Tag: Important Questions

Anna University Regulation 2021 Study Materials

Tags Important Questions, Notes, Question Paper, Syllabus

Important question Notes question bank Question Paper R-2021 Syllabus

EE3591 Power Electronics [PDF]

Post author By Mr. Padeepz
Post date June 3, 2023
No Comments on EE3591 Power Electronics [PDF]

EE3591 Power Electronics Study Materials

Anna University – EE3591 Power Electronics Regulation 2021 Syllabus , Notes , Important Questions, Question Paper with Answers Previous Year Question Paper.

UNIT I SWITCHING POWER SUPPLIES EE3591 Power Electronics Syllabus

MOSFET dynamic behavior – driver and snubber circuits – low power high switching frequency
switching Power supplies, buck, boost, buck-boost converters – Isolated topologies – resonant
converters – switching loss calculations and thermal design.

UNIT II INVERTERS EE3591 Power Electronics Notes

IGBT: Static and dynamic behavior – single phase half bridge and full bridge inverters – VSI :(1phase
and three phase inverters square wave operation) – Voltage control of inverters single, multi pulse,
sinusoidal, space vector modulation techniques– various harmonic elimination techniques-CSI

UNIT III UNCONTROLLED RECTIFIERS EE3591 Power Electronics Important Questions

Power Diode – half wave rectifier – mid-point secondary transformer based full wave rectifier – bridge
rectifier – voltage doubler circuit – distortion factor – capacitor filter for low power rectifiers – LC filters
– Concern for power quality – three phase diode bridge.

UNIT IV CONTROLLED RECTIFIERS EE3591 Power Electronics Question Bank

SCR-Two transistor analogy based turn- ON – turn ON losses – thermal protection – controlled
converters (1 pulse, 2 pulse, 3 pulse, 6 pulse) – displacement factor – ripple and harmonic factor –
power factor mitigation, performance parameters – effect of source inductance – inverter angle limit.

UNIT V AC PHASE CONTROLLERS EE3591 Power Electronics Question Paper

TRIAC triggering concept with positive and negative gate pulse triggering, TRIAC based phase
controllers – various configurations for SCR based single and three phase controllers.

Syllabus	Click Here
Notes	Click Here
Important Questions	Click Here
Previous Year Question Paper	Click Here
Question Bank	Click Here

TEXT BOOKS EE3591 Power Electronics Notes

1. Ned Mohan, T.M.Undeland, W.P.Robbins, ”Power Electronics: Converters, applications and
design”, John Wiley and Sons, 3rd Edition (reprint), 2009
2. Rashid M.H., Power Electronics Circuits, Devices and Applications, Prentice Hall India, 3rd
Edition, New Delhi, 2004.

REFERENCES EE3591 Power Electronics Important Questions

1. Cyril. W.Lander, Power Electronics, McGraw Hill International, Third Edition, 1993.
2. P.S.Bimbhra, Power Electronics, Khanna Publishers, Third Edition 2003
3. Philip T.Krein, Elements of Power Electronics, Oxford University Press, 2013.
4. P.C.Sen, Power Electronics, Tata McGraw-Hill, 30th reprint, 2008.

Anna University Regulation 2021 Study Materials

Tags Important Questions, Notes, Question Paper, Syllabus

Important question Notes question bank Question Paper R-2021 Syllabus

EE3501 Power System Analysis [PDF]

Post author By Mr. Padeepz
Post date May 29, 2023
No Comments on EE3501 Power System Analysis [PDF]

EE3501 Power System Analysis Study Materials

Anna University – EE3501 Power System Analysis Regulation 2021 Syllabus , Notes , Important Questions, Question Paper with Answers Previous Year Question Paper.

UNIT I POWER SYSTEM EE3501 Power System Analysis Syllabus

Need for system planning and operational studies – Power scenario in India – Power system
components, Representation – Single line diagram – per unit quantities – p.u. impedance
diagram – p.u. reactance diagram, Network graph Theory – Bus incidence matrices, Primitive
parameters, Formation of bus admittance matrix – Direct inspection method – Singular
Transformation method.

UNIT II POWER FLOW ANALYSIS EE3501 Power System Analysis Notes

Bus classification – Formulation of Power Flow problem in polar coordinates – Power flow
solution using Gauss Seidel method – Handling of Voltage controlled buses – Power Flow
Solution by Newton Raphson method – Flow charts – Comparison of methods.

UNIT III SYMMETRICAL FAULT ANALYSIS EE3501 Power System Analysis Important Questions

Assumptions in short circuit analysis – Symmetrical short circuit analysis using Thevenin’s
theorem – Bus Impedance matrix building algorithm (without mutual coupling) – Symmetrical
fault analysis through bus impedance matrix – Post fault bus voltages – Fault level – Current
limiting reactors.

