Tag: Notes

CS3351 Digital Principles and Computer Organization Study Materials

Anna University – CS3351 Digital Principles and Computer Organization Regulation 2021 Syllabus, Notes, Important Questions, Question Paper with Answers, Previous Year Question Paper.

UNIT I COMBINATIONAL LOGIC CS3351 Digital Principles and Computer Organization Syllabus

Combinational Circuits – Karnaugh Map – Analysis and Design Procedures – Binary Adder – Subtractor – Decimal Adder – Magnitude Comparator – Decoder – Encoder – Multiplexers – Demultiplexers

UNIT II SYNCHRONOUS SEQUENTIAL LOGIC CS3351 Digital Principles and Computer Organization Notes

Introduction to Sequential Circuits – Flip-Flops – operation and excitation tables, Triggering of FF, Analysis and design of clocked sequential circuits – Design – Moore/Mealy models, state minimization, state assignment, circuit implementation – Registers – Counters.

UNIT III COMPUTER FUNDAMENTALS CS3351 Digital Principles and Computer Organization Important Questions

Functional Units of a Digital Computer: Von Neumann Architecture – Operation and Operands of Computer Hardware Instruction – Instruction Set Architecture (ISA): Memory Location, Address and Operation – Instruction and Instruction Sequencing – Addressing Modes, Encoding of Machine Instruction – Interaction between Assembly and High Level Language.

UNIT IV PROCESSOR CS3351 Digital Principles and Computer Organization Questions Paper

Instruction Execution – Building a Data Path – Designing a Control Unit – Hardwired Control, Microprogrammed Control – Pipelining – Data Hazard – Control Hazards.

UNIT V MEMORY AND I/O CS3351 Digital Principles and Computer Organization Question Bank

Memory Concepts and Hierarchy – Memory Management – Cache Memories: Mapping and Replacement Techniques – Virtual Memory – DMA – I/O – Accessing I/O: Parallel and Serial Interface – Interrupt I/O – Interconnection Standards: USB, SATA

Syllabus	Click Here
Notes	Click Here
Important Questions	Click Here
Previous Year Question Paper	Click Here
Question Bank	Click Here

TEXT BOOKS: CS3351 Digital Principles and Computer Organization DPCO

1. M. Morris Mano, Michael D. Ciletti, “Digital Design : With an Introduction to the Verilog HDL, VHDL, and System Verilog”, Sixth Edition, Pearson Education, 2018.
2. David A. Patterson, John L. Hennessy, “Computer Organization and Design, The Hardware/Software Interface”, Sixth Edition, Morgan Kaufmann/Elsevier, 2020.

REFERENCES: DPCO

1. Carl Hamacher, Zvonko Vranesic, Safwat Zaky, Naraig Manjikian, “Computer Organization and Embedded Systems”, Sixth Edition, Tata McGraw-Hill, 2012.
2. William Stallings, “Computer Organization and Architecture – Designing for Performance”, Tenth Edition, Pearson Education, 2016.
3. M. Morris Mano, “Digital Logic and Computer Design”, Pearson Education, 2016.

Related Links

Anna University Syllabus Regulation 2021

Anna University Regulation 2021 Study Materials

Anna University Results

AU COE Portal

CGPA Calculator For Anna University

Download Padeepz App for Android

MA3354 Discrete Mathematics Study Materials

Anna University – MA3354 Discrete Mathematics Regulation 2021 Syllabus, Notes, Important Questions, Question Paper with Answers, Previous Year Question Paper.

UNIT I LOGIC AND PROOFS MA3354 Discrete Mathematics Syllabus

Propositional logic – Propositional equivalences – Predicates and quantifiers – Nested quantifiers – Rules of inference – Introduction to proofs – Proof methods and strategy.

UNIT II COMBINATORICS MA3354 Discrete Mathematics Notes

Mathematical induction – Strong induction and well ordering – The basics of counting – The pigeonhole principle – Permutations and combinations – Recurrence relations – Solving linear recurrence relations – Generating functions – Inclusion and exclusion principle and its applications.

UNIT III GRAPHS MA3354 Discrete Mathematics Important Questions

Graphs and graph models – Graph terminology and special types of graphs – Matrix representation of graphs and graph isomorphism – Connectivity – Euler and Hamilton paths.

