Categories
Important question

CE8301 Important Questions Strength of Materials 1 Regulation 2017 Anna University

CE8301 Important Questions Strength of Materials 1

CE8301 Important Questions Strength of Materials 1 Regulation 2017 Anna University free download. Strength of Materials 1 Important Questions CE8301 pdf free download.

Sample CE8301 Important Questions Strength of Materials 1:

1. State the assumptions while deriving the general formula for shear stresses.
(May/June 2011)
i. The material is homogenous, isotropic and elastic.
ii. The modulus of elasticity in tension and compression are same and the
shear stress is constant along the beam width. CE8301 Important Questions Strength of Materials 1
2. Define shear stress distribution. (May/June 2013)
` The variation of shear stress along the depth of beam is called shear stress distribution.
3. Mention the different types of beams. (May/June 2009)
i. Cantilever beam,
ii. Simply supported beam, CE8301 Important Questions Strength of Materials 1
iii. Fixed beam,
iv. Continous beam and
v. Over hanging beam
4. Write down the bending moment equation. (May/June 2009)
The bending equation M /I = σ/y =E/R
Where,
M – bending moment
I – moment of inertia of the section,
σ – bending stress at that section,
y – distance from the neutral axis,
E – Young’s modulus of the material,
R – radius of curvature of the beam. CE8301 Important Questions Strength of Materials 1
5. What do you understand by the term point of contraflexure? (Apr/May 2010)
The point where the shear force changes its sign or zero is called as point of contraflexure.At this point the bending moment is maximum. CE8301 Important Questions Strength of Materials 1
6. What is the value of bending moment corresponding to a point having a zero shear
force? (May/June 2010)
The value of bending moment is maximum where the shear force changes it sign or zero. CE8301 Important Questions Strength of Materials 1
7. Mention the types of supports. (Apr/May 2011) Roller support Fixed support Hinged or pinned support
8. Define bending moment in beam. (Nov/Dec 2012)
The bending moment of the beam may be defined as the algebraic sum of the moments of the forces, to the right or left of the section. CE8301 Important Questions Strength of Materials 1

Subject name Strength of Materials 1
Semester 3
Subject Code CE8301
Regulation 2017 regulation

CE8301 Important questions Strength of Materials 1 Click Here To Download

CE8301 Syllabus Strength of Materials 1


CE8301 Notes Strength of Materials 1


CE8301 Question Bank Strength of Materials 1

Leave a Reply

Your email address will not be published. Required fields are marked *