2011.
4. Prakash Rao D.S., Structural Analysis, Universities Press,1996.

Subject name Structural Analysis 2
Short Name SA 2
Semester 6
Subject Code CE8602
Regulation 2017 regulation

CE8602 Notes Structural Analysis 2 Click Here To Download 

CE8602 Structural Analysis 2 Syllabus

CE8602 Structural Analysis 2 Important Questions

CE8602 Structural Analysis 2 Question Bank

CE8602 Structural Analysis 2 Question Paper

Categories
Syllabus UG syllabus R-2017

CE8602 Syllabus Structural Analysis 2 Regulation 2017 Anna University

CE8602 Syllabus Structural Analysis 2

CE8602 Syllabus Structural Analysis 2 Regulation 2017 Anna University free download. Structural Analysis 2 Syllabus CE8602 pdf free download.

UNITI INFLUENCE LINES FOR DETERMINATE BEAMS 9 CE8602 Syllabus Structural Analysis 2

Influence lines for reactions in statically determinate beams – Influence lines for shear force and bending moment – Calculation of critical stress resultants due to concentrated and distributed moving loads – absolute maximum bending moment – influence lines for member forces in pin jointed plane frames.

UNITII INFLUENCE LINES FOR INDETERMINATE BEAMS 9 CE8602 Syllabus Structural Analysis 2

Muller Breslau’s principle– Influence line for Shearing force, Bending Moment and support reaction components of propped cantilever, continuous beams (Redundancy restricted to one), and fixed beams.

UNIT III ARCHES 9 CE8602 Structural Analysis 2

Arches – Types of arches – Analysis of three hinged, two hinged and fixed arches – Parabolic and circular arches – Settlement and temperature effects.

UNIT IV CABLES AND SUSPENSION BRIDGES 9 CE8602 Syllabus

Equilibrium of cable – length of cable – anchorage of suspension cables – stiffening girders – cables with three hinged stiffening girders – Influence lines for three hinged stiffening girders.

UNITV PLASTIC ANALYSIS 9 CE8602 Syllabus SA 2

Plastic theory – Statically indeterminate structures – Plastic moment of resistance – Plastic modulus – Shape factor – Load factor – Plastic hinge and mechanism – collapse load – Static and kinematic methods – Upper and lower bound theorems – Plastic analysis of indeterminate beams and frames.

Subject name Structural Analysis 2
Short Name SA 2
Semester 6
Subject Code CE8602
Regulation 2017 regulation

CE8602 Syllabus Structural Analysis 2 Click Here To Download

CE8602 Structural Analysis 2 Notes

CE8602 Structural Analysis 2 Important Questions

CE8602 Structural Analysis 2 Question Bank

CE8602 Structural Analysis 2 Question Paper

Categories
r2017 notes

CE8601 Notes Design of Steel Structural Elements Regulation 2017 Anna University

CE8601 Notes Design of Steel Structural Elements

CE8601 Notes Design of Steel Structural Elements Regulation 2017 Anna University free download. Design of Steel Structural Elements Notes CE8601 pdf free download.

OBJECTIVE: CE8601 Notes Design of Steel Structural Elements

 To introduce the students to limit state design of structural steel members subjected to compressive, tensile and bending loads, including connections. Design of structural systems such as roof trusses, gantry girders as per provisions of current code (IS 800 – 2007) of practice for working stress and Limit state Method.

OUTCOMES: CE8601 Notes Design of Steel Structural Elements

Students will be able to  Understand the concepts of various design philosophies  Design common bolted and welded connections for steel structures  Design tension members and understand the effect of shear lag. CE8601 Notes Design of Steel Structural Elements Understand the design concept of axially loaded columns and column base connections.  Understand specific problems related to the design of laterally restrained and unrestrained steel beams.