UNIT IV ALGEBRAIC STRUCTURES MA3354 Discrete Mathematics Question Bank

Algebraic systems – Semi groups and monoids – Groups – Subgroups – Homomorphism’s – Normal subgroup and cosets – Lagrange’s theorem – Definitions and examples of Rings and Fields.

UNIT V LATTICES AND BOOLEAN ALGEBRA MA3354 Discrete Mathematics Question Paper

Partial ordering – Posets – Lattices as posets – Properties of lattices – Lattices as algebraic systems – Sub lattices – Direct product and homomorphism – Some special lattices – Boolean algebra – Sub Boolean Algebra – Boolean Homomorphism.

Syllabus	Click Here
Notes	Click Here
Important Questions	Click Here
Previous Year Question Paper	Click Here
Question Bank	Click Here

TEXT BOOKS: MA3354 Discrete Mathematics

1. Rosen. K.H., “Discrete Mathematics and its Applications”, 7th Edition, Tata McGraw Hill Pub. Co. Ltd., New Delhi, Special Indian Edition, 2017.
2. Tremblay. J.P. and Manohar. R, “Discrete Mathematical Structures with Applications to Computer Science”, Tata McGraw Hill Pub. Co. Ltd, New Delhi, 30th Reprint, 2011.

REFERENCES:

1. Grimaldi. R.P. “Discrete and Combinatorial Mathematics: An Applied Introduction”, 5thEdition, Pearson Education Asia, Delhi, 2013.
2. Koshy. T. “Discrete Mathematics with Applications”, Elsevier Publications, 2006.
3. Lipschutz. S. and Mark Lipson., “Discrete Mathematics”, Schaum’s Outlines, Tata McGraw Hill Pub. Co. Ltd., New Delhi, 3rd Edition, 2010.

Related Links

Anna University Syllabus Regulation 2021

Anna University Regulation 2021 Study Materials

Anna University Results

AU COE Portal

CGPA Calculator For Anna University

Download Padeepz App for Android

ME3382 Manufacturing Technology Laboratory

Anna University – ME3382 Manufacturing Technology Laboratory Regulation 2021 Syllabus, Lab Manual, Important Questions, Question Paper with Answers, Previous Year Question Paper.

COURSE OBJECTIVES: ME3382 Manufacturing Technology Laboratory

1 To Selecting appropriate tools, equipment’s and machines to complete a given job.
2 To Performing various welding process using GMAW and fabricating gears using gear making
machines.
3 To Performing various machining process such as rolling, drawing, turning, shaping, drilling, milling
and analysing the defects in the cast and machined components.

LIST OF EXPERIMENTS ME3382 Manufacturing Technology Laboratory

1. Fabricating simple structural shapes using Gas Metal Arc Welding machine.
2. Preparing green sand moulds with cast patterns.
3. Taper Turning and Eccentric Turning on circular parts using lathe machine.
4. Knurling, external and internal thread cutting on circular parts using lathe machine.
5. Shaping – Square and Hexagonal Heads on circular parts using shaper machine.
6. Drilling and Reaming using vertical drilling machine.
7. Milling contours on plates using vertical milling machine.
8. Cutting spur and helical gear using milling machine.
9. Generating gears using gear hobbing machine.
10. Generating gears using gear shaping machine.
11. Grinding components using cylindrical and centerless grinding machine.
12. Grinding components using surface grinding machine.
13. Cutting force calculation using dynamometer in milling machine
14. Cutting force calculation using dynamometer in lathe machine

Syllabus	Click Here
Lab Manual	Click Here
Important Questions	Click Here
Previous Year Question Paper	Click Here
Question Bank	Click Here

OUTCOMES: ME3382 Manufacturing Technology Laboratory

At the end of the course the students would be able to
1. Demonstrate the safety precautions exercised in the mechanical workshop and join two metals
using GMAW.
2. The students able to make the work piece as per given shape and size using machining process
such as rolling, drawing, turning, shaping, drilling and milling.
3. The students become make the gears using gear making machines and analyze the defects in the
cast and machined components

Related Links

Anna University Syllabus Regulation 2021

Anna University Regulation 2021 Study Materials

Anna University Results

CGPA Calculator For Anna University

Download Padeepz App for Android

 

ME3381 Computer Aided Machine Drawing Study Materials

Anna University – ME3381 Computer Aided Machine Drawing Regulation 2021 Syllabus, Notes, Important Questions, Question Paper with Answers, Previous Year Question Paper.