UNIT IV UNSYMMETRICAL FAULT ANALYSIS EE3501 Power System Analysis Question Bank

Symmetrical components – Sequence impedances – Sequence networks – Analysis of
unsymmetrical faults at generator terminals: LG, LL and LLG – unsymmetrical fault occurring at
any point in a power system.

UNIT V STABILITY ANALYSIS EE3501 Power System Analysis Question Paper

Classification of power system stability – Rotor angle stability – Power-Angle equation – Steady
state stability – Swing equation – Solution of swing equation by step by step method – Swing
curve, Equal area criterion – Critical clearing angle and time, Multi-machine stability analysis –
modified Euler method.

Syllabus	Click Here
Notes	Click Here
Important Questions	Click Here
Previous Year Question Paper	Click Here
Question Bank	Click Here

TEXT BOOKS: EE3501 Power System Analysis Notes

1. John J. Grainger, William D. Stevenson, Jr, ‘Power System Analysis’, Mc Graw Hill
Education (India) Private Limited, New Delhi, 2017.
2. Kothari D.P. and Nagrath I.J., ‘Power System Engineering’, Tata McGraw-Hill
Education, 3rd edition 2019.
3. Hadi Saadat, ‘Power System Analysis’, Tata McGraw Hill Education Pvt. Ltd., New
Delhi, 21st reprint, 2010.

REFERENCES EE3501 Power System Analysis Important Questions

1. Pai M A, ‘Computer Techniques in Power System Analysis’, Tata Mc Graw-Hill
Publishing Company Ltd., New Delhi, Second Edition, 2007.
2. J. Duncan Glover, Mulukutla S.Sarma, Thomas J. Overbye, ‘Power System Analysis &
Design’, Cengage Learning, Fifth Edition, 2012.
3. P. Venkatesh, B. V. Manikandan, A. Srinivasan, S. Charles Raja, “Electrical Power
Systems: Analysis, Security and Deregulation” Prentice Hall India (PHI), second edition
– 2017
4. Gupta B.R., ‘Power System – Analysis and Design’, S. Chand Publishing, Reissue
edition 2005.
5. Kundur P., ‘Power System Stability and Control’, Tata McGraw Hill Education Pvt. Ltd.,
New Delhi, 2013

Anna University Regulation 2021 Study Materials

Tags Important Questions, Notes, Question Paper, Syllabus

Important question Notes question bank Question Paper R-2021 Syllabus

ME3592 Metrology and Measurements [PDF]

Post author By Mr. Padeepz
Post date May 28, 2023
No Comments on ME3592 Metrology and Measurements [PDF]

ME3592 Metrology and Measurements Study Materials

Anna University – ME3592 Metrology and Measurements Regulation 2021 Syllabus , Notes , Important Questions, Question Paper with Answers Previous Year Question Paper.

UNIT – I BASICS OF METROLOGY ME3592 Metrology and Measurements Syllabus

Measurement – Need, Process, Role in quality control; Factors affecting measurement – SWIPE; Errors
in Measurements – Types – Control – Measurement uncertainty – Types, Estimation, Problems on
Estimation of Uncertainty, Statistical analysis of measurement data, Measurement system analysis,
Calibration of measuring instruments, Principle of air gauging- ISO standards.

UNIT – II MEASUREMENT OF LINEAR, ANGULAR DIMENSIONS, ASSEMBLY AND TRANSMISSION ELEMENTS ME3592 Metrology and Measurements Notes

Linear Measuring Instruments – Vernier caliper, Micrometer, Vernier height gauge, Depth Micrometer,
Bore gauge, Telescoping gauge; Gauge blocks – Use and precautions, Comparators – Working and
advantages; Opto-mechanical measurements using measuring microscope and Profile projector – Angular
measuring instruments – Bevel protractor, Clinometer, Angle gauges, Precision level, Sine bar,
Autocollimator, Angle dekkor, Alignment telescope. Measurement of Screw threads – Single element
measurements – Pitch Diameter, Lead, Pitch. Measurement of Gears – purpose – Analytical
measurement – Runout, Pitch variation, Tooth profile, Tooth thickness, Lead – Functional checking –
Rolling gear test.

UNIT – III TOLERANCE ANALYSIS ME3592 Metrology and Measurements Important Questions

Tolerancing– Interchangeability, Selective assembly, Tolerance representation, Terminology, Limits and
Fits, Problems (using tables IS919); Design of Limit gauges, Problems. Tolerance analysis in
manufacturing, Process capability, tolerance stackup, tolerance charting.