TEXTBOOKS: CE8601 Notes Design of Steel Structural Elements

1. Subramanian.N, “Design of Steel Structures”, Oxford University Press, New Delhi, 2013.
2. Gambhir. M.L., “Fundamentals of Structural Steel Design”, McGraw Hill Education India Pvt. Ltd., 2013
3. Duggal. S.K, “Limit State Design of Steel Structures”, Tata McGraw Hill Publishing Company, 2005

REFERENCES: CE8601 Notes Design of Steel Structural Elements

1. Narayanan.R.et.al. “Teaching Resource on Structural Steel Design”, INSDAG, Ministry of Steel Publications, 2002
2. Sai Ram. K.S. “Design of Steel Structures “ Dorling Kindersley (India) Pvt. Ltd., New Delhi, 2nd Edition, 2015, www.pearsoned.co.in/kssairam
3. Shiyekar. M.R., “Limit State Design in Structural Steel”, Prentice Hall of India Pvt. Ltd, Learning Pvt. Ltd., 2nd Edition, 2013 CE8601 Notes Design of Steel Structural Elements
4. Bhavikatti.S.S, “Design of Steel Structures” By Limit State Method as per IS:800– 2007, IK International Publishing House Pvt. Ltd., 2009
5. Shah.V.L. and Veena Gore, “Limit State Design of Steel Structures”, IS 800–2007, Structures Publications, 2009.
6. IS800 :2007, General Construction in Steel – Code of Practice, (Third Revision), Bureau of Indian Standards, New Delhi, 2007
7. SP 6(1) Hand book on structural Steel Sections CE8601 Notes Design of Steel Structural Elements

Subject name Design of Steel Structural Elements
Short Name DSSE
Semester 6
Subject Code CE8601
Regulation 2017 regulation

CE8601 Notes Design of Steel Structural Elements Click Here To Download 

CE8601 Design of Steel Structural Elements Syllabus

CE8601 Design of Steel Structural Elements Important Questions

CE8601 Design of Steel Structural Elements Question Bank

CE8601 Design of Steel Structural Elements Question Paper

Categories
Syllabus UG syllabus R-2017

CE8601 Syllabus Design of Steel Structural Elements Regulation 2017 Anna University

CE8601 Syllabus Design of Steel Structural Elements

CE8601 Syllabus Design of Steel Structural Elements Regulation 2017 Anna University free download. Design of Steel Structural Elements Syllabus CE8601 pdf free download.

UNIT I INTRODUCTION AND ALLOWABLE STRESS DESIGN CE8601 Syllabus Design of Steel Structural Elements

Structural steel types – Mechanical Properties of structural steel- Indian structural steel products-Steps involved in the Deign Process -Steel Structural systems and their Elements- -Type of Loads on Structures and Load combinations- Code of practices, Loading standards and Specifications – Concept of Allowable Stress Method, and Limit State Design Methods for Steel structures-Relative advantages and Limitations-Strengths and Serviceability Limit states.
Allowable stresses as per IS 800 section 11 -Concepts of Allowable stress design for bending and Shear –Check for Elastic deflection-Calculation of moment carrying capacity –Design of Laterally supported Solid Hot Rolled section beams-Allowable stress deign of Angle Tension and Compression Members and estimation of axial load carrying capacity.

UNIT II CONNECTIONS IN STEEL STRUCTURES CE8601 Syllabus Design of Steel Structural Elements

Type of Fasteners- Bolts Pins and welds- Types of simple bolted and welded connections Relative advantages and Limitations-Modes of failure-the concept of Shear lag-efficiency of joints- Axially loaded bolted connections for Plates and Angle Members using bearing type bolts –Prying forces and Hanger connection– Design of Slip critical connections with High strength Friction Grip bolts.- Design of joints for combined shear and Tension- Eccentrically Loaded Bolted Bracket Connections- Welds-symbols and specifications- Effective area of welds-Fillet and but Welded connections-Axially Loaded connections for Plate and angle truss members and Eccentrically Loaded bracket connections.