PART I DRAWING STANDARDS & FITS AND TOLERANCES

Code of practice for Engineering Drawing, BIS specifications – Welding symbols, riveted joints, keys,
fasteners – Reference to hand book for the selection of standard components like bolts, nuts, screws, keys
etc. – Limits, Fits – Tolerancing of individual dimensions IS919- Specification of Fits – Preparation of
production drawings and reading of part and assembly drawings, basic principles of Geometric Dimensioning
&Tolerancing.

PART II 2D DRAFTING ME3381 Computer Aided Machine Drawing Syllabus

Drawing, Editing, Dimensioning, Layering, Hatching, Block, Array, Detailing, Detailed Drawing.
1. Bearings – Bush Bearing,
2. Valves – Safety and Non-return Valves.
3. Couplings – Flange, Oldham’s, Muff, Gear couplings.
4. Joints – Universal, Knuckle, Gib& Cotter, Strap, Sleeve &Cotter joints.
5. Engine parts – Piston, Connecting Rod, Crosshead (vertical and horizontal), Stuffing box, multi-plate clutch.
6. Machine Components – Screw Jack, Machine Vice, LatheTail Stock, Lathe Chuck, Plummer Block,Vane
and Gear pumps.
Total: 20% of classes for theory classes and 80% of classes for practice
Note: 25% of assembly drawings must be done manually and remaining 75% of assembly drawings must be
done by using any CAD software. The above tasks can be performed manually and using standard
commercial 2D CAD software.

OUTCOMES: ME3381 Computer Aided Machine Drawing Lab Manual

At the end of the course the students would be able to
1. Prepare standard drawing layout for modelled assemblies with BoM.
2. Model orthogonal views of machine components.
3. Prepare standard drawing layout for modelled parts

Syllabus	Click Here
Lab Manual	Click Here
Important Questions	Click Here
Previous Year Question Paper	Click Here
Question Bank	Click Here

TEXT BOOKS: ME3381 Computer Aided Machine Drawing Lab Manual

1. Gopalakrishna K.R., “Machine Drawing”, 17th Edition, Subhas Stores Books Corner, Bangalore,2003.
2. N. D. Bhatt and V.M. Panchal, “Machine Drawing”, 51st Edition, Charator Publishers,2022.

REFERENCES: ME3381 Computer Aided Machine Drawing Lab Manual

1. K. L Narayana, P.Kannaiah, K.Venkata Reddy, Machine Drawing , 15 Edition , New Age International
Publication
2. Goutam Pohit and Goutam Ghosh, “Machine Drawing with AutoCAD”, 1st Edition,Pearson Education,
2004
3. Junnarkar, N.D., “Machine Drawing”, 1st Edition, Pearson Education, 2004
4. N. Siddeshwar, P. Kanniah, V.V.S. Sastri,” Machine Drawing” , published by Tata McGrawHill,2006
5. S. Trymbaka Murthy, “A Text Book of Computer Aided Machine Drawing”, CBS Publishers, New Delhi,
2007

Related Links

Anna University Syllabus Regulation 2021

Anna University Regulation 2021 Study Materials

Anna University Results

CGPA Calculator For Anna University

Download Padeepz App for Android

 

ME3393 Manufacturing Processes Study Materials

Anna University – ME3393 Manufacturing Processes Regulation 2021 Syllabus, Notes, Important Questions, Question Paper with Answers, Previous Year Question Paper.

