CE8391 Syllabus Construction Materials

CE8391 Syllabus Construction Materials Regulation 2017 Anna University free download. Construction Materials Syllabus CE8391 pdf free download.

UNIT I STONES – BRICKS – CONCRETE BLOCKS CE8391 Syllabus Construction Materials

Stone as building material – Criteria for selection – Tests on stones – Deterioration and Preservation of stone work – Bricks – Classification – Manufacturing of clay bricks – Tests on bricks – Compressive Strength – Water Absorption – Efflorescence – Bricks for special use – Refractory bricks – Concrete blocks – Lightweight concrete blocks.

UNIT II LIME – CEMENT – AGGREGATES – MORTAR CE8391 Syllabus Construction Materials

Lime – Preparation of lime mortar – Cement – Ingredients – Manufacturing process – Types and Grades – Properties of cement and Cement mortar – Hydration – Compressive strength – Tensile strength – Fineness– Soundness and consistency – Setting time – fine aggregates – river sand – crushed stone sand – properties – coarse Aggregates – Crushing strength – Impact strength – Flakiness Index – Elongation Index – Abrasion Resistance – Grading

UNIT III CONCRETE CE8391 Construction Materials Syllabus 

Concrete – Ingredients – Manufacturing Process – Batching plants –mixing – transporting – placing – compaction of concrete –curing and finishing – Ready mix Concrete – Mix specification.

UNIT IV TIMBER AND OTHER MATERIALS CE8391 Syllabus Construction Materials

Timber – Market forms – Industrial timber– Plywood – Veneer – Thermocol – Panels of laminates – Steel – Aluminum and Other Metallic Materials – Composition – Aluminium composite panel – Market forms – Mechanical treatment – Paints – Varnishes – Distempers – Bitumens.

UNIT V MODERN MATERIALS CE8391 Construction Materials Syllabus 

Glass – Ceramics – Sealants for joints – Fibre glass reinforced plastic – Clay products –Refractories – Composite materials – Types – Applications of laminar composites – Fibre textiles– Geomembranes and Geotextiles for earth reinforcement.

CE8391 Syllabus Construction Materials Click here to download

CE8391 Notes Construction Materials

CE8391 Important Questions Construction Materials

CE8391 Question Bank Construction Materials

CE8351 Syllabus Surveying 

CE8351 Syllabus Surveying Regulation 2017 Anna University free download. Surveying Syllabus CE8351 pdf free download.

UNIT I FUNDAMENTALS OF CONVENTIONAL SURVEYING AND LEVELLING CE8351 Syllabus Surveying

Classifications and basic principles of surveying – Equipment and accessories for ranging and chaining – Methods of ranging – Compass – Types of Compass – Basic Principles- Bearing – Types – True Bearing – Magnetic Bearing – Levelling- Principles and theory of Levelling – Datum- – Bench Marks – Temporary and Permanent Adjustments- Methods of Levelling- Booking – Reduction – Sources of errors in Levelling – Curvature and refraction.

UNIT II THEODOLITE AND TACHEOMETRIC SURVEYING CE8351 Syllabus Surveying

Horizontal and vertical angle measurements – Temporary and permanent adjustments – Heights and distances – Tacheometer – Stadia Constants – Analytic Lens -Tangential and Stadia Tacheometry surveying – Contour – Contouring – Characteristics of contours – Methods of contouring – Tacheometric contouring – Contour gradient – Uses of contour plan and map

UNIT III CONTROL SURVEYING AND ADJUSTMENT CE8351 Syllabus Surveying

Horizontal and vertical control – Methods – specifications – triangulation- baseline – satellite stations – reduction to centre- trigonometrical levelling – single and reciprocal observations – traversing – Gale’s table. – Errors Sources- precautions and corrections – classification of errors – true and most probable values – weighed observations – method of equal shifts –principle of least squares – normal equation – correlates- level nets- adjustment of simple triangulation networks.