UNIT – IV METROLOGY OF SURFACES ME3592 Metrology and Measurements Question Bank

Fundamentals of GD & T- Conventional vs Geometric tolerance, Datums, Inspection of geometric
deviations like straightness, flatness, roundness deviations; Simple problems – Measurement of Surface
finish – Functionality of surfaces, Parameters, Comparative, Stylus based and Optical Measurement
techniques, Filters, Introduction to 3D surface metrology- Parameters.

UNIT – V ADVANCES IN METROLOGY ME3592 Metrology and Measurements Question Paper

Lasers in metrology – Advantages of lasers – Laser scan micrometers; Laser interferometers –
Applications – Straightness, Alignment; Ball bar tests, Computer Aided Metrology – Basic concept of CMM
– Types of CMM – Constructional features – Probes – Accessories – Software – Applications – Multisensor CMMs.
Machine Vision – Basic concepts of Machine Vision System – Elements – Applications – On-line and inprocess monitoring in production – Computed tomography – White light Scanners.

Syllabus	Click Here
Notes	Click Here
Important Questions	Click Here
Previous Year Question Paper	Click Here
Question Bank	Click Here

TEXT BOOKS: ME3592 Metrology and Measurements Notes

1. Dotson Connie, “Dimensional Metrology”, Cengage Learning, First edition, 2012.
2. Mark Curtis, Francis T. Farago, “Handbook of Dimensional Measurement”, Industrial Press, Fifth
edition, 2013.

REFERENCES: ME3592 Metrology and Measurements Important Questions

1. AmmarGrous, J “Applied Metrology for Manufacturing Engineering”, Wiley-ISTE, 2011.
2. Galyer, J.F.W. Charles Reginald Shotbolt, “Metrology for Engineers”, Cengage Learning EMEA; 5th
revised edition, 1990.
3. National Physical LaboratoryGuideNo. 40, No. 41, No. 42, No. 43, No. 80, No. 118, No. 130, No. 131.
http://www.npl.co.uk.
4. Raghavendra N.V. and Krishnamurthy. L., Engineering Metrology and Measurements, Oxford
University Press, 2013.
5. Venkateshan, S. P., “Mechanical Measurements”, Second edition, John Wiley &Sons, 2015.

Anna University Regulation 2021 Study Materials

Tags Important Questions, Notes, Question Paper, Syllabus

Important question Notes question bank Question Paper R-2021 Syllabus

ME3591 Design of Machine Elements [PDF]

Post author By Mr. Padeepz
Post date May 28, 2023
No Comments on ME3591 Design of Machine Elements [PDF]

ME3591 Design of Machine Elements Study Materials

Anna University – ME3591 Design of Machine Elements Regulation 2021 Syllabus , Notes , Important Questions, Question Paper with Answers Previous Year Question Paper.

UNIT – I FUNDAMENTAL CONCEPTS IN DESIGN ME3591 Design of Machine Elements Syllabus

Introduction to the design process – factors influencing machine design, selection of materials based on
mechanical properties – Preferred numbers- Direct, Bending and torsional loading- Modes of failure – Factor
of safety – Combined loads – Principal stresses – Eccentric loading – curved beams – crane hook and ‘C’
frame- theories of failure – Design based on strength and stiffness – stress concentration – Fluctuating
stresses – Endurance limit –Design for finite and infinite life under variable loading – Exposure to standards.

UNIT – II DESIGN OF SHAFTS AND COUPLINGS ME3591 Design of Machine Elements Notes

Shafts and Axles – Design of solid and hollow shafts based on strength, rigidity and critical speed – Keys and
splines – Rigid and flexible couplings.

UNIT – III DESIGN OF TEMPORARY AND PERMANENT JOINTS ME3591 Design of Machine Elements Important Questions

Threaded fasteners – Bolted joints including eccentric loading, Knuckle joints, Cotter joints – Welded jointsButt, Fillet and parallel transverse fillet welds – welded joints subjected to bending, torsional and eccentric
loads, riveted joints for structures – theory of bonded joints.

UNIT – IV DESIGN OF ENERGY STORING ELEMENTS AND ENGINE COMPONENTS ME3591 Design of Machine Elements Question Bank

Types of springs, design of helical and concentric springs–surge in springs, Design of laminated springs –
rubber springs – Flywheels considering stresses in rims and arms for engines and punching machines– Solid
and Rimmed flywheels- connecting rods and crank shafts

UNIT – V DESIGN OF BEARINGS AND MISCELLANEOUS ELEMENTS ME3591 Design of Machine Elements Question Paper

Sliding contact and rolling contact bearings – Hydrodynamic journal bearings, Sommerfeld Number, Raimondi
& Boyd graphs, — Selection of Rolling Contact bearings –Design of Seals and Gaskets.