UNIT – I METAL CASTING PROCESSES ME3393 Manufacturing Processes Syllabus

Sand Casting – Sand Mould – Type of patterns – Pattern Materials – Pattern allowances – Molding sand
Properties and testing – Cores –Types and applications – Molding machines – Types and applications–
Melting furnaces – Principle of special casting processes- Shell, investment – Ceramic mould – Pressure die
casting – low pressure, gravity- Tilt pouring, high pressure die casting- Centrifugal Casting – CO2 casting –-
Defects in Sand casting process-remedies

UNIT II METAL JOINING PROCESSES ME3393 Manufacturing Processes Notes

Fusion welding processes – Oxy fuel welding – Filler and Flux materials-–Arc welding, Electrodes, Coating
and specifications – Gas Tungsten arc welding –Gas metal arc welding – Submerged arc welding – Electro
slag welding– Plasma arc welding –– Resistance welding Processes -Electron beam welding –Laser beam
Welding Friction welding – Friction stir welding – Diffusion welding – Thermit Welding, Weld defects –
inspection &remedies – Brazing – soldering – Adhesive bonding.

UNIT III BULK DEFORMATION PROCESSES ME3393 Manufacturing Processes Important Questions

Hot working and cold working of metals – Forging processes – Open, impression and closed die forging –
cold forging- Characteristics of the processes – Typical forging operations – rolling of metals – Types of
Rolling – Flat strip rolling – shape rolling operations – Defects in rolled parts – Principle of rod and wire
drawing – Tube drawing – Principles of Extrusion – Types – Hot and Cold extrusion. Introduction to shaping
operations.

UNIT IV SHEET METAL PROCESSES ME3393 Manufacturing Processes Question Bank

Sheet metal characteristics – Typical shearing, bending and drawing operations – Stretch forming operations
– Formability of sheet metal – Test methods –special forming processes -Working principle and applications
– Hydro forming – Rubber pad forming – Metal spinning – Introduction of Explosive forming, magnetic pulse
forming, peen forming, Super plastic forming – Micro forming – Incremental forming.

UNIT V MANUFACTURE OF PLASTIC COMPONENTS ME3393 Manufacturing Processes Question Paper

Types and characteristics of plastics – Molding of thermoplastics & Thermosetting polymers– working
principles and typical applications – injection molding – Plunger and screw machines – Compression molding,
Transfer Molding – Typical industrial applications – introduction to blow molding – Rotational molding – Film
blowing – Extrusion – Thermoforming – Bonding of Thermoplastics- duff moulding.

Syllabus	Click Here
Notes	Click Here
Important Questions	Click Here
Previous Year Question Paper	Click Here
Question Bank	Click Here

TEXT BOOKS: ME3393 Manufacturing Processes

1. Kalpakjian. S, “Manufacturing Engineering and Technology”, Pearson Education India,4th Edition, 2013
2. P.N.Rao Manufacturing Technology Volume 1 Mc Grawhill Education 5th edition,2018.

REFERENCES: ME3393 Manufacturing Processes

1. Roy. A. Lindberg, Processes and materials of manufacture, PHI / Pearson education, 2006.
2. S. Gowri P. Hariharan, A.Suresh Babu, Manufacturing Technology I, Pearson Education, 2008.
3. Paul Degarma E, Black J.T and Ronald A. Kosher, Eligth Edition, Materials and Processes, in
Manufacturing, Eight Edition, Prentice – Hall of India, 1997.
4. Hajra Chouldhary S.K and Hajra Choudhury. AK., Elements of workshop Technology, volume I and II,
Media promoters and Publishers Private Limited, Mumbai, 1997
5. Sharma, P.C., A Text book of production Technology, S.Chand and Co. Ltd., 2004

Related Links

Anna University Syllabus Regulation 2021

Anna University Regulation 2021 Study Materials

Anna University Results

CGPA Calculator For Anna University

Download Padeepz App for Android

ME3392 Engineering Materials and Metallurgy Study Materials

Anna University – ME3392 Engineering Materials and Metallurgy Regulation 2021 Syllabus, Notes, Important Questions, Question Paper with Answers, Previous Year Question Paper.

UNIT I CONSTITUTION OF ALLOYS AND PHASE DIAGRAMS ME3392 Engineering Materials and Metallurgy Syllabus

Constitution of alloys – Solid solutions, substitutional and interstitial – phase diagrams, Isomorphous,
eutectic, eutectoid, peritectic, and peritectoid reactions, Iron – Iron carbide equilibrium diagram.
Classification of steel and cast-Iron microstructure, properties and application.