UNIT III TENSION MEMBERS CE8601 Syllabus Design of Steel Structural Elements

Tension Members – Types of Tension members and sections –Behaviour of Tension Members-modes of failure-Slenderness ratio- Net area – Net effective sections for Plates ,Angles and Tee in tension –Concepts of Shear Lag- Design of plate and angle tension members-design of built up tension Members-Connections in tension members – Use of lug angles – Design of tension splice.

UNIT IV COMPRESSION MEMBERS CE8601 Syllabus Design of Steel Structural Elements

Types of compression members and sections–Behaviour and types of failures-Short and slender columns- Current code provisions for compression members- Effective Length, Slenderness ratio –Column formula and column curves- Design of single section and compound Angles-Axially Loaded solid section Columns- Design of Built up Laced and Battened type columns – Design of column bases – Plate and Gusseted bases for Axially loaded colums- Splices for colums.

UNIT V DESIGN OF FLEXURAL MEMBERS CE8601 Syllabus Design of Steel Structural Elements

Types of steel Beam sections- Behaviour of Beams in flexure- Codal Provisions – Classification of cross sections- Flexural Strength and Lateral stability of Beams –Shear Strength-Web Buckling, Crippling and defection of Beams- Design of laterally supported Beams- Design of solid rolled section Beams- Design of Plated beams with cover plates – Design Strength of Laterally
unsupported Beams – Design of laterally unsupported rolled section Beams- Purlin in Roof Trusses-Design of Channel and I section Purlins.

Subject name Design of Steel Structural Elements
Short Name DSSE
Semester 6
Subject Code CE8601
Regulation 2017 regulation

CE8601 Syllabus Design of Steel Structural Elements Click Here To Download

CE8601 Design of Steel Structural Elements Notes

CE8601 Design of Steel Structural Elements Important Questions

CE8601 Design of Steel Structural Elements Question Bank

CE8601 Design of Steel Structural Elements Question Paper

Categories
grace mark

Anna University Grace Mark Details

Anna University Grace Mark Details For Individual Subjects are Updated in this Page Regularly

Anna University Grace Mark Announced

Anna University Grace Mark Request Form

Anna University Grace Mark Details For April May 2023

Anna University Grace Mark Details For April May 2022

Anna University Grace Mark Details For Nov Dec 2021

 

Other Subject Grace Mark Details Will Be uploaded Soon

Anna University Grace Marks in Semester Exams are given to the questions which have mistakes done by anna university. Grace Marks are allocated for wrong questions, incorrect problems, Missing Data, out of syllabus questions, Printing Mistakes, Spelling Mistakes, Repeated Question Number.

Categories
Result

Anna University Distance Education Revaluation Result Published

August / September 2019 Examinations Revaluation Result Published

Anna University Distance Education: August / September 2019 Examinations Revaluation Result Published

Anna University Distance Education: August / September 2019 Examinations Revaluation Result Latest updates from Padeepz

Students have got their results through SMS as well as many students have checked their results through aucoe.annauniv.edu and coe1 Student login. It was announced that Affiliated Colleges will receive the results in PDF as well in respective colleges. 

Anna University Distance Education Revaluation Result  Published
Padeepz Result Update


Check Your CGPA Here

How To Easily Pass Arrear Exam

Follow Our Youtube Channel And Get Tips To Pass Arrear Exams Easily Click Here

Keyword search terms:

Anna University Revaluation Results

April May 2019 Revaluation Results Anna University

Anna University Revaluation Results April/May 2019 date

Categories
Important question

EE8251 Circuit Theory Important questions Regulation 2017 Anna University

EE8251 Circuit Theory Important Questions

EE8251 Circuit Theory Important questions Regulation 2017 Anna University free download. Circuit Theory CT EE8251 Important questions pdf free download.

Sample EE8251 Circuit Theory Important questions: 

Define Ohm’s Law .
2. State Kirchhoff’s Laws.
3. The resistance of 1.5Ω and 3.5Ω are connected in parallel and this parallel combination is connected in series with a resistance of1.95 EE8251 Circuit Theory Important questions
Ω. Calculate the equivalent resistance value.
4. Summarize the classifications of Circuit elements.
5. Find ‘R’ in the circuit shown below.