UNIT IV ADVANCED TOPICS IN SURVEYING CE8351 Syllabus Surveying

Hydrographic Surveying – Tides – MSL – Sounding methods – Three point problem – Strength of fix – astronomical Surveying – Field observations and determination of Azimuth by altitude and hour angle methods –.Astronomical terms and definitions – Motion of sun and stars – Celestial coordinate systems – different time systems – Nautical Almanac – Apparent altitude and corrections – Field observations and determination of time, longitude, latitude and azimuth by altitude and hour angle method

UNIT V MODERN SURVEYING CE8351 Syllabus Surveying

Total Station : Advantages – Fundamental quantities measured – Parts and accessories – working principle – On board calculations – Field procedure – Errors and Good practices in using Total Station GPS Surveying : Different segments – space, control and user segments – satellite configuration – signal structure – Orbit determination and representation – Anti Spoofing and Selective Availability – Task of control segment – Hand Held and Geodetic receivers – data processing – Traversing and triangulation.

CE8351 Syllabus Surveying Click here to download

CE8351 notes Surveying

CE8351 Important Questions Surveying

CE8351 Question Bank Surveying

CE8302 Syllabus FLUID MECHANICS

CE8302 Syllabus FLUID MECHANICS Regulation 2017 Anna University free download. FLUID MECHANICS Syllabus CE8302 pdf free download.

UNIT I FLUID PROPERTIES AND FLUID STATICS CE8302 Syllabus FLUID MECHANICS

Fluid – definition, distinction between solid and fluid – Units and dimensions – Properties of fluids – density,  specific  weight,  specific  volume,  specific  gravity,  viscosity,  compressibility,  vapour pressure, capillarity and surface tension – Fluid statics: concept of fluid static pressure, absolute and gauge pressures – pressure measurements by manometers-forces on planes – centre of pressure – buoyancy and floatation.

UNIT II FLUID KINEMATICS AND DYNAMICS CE8302 Syllabus FLUID MECHANICS

Fluid Kinematics – Classification and types of flow – velocity field and acceleration – continuity equation (one and three dimensional differential forms)- stream line-streak line-path line- stream function – velocity potential function – flow net. Fluid dynamics – equations of motion -Euler’s equation along a streamline – Bernoulli’s equation – applications – venturi meter, orifice meter and Pitot tube- linear momentum equation and its application to pipe bend.

UNIT III DIMENSIONAL ANALYSIS AND MODEL STUDIES CE8302 Syllabus FLUID MECHANICS

Fundamental dimensions – dimensional homogeneity – Rayleigh’s method and Buckingham Pi- theorem – dimensionless parameters – similitudes and model studies – distorted models.

UNIT IV FLOW THROUGH PIPES CE8302 Syllabus FLUID MECHANICS

Reynold’s experiment – laminar flow through circular pipe (Hagen poiseulle’s) – hydraulic and energy gradient – flow through pipes – Darcy – Weisbach’s equation – pipe roughness -friction factor- Moody’s diagram- major and minor losses of flow in pipes – pipes in series and in parallel.

UNIT V  BOUNDARY LAYER CE8302 FLUID MECHANICS Syllabus

Boundary layer – definition- boundary layer on a flat plate – laminar and turbulent boundary layer- displacement, energy and momentum thickness – Momentum integral equation-Boundary layer separation and control – drag on flat plate.

CE8302 Syllabus FLUID MECHANICS Click here to download

CE8302 Notes FLUID MECHANICS

CE8302 Important Questions FLUID MECHANICS

CE8302 Question Bank FLUID MECHANICS

CE8301 Syllabus Strength of Materials 1

CE8301 Syllabus Strength of Materials 1 Regulation 2017 Anna University free download. Strength of Materials 1 Syllabus CE8301 pdf free download.

UNIT I STRESS, STRAIN AND DEFORMATION OF SOLIDS CE8301 Syllabus Strength of Materials 1

Simple Stresses and strains – Elastic constants – Relationship between elastic constants – Stress Strain Diagram – Ultimate Stress – Yield Stress – Deformation of axially loaded member – Composite Bars – Thermal Stresses – State of Stress in two dimensions – Stresses on inclined planes – Principal Stresses and Principal Planes – Maximum shear stress – Mohr’s circle method.