UNIT II HEAT TREATMENT ME3392 Engineering Materials and Metallurgy Notes

Definition – Full annealing, stress relief, recrystallisation and spheroidising –normalizing, hardening and
tempering of steel. Isothermal transformation diagrams – cooling curves superimposed on I.T. diagram
– continuous cooling Transformation (CCT) diagram – Austempering, Martempering – Hardenability,
Jominy end quench test -case hardening, carburizing, Nitriding, cyaniding, carbonitriding – Flame and
Induction hardening – Vacuum and Plasma hardening – Thermo-mechanical treatments- elementary
ideas on sintering.

UNIT III FERROUS AND NON-FERROUS METALS ME3392 Engineering Materials and Metallurgy Important Questions

Effect of alloying additions on steel (Mn, Si, Cr, Mo, Ni, V,Ti& W) – stainless and tool steels – HSLA –
Maraging steels – Grey, white, malleable, spheroidal – alloy cast irons, Copper and its alloys – Brass,
Bronze and Cupronickel – Aluminium and its alloys; Al-Cu – precipitation strengthening treatment –
Titanium alloys, Mg-alloys, Ni-based super alloys – shape memory alloys- Properties and Applicationsoverview
of materials standards

UNIT IV NON-METALLIC MATERIALS ME3392 Engineering Materials and Metallurgy Question Bank

Polymers – types of polymers, commodity and engineering polymers – Properties and applications of
PE, PP, PS, PVC, PMMA, PET, PC, PA, ABS, PAI, PPO, PPS, PEEK, PTFE, Thermoset polymers –
Urea and Phenol formaldehydes –Nylon, Engineering Ceramics – Properties and applications of Al2O3,
SiC, Si3N4, PSZ and SIALON – intermetallics- Composites- Matrix and reinforcement Materialsapplications
of Composites – Nano composites.

UNIT V MECHANICAL PROPERTIES AND DEFORMATION MECHANISMS ME3392 Engineering Materials and Metallurgy Question Paper

Mechanisms of plastic deformation, slip and twinning – Types of fracture – fracture mechanics- Griffith’s
theory- Testing of materials under tension, compression and shear loads – Hardness tests (Brinell,
Vickers and Rockwell), Micro and nano-hardness tests, Impact test lzod and charpy, fatigue and creep
failure mechanisms.

Syllabus	Click Here
Notes	Click Here
Important Questions	Click Here
Previous Year Question Paper	Click Here
Question Bank	Click Here

TEXT BOOKS: ME3392 Engineering Materials and Metallurgy Question Paper

1. Kenneth G.Budinski and Michael K. Budinski, “Engineering Materials”, Prentice Hall of India
Private Limited, 9th edition ,2018.
2. Sydney H.Avner, “Introduction to Physical Metallurgy”, McGraw Hill Book Company, 1994

REFERENCES: ME3392 Engineering Materials and Metallurgy Question Paper

1. A. Alavudeen, N. Venkateshwaran, and J. T.WinowlinJappes, A Textbook of Engineering Materials
and Metallurgy, Laxmi Publications, 2006.
2. Amandeep Singh Wadhwa, andHarvinder Singh Dhaliwal, A Textbook of Engineering Material and
Metallurgy, University Sciences Press, 2008.

3. G.S. Upadhyay and Anish Upadhyay, “Materials Science and Engineering”, Viva Books Pvt.Ltd, New
Delhi, 2020.
4. Raghavan.V, “Materials Science and Engineering”, Prentice Hall of India Pvt.Ltd. 6th edition, 2019.
5. Williams D Callister, “Material Science and Engineering” Wiley India Pvt Ltd, 2nd edition Re print
2019.

Related Links

Anna University Syllabus Regulation 2021

Anna University Regulation 2021 Study Materials

Anna University Results

CGPA Calculator For Anna University

Download Padeepz App for Android

CE3391 Fluid Mechanics and Machinery Study Materials

Anna University – CE3391 Fluid Mechanics and Machinery Regulation 2021 Syllabus, Notes, Important Questions, Question Paper with Answers, Previous Year Question Paper.

UNIT I FLUID PROPERTIES AND FLOW CHARACTERISTICS CE3391 Fluid Mechanics and Machinery Syllabus

Properties of fluids – Fluid statics – Pressure Measurements – Buoyancy and floatation – Flow
characteristics – Eulerian and Lagrangian approach – Concept of control volume and system – Reynold’s
transportation theorem – Continuity equation, energy equation and momentum equation – Applications.