(i) Derive and list the expressions for resistors in series and
parallel. (6 marks) EE8251 Circuit Theory Important questions
(ii) Two 50 ohms resistors are connected in series .When a resistor R is connected across one of them, the total circuit resistance is 60 ohms. Calculate the value of R. If the supply voltage across the above circuit is 60V, find the current passing through individual resistance. EE8251 Circuit Theory Important questions

Calculate the equivalent current source for a voltage source of 10V in series with a 60ohm resistance.
3. Illustrate the equivalent voltage source for a current source of 15A when connected in parallel with 5 ohm resistance EE8251 CT Important questions
4. Given that the resistors Ra, Rb and Rc are connected electrically in star. Formulate the equations for resistors in equivalent delta
5. Three resistors Rab, Rbc and Rca are connected in delta. Re-write the expression for resistors in equivalent star EE8251 CT Important questions
6. How will you express the Norton’s equivalent circuit from Thevenin’s equivalent circuit?
7. Let a network has Thevenin’s equivalent circuit with source of 5Vrmsand impedance of 50-j30Ω.Find the optimum value of load to derive maximum power from the network.

Subject name Circuit Theory
Subject Code EE8251
Regulation 2017 Regulation

EE8251 Circuit Theory Important questions  Click Here to Download

EE8251 Circuit Theory Online Classes

EE8251 Circuit Theory Syllabus

EE8251 Circuit Theory Notes

EE8251 Circuit Theory Question Bank

Categories
ECE question bank

EC8453 Question Bank Linear Integrated Circuits Regulation 2017 Anna University

EC8453 Question Bank Linear Integrated Circuits

EC8453 Question Bank Linear Integrated Circuits Regulation 2017 Anna University free download. Linear Integrated Circuits Question Bank EC8453 pdf free download.

Sample EC8453 Question Bank Linear Integrated Circuits

(i) Derive the functional parameters for an inverting mode negative feedback gain circuit with a 741op-amp in IC inverting mode, with R1=1Kohm, Rf=40Kohm and compute Af, Rif, Rof, BW, offset voltage.

(ii) Discuss briefly on the differential mode Instrumentation amplifier. EC8453 Question Bank Linear Integrated Circuits

Examine the working principle of BJT differential amplifier with active load.

(i) Compose the concept of Widlar current source used in op-amp circuit with suitable circuit diagram and necessary equations.
(ii) Justify the preference of active load over passive load.

Write note about LF155 JFET input operational amplifier and TL082 wide bandwidth dual JFET input operational amplifier with necessary diagram. EC8453 Question Bank Linear Integrated Circuits

State and explain about CMRR, Ad, Ac and suggest a method to improve CMRR.

Derive the transfer characteristics of dual input differential amplifier showing the linear and limiting regions. Comment on the same.

(i) A square wave peak-to-peak amplitude of 50mV has to be amplified to a peak-to-peak amplitude of 3V, with rise time of 4 μs or less. Can IC741 be used?
(ii) A IC741 Op-Amp whose slew rate is 0.5V/μs is used as an inverting amplifier with a gain of 50.The voltage gain Vs frequency curve of IC741 is flat up to 20 kHz. What maximum peak to peak input signal can be applied without distorting the output? EC8453 Question Bank Linear Integrated Circuits

Explain in detail the A.C analysis of dual input, balanced output differential amplifier or derive the expression for differential gain, common mode gain, CMRR, RI and RO of an emitter coupled differential amplifier.

Illustrate each direct current characteristics of operational amplifier with necessary equations and diagrams.

Subject name Linear Integrated Circuits
Semester 4
Subject Code EC8453
Regulation 2017 regulation

EC8453 Linear Integrated Circuits Question Bank Click Here To Download

EC8453 Syllabus Linear Integrated Circuits

EC8453 Notes Linear Integrated Circuits

EC8453 Important Questions Linear Integrated Circuits