UNIT II TRANSFER OF LOADS AND STRESSES IN BEAMS CE8301 Syllabus Strength of Materials 1

Types of loads, supports, beams – concept of shearing force and bending moment – Relationship between intensity of load, Shear Force and Bending moment – Shear Force and Bending Moment Diagrams for Cantilever, simply supported and overhanging beams with concentrated load, uniformly distributed load, uniformly varying load and concentrated moment. Theory of Simple
Bending – Stress Distribution due to bending moment and shearing force – Flitched Beams – Leaf Springs.

UNIT III DEFLECTION OF BEAMS CE8301 Syllabus Strength of Materials 1

Elastic curve – Governing differential equation – Double integration method – Macaulay’s method – Area moment method – conjugate beam method for computation of slope and deflection of determinant beams.

UNIT IV TORSION CE8301 Syllabus Strength of Materials 1

Theory of Torsion – Stresses and Deformations in Solid and Hollow Circular Shafts – combined bending moment and torsion of shafts – Power transmitted to shaft – Shaft in series and parallel – Closed and Open Coiled helical springs – springs in series and parallel – Design of buffer springs.

UNIT V ANALYSIS OF TRUSSES CE8301 Syllabus Strength of Materials 1

Determinate and indeterminate trusses – Analysis of pin jointed plane determinate trusses by method of joints, method of sections and tension coefficient – Analysis of Space trusses by tension coefficient method.

CE8301 Syllabus Strength of Materials 1 Click here to download

CE8301 Notes Strength of Materials 1 

CE8301 important Questions Strength of Materials 1 

CE8301 Question Bank Strength of Materials 1 

MA8353 Syllabus Transforms and Partial Differential Equations

MA8353 Syllabus Transforms and Partial Differential Equations Regulation 2017 Anna University free download. Transforms and Partial Differential Equations Syllabus MA8353 pdf free download.

UNIT I PARTIAL DIFFERENTIAL EQUATIONS MA8353 Syllabus Transforms and Partial Differential Equations

Formation of partial differential equations – Singular integrals – Solutions of standard types of first order partial differential equations – Lagrange’s linear equation – Linear partial differential equations of second and higher order with constant coefficients of both homogeneous and non-homogeneous types.

UNIT II FOURIER SERIES MA8353 Syllabus Transforms and Partial Differential Equations

Dirichlet’s conditions – General Fourier series – Odd and even functions – Half range sine series – Half range cosine series – Complex form of Fourier series – Parseval’s identity – Harmonic analysis.

UNIT III APPLICATIONS OF PARTIAL DIFFERENTIAL EQUATIONS MA8353 Syllabus Transforms and Partial Differential Equations

Classification of PDE – Method of separation of variables – Fourier Series Solutions of one dimensional wave equation – One dimensional equation of heat conduction – Steady state solution of two dimensional equation of heat conduction.

UNIT IV FOURIER TRANSFORMS MA8353 Transforms and Partial Differential Equations Syllabus

Statement of Fourier integral theorem – Fourier transform pair – Fourier sine and cosine transforms – Properties – Transforms of simple functions – Convolution theorem – Parseval’s identity.

UNIT V Z – TRANSFORMS AND DIFFERENCE EQUATIONS MA8353 Transforms and Partial Differential Equations Syllabus

Z-transforms – Elementary properties – Inverse Z-transform (using partial fraction and residues) – Initial and final value theorems – Convolution theorem – Formation of difference equations – Solution of difference equations using Z – transform.

MA8353 Syllabus Transforms and Partial Differential Equations Click here to download

MA8353 Notes Transforms and Partial Differential Equations

MA8353 Important questions Transforms and Partial Differential Equations

MA8353 Question Bank Transforms and Partial Differential Equations