UNIT II FLOW THROUGH PIPES AND BOUNDARY LAYER CE3391 Fluid Mechanics and Machinery Notes

Reynold’s Experiment – Laminar flow through circular conduits – Darcy Weisbach equation – friction
factor – Moody diagram – Major and minor losses – Hydraulic and energy gradient lines – Pipes in series
and parallel – Boundary layer concepts – Types of boundary layer thickness.

UNIT III DIMENSIONAL ANALYSIS AND MODEL STUDIES CE3391 Fluid Mechanics and Machinery Important Questions

Fundamental dimensions – Dimensional homogeneity – Rayleigh’s method and Buckingham Pi theorem
– Dimensionless parameters – Similitude and model studies – Distorted and undistorted models.

UNIT IV TURBINES CE3391 Fluid Mechanics and Machinery Question Bank

Impact of jets – Velocity triangles – Theory of rotodynamic machines – Classification of turbines -Working
principles – Pelton wheel – Modern Francis turbine – Kaplan turbine – Work done – Efficiencies – Draft
tube – Specific speed – Performance curves for turbines – Governing of turbines.

UNIT V PUMPS CE3391 Fluid Mechanics and Machinery Question Paper

Classification of pumps – Centrifugal pumps – Working principle – Heads and efficiencies– Velocity
triangles – Work done by the impeller – Performance curves – Reciprocating pump working principle –
Indicator diagram and it’s variations – Work saved by fitting air vessels – Rotary pumps.

Syllabus	Click Here
Notes	Click Here
Important Questions	Click Here
Previous Year Question Paper	Click Here
Question Bank	Click Here

TEXT BOOKS: CE3391 Fluid Mechanics and Machinery FMM

1. Modi P.N. and Seth, S.M. Hydraulics and Fluid Mechanics, Standard Book House, New Delhi,
22nd edition (2019)
2. Jain A. K. Fluid Mechanics including Hydraulic Machines, Khanna Publishers, New
Delhi, 2014.
3. Kumar K. L., Engineering Fluid Mechanics, Eurasia Publishing House(p) Ltd. New Delhi, 2016.

REFERENCES: CE3391 Fluid Mechanics and Machinery FMM

1. Fox W.R. and McDonald A.T., Introduction to Fluid Mechanics John-Wiley and Sons, Singapore,
2011.
2. Pani B S, Fluid Mechanics: A Concise Introduction, Prentice Hall of India Private Ltd, 2016.
3. Cengel Y A and Cimbala J M, Fluid Mechanics, McGraw Hill Education Pvt. Ltd., 2014.
4. S K Som; Gautam Biswas and S Chakraborty, Introduction to Fluid Mechanics and Fluid Machines,
Tata McGraw Hill Education Pvt. Ltd., 2012.
5. Streeter, V. L. and Wylie E. B., Fluid Mechanics, McGraw Hill Publishing Co., 2010.

Related Links

Anna University Syllabus Regulation 2021

Anna University Regulation 2021 Study Materials

Anna University Results

CGPA Calculator For Anna University

Download Padeepz App for Android

ME3391 Engineering Thermodynamics Study Materials

Anna University – ME3391 Engineering Thermodynamics Regulation 2021 Syllabus, Notes, Important Questions, Question Paper with Answers, Previous Year Question Paper.

UNIT I BASICS, ZEROTH AND FIRST LAW ME3391 Engineering Thermodynamics

Review of Basics – Thermodynamic systems, Properties and processes Thermodynamic Equilibrium –
Displacement work – P-V diagram. Thermal equilibrium – Zeroth law – Concept of temperature and
Temperature Scales. First law – application to closed and open systems – steady and unsteady flow
processes.

UNIT II SECOND LAW AND ENTROPY ME3391 Engineering Thermodynamics

Heat Engine – Refrigerator – Heat pump. Statements of second law and their equivalence & corollaries. Carnot
cycle – Reversed Carnot cycle – Performance – Clausius inequality. Concept of entropy – T-s diagram – Tds
Equations – Entropy change for a pure substance.

UNIT III AVAILABILITY AND APPLICATIONS OF II LAW ME3391 Engineering Thermodynamics

Ideal gases undergoing different processes – principle of increase in entropy. Applications of II Law. Highand
low-grade energy. Availability and Irreversibility for open and closed system processes – I and II law
Efficiency

UNIT IV PROPERTIES OF PURE SUBSTANCES ME3391 Engineering Thermodynamics

Steam – formation and its thermodynamic properties – p-v, p-T, T-v, T-s, h-s diagrams. PVT surface.
Determination of dryness fraction. Calculation of work done and heat transfer in non-flow and flow processes
using Steam Table and Mollier Chart.

UNIT V GAS MIXTURES AND THERMODYNAMIC RELATIONS ME3391 Engineering Thermodynamics

Properties of Ideal gas, real gas – comparison. Equations of state for ideal and real gases. vander Waal’s
relation – Reduced properties – Compressibility factor – Principle of Corresponding states – Generalized
Compressibility Chart. Maxwell relations – TdS Equations – heat capacities relations – Energy equation, Joule-
Thomson experiment – Clausius-Clapeyron equation.

Syllabus	Click Here
Notes	Click Here
Important Questions	Click Here
Previous Year Question Paper	Click Here
Question Bank	Click Here

TEXTBOOKS: ME3391 Engineering Thermodynamics

1. Nag.P.K., “Engineering Thermodynamics”, 6th Edition, Tata McGraw Hill (2017), New Delhi.
2. Natarajan, E., “Engineering Thermodynamics: Fundamentals and Applications”, 2nd Edition (2014),
Anuragam Publications, Chennai.

REFERENCES: ME3391 Engineering Thermodynamics

1. Cengel, Y and M. Boles, Thermodynamics – An Engineering Approach, Tata McGraw Hill,9th Edition,
2019.
2. Chattopadhyay, P, “Engineering Thermodynamics”, 2nd Edition Oxford University Press, 2016.
3. Rathakrishnan, E., “Fundamentals of Engineering Thermodynamics”, 2nd Edition, Prentice Hall of India
Pvt. Ltd, 2006.
4. Claus Borgnakke and Richard E. Sonntag, “Fundamentals of Thermodynamics”, 10th Edition, Wiley
Eastern, 2019.
5. Venkatesh. A, “Basic Engineering Thermodynamics”, Universities Press (India) Limited, 2007

Related Links

Anna University Syllabus Regulation 2021

Anna University Regulation 2021 Study Materials

Anna University Results

CGPA Calculator For Anna University

Download Padeepz App for Android

CE3311 Water and Wastewater Analysis Laboratory

Anna University – CE3311 Water and Wastewater Analysis Laboratory Regulation 2021 Syllabus, Lab Manual, Important Questions, Question Paper with Answers, Previous Year Question Paper.

OBJECTIVES:

 This subject includes the list of experiments to be conducted for characterization of
water and municipal sewage. At the end of the course, the student is expected to be
aware of the procedure for quantifying quality parameters for water and sewage.

LIST OF EXPERIMENTS: ANALYSIS OF WATER SAMPLE CE3311 Water and Wastewater Analysis Laboratory

1. Sampling and preservation methods for water and wastewater (Demonstration only)
2. Measurement of Electrical conductivity and turbidity
3. Determination of fluoride in water by spectrophotometric method /ISE
4. Determination of iron in water (Demo)
5. Determination of Sulphate in water
6. Determination of Optimum Coagulant Dosage by Jar test apparatus
7. Determination of available Chlorine in Bleaching powder and residual chlorine in water

ANALYSIS OF WASTEWATER SAMPLE

8. Estimation of suspended, volatile and fixed solids
9. Determination of Sludge Volume Index in waste water
10. Determination of Dissolved Oxygen
11. Estimation of B.O.D.

12. Estimation of C.O.D.
13. Determination of TKN and Ammonia Nitrogen in wastewater
14. Determination of total and faecal coliform (Demonstration only)

OUTCOMES: CE3311 Water and Wastewater Analysis Laboratory

On completion of the course, the student is expected to
CO1Calibrate and standardize the equipment
CO2Collect proper sample for analysis
CO3To know the sample preservation methods
CO4To perform field oriented testing of water, wastewater
CO5To perform coliform analysis

Syllabus	Click Here
Lab Manual	Click Here
Important Questions	Click Here

REFERENCES: CE3311 Water and Wastewater Analysis Laboratory

1. APHA, “Standard Methods for the Examination of Water and Waste water”, 22nd Ed.
Washington, 2012.
2. “Laboratory Manual for the Examination of water, wastewater soil Rump”, H.H. and
Krist,H. – Second Edition, VCH, Germany, 3rd Edition, 1999.
3. “Methods of air sampling & analysis”,James P.Lodge Jr(Editor) 3rd Edition, Lewis
publishers,Inc,USA,1989.

Related Links

Anna University Syllabus Regulation 2021

Anna University Regulation 2021 Study Materials

Anna University Results

CGPA Calculator For Anna University

Download Padeepz App for Android

CE3361 Surveying and Levelling Laboratory

Anna University – CE3361 Surveying and Levelling Laboratory Regulation 2021 Syllabus, Lab Manual, Important Questions, Question Paper with Answers, Previous Year Question Paper.

OBJECTIVES:

 At the end of the course the student will possess knowledge about survey field techniques

LIST OF EXPERIMENTS: CE3361 Surveying and Levelling Laboratory

Chain Survey Lab Manual

1. Study of chains and its accessories, Aligning, Ranging, Chaining and Marking Perpendicular
offset
2. Setting out works – Foundation marking using tapes single Room and Double Room
Compass Survey
3. Compass Traversing – Measuring Bearings & arriving included angles

Levelling – Study of levels and levelling staff

4. Fly levelling using Dumpy level &Tilting level
5. Check levelling

Theodolite – Study of Theodolite CE3361 Surveying and Levelling Laboratory

6. Measurements of horizontal angles by reiteration and repetition and vertical angles
7. Determination of elevation of an object using single plane method when base is Accessible/inaccessible.

Tacheometry – Tangential system – Stadia system

8. Determination of Tacheometric Constants
9. Heights and distances by stadia Tacheometry
10. Heights and distances by Tangential Tacheometry

Total Station – Study of Total Station, Measuring Horizontal and vertical angles

11. Traverse using Total station and Area of Traverse
12. Determination of distance and difference in elevation between two inaccessible points
using Total station

COURSE OUTCOMES CE3361 Surveying and Levelling Laboratory 

On completion of the course, the student is expected to
CO1 Impart knowledge on the usage of basic surveying instruments like chain/tape, compass
and levelling instruments
CO2 Able to use levelling instrument for surveying operations
CO3 Able to use theodolite for various surveying operations
CO4 Able to carry out necessary surveys for social infrastructures
CO5 Able to prepare planimetric maps

Syllabus	Click Here
Lab Manual	Click Here
Important Questions	Click Here

REFERENCES: CE3361 Surveying and Levelling Laboratory Lab Manual

1. T. P. Kanetkarand S. V. Kulkarni, Surveying and Levelling, Parts 1 & 2, Pune Vidyarthi Griha
Prakashan, Pune, 24th Reprint, 2015.
2. Dr. B. C. Punmia, Ashok K. Jainand Arun K Jain, Surveying Vol. I & II, Lakshmi Publications
Pvt Ltd, New Delhi, 17th Edition, 2016.
3. James M. Anderson and Edward M. Mikhail, Surveying, Theory and Practice, Seventh
Edition, McGraw Hill 2001
4. Bannisterand S. Raymond, Surveying, Seventh Edition, Longman 2004 a. David Clark,
Plane and Geodetic Surveying for Engineers, Volume I, Constable and Company Ltd,
London, CBS, 6th Edition, 2004.
5. David Clark and James Clendinning, Plane and Geodetic Surveying for Engineers, VolumeII,
Constable and Company Ltd, London, CBS, 6th Edition, 2004.
6. S. K. Roy, Fundamentals of Surveying, Second Edition, Prentice ‘Hall of India 2004
7. K. R. Arora, Surveying Vol. I & II, Standard Book house, Eleventh Edition, 2013.

Related Links

Anna University Syllabus Regulation 2021

Anna University Regulation 2021 Study Materials

Anna University Results

CGPA Calculator For Anna University

Download Padeepz App for Android