Syllabus	Click Here
Notes	Click Here
Important Questions	Click Here
Previous Year Question Paper	Click Here
Question Bank	Click Here

TEXT BOOKS: ME3591 Design of Machine Elements Notes

1. Bhandari V B, “Design of Machine Elements”, 4th Edition , Tata McGraw-Hill Book Co, 2016
2. Joseph Shigley, Richard G. Budynas and J. Keith Nisbett “Mechanical Engineering Design”, 10th Edition,
Tata McGraw-Hill , 2015.

REFERENCES: ME3591 Design of Machine Elements Important Questions

1. Ansel C Ugural, “Mechanical Design – An Integral Approach”, 1st Edition, Tata McGraw-Hill Book Co,
2004.
2. Merhyle Franklin Spotts, Terry E. Shoup, and Lee EmreyHornberger, “Design of Machine Elements”
8th Edition, Printice Hall, 2004.
3. Robert C. Juvinall and Kurt M. Marshek, “Fundamentals of Machine component Design”,6th Edition,
Wiley, 2017.
4. Sundararajamoorthy T. V. and Shanmugam .N, “Machine Design”, Anuradha Publications, Chennai,
2003.
5. Design of Machine Elements | SI Edition | Eighth Edition | By Pearson by M. F. Spotts, Terry E. Shoup,
et al. | 25 March 2019

Anna University Regulation 2021 Study Materials

Tags Important Questions, Notes, Question Paper, Syllabus

Important question Notes question bank Question Paper R-2021 Syllabus

CE3503 Foundation Engineering

Post author By Mr. Padeepz
Post date May 23, 2023
No Comments on CE3503 Foundation Engineering

CE3503 Foundation Engineering Study Materials

Anna University – CE3503 Foundation Engineering Regulation 2021 Syllabus , Notes , Important Questions, Question Paper with Answers Previous Year Question Paper.

UNIT I SITE INVESTIGATION AND SELECTION OF FOUNDATION CE3503 Foundation Engineering Question Paper

Scope and objectives – Methods of exploration – Auguring and boring – Wash boring and rotary
drilling – Depth and spacing of bore holes – Soil samples – Representative and undisturbed –
Sampling methods – Split spoon sampler, Thin wall sampler, Stationary piston sampler – Penetration
tests (SPT and SCPT) – Data interpretation – Strength parameters and Evaluation of Liquefaction
potential – Selection of foundation based on soil condition- Bore log report.

UNIT II BEARING CAPACITY OF SHALLOW FOUNDATION CE3503 Foundation Engineering Question Bank

Introduction – Location and depth of foundation – Codal provisions – Bearing capacity of shallow
foundation on homogeneous deposits – Terzaghi’s formula and BIS formula – Factors affecting
bearing capacity – Bearing capacity from in-situ tests (SPT, SCPT and plate load) – Allowable
bearing pressure – Seismic considerations in bearing capacity evaluation. Determination of
Settlement of foundations on granular and clay deposits – Total and differential settlement –
Allowable settlements – Codal provision – Methods of minimizing total and differential settlements.

UNIT III FOOTINGS AND RAFTS CE3503 Foundation Engineering Question Bank

Types of Isolated footing, Combined footing, Mat foundation – Contact pressure and settlement
distribution – Proportioning of foundations for conventional rigid behaviour – Minimum depth for rigid
behaviour – Applications – Floating foundation – Special foundations – Seismic force consideration
– Codal provision

UNIT IV PILE FOUNDATION CE3503 Foundation Engineering Important Questions

Types of piles and their functions – Factors influencing the selection of pile – Carrying capacity of
single pile in granular and cohesive soil – Static formula – Dynamic formulae (Engineering news and
Hileys) – Capacity from insitu tests (SPT, SCPT) – Negative skin friction – Uplift capacity- Group
capacity by different methods (Field’s rule, Converse – Labarra formula and block failure criterion) –
Settlement of pile groups – Interpretation of pile load test (routine test only), Under reamed piles –
Capacity under compression and uplift – Codal provision.

UNIT V RETAINING WALLS CE3503 Foundation Engineering Notes

Plastic equilibrium in soils – Active and passive states – Rankine’s theory – Cohesionless and
cohesive soil – Coulomb’s wedge theory – Condition for critical failure plane – Earth pressure on
retaining walls of simple configurations – Culmann Graphical method – Pressure on the wall due to
line load – Stability analysis of retaining walls – Codal provision.

Syllabus	Click Here
Notes	Click Here
Important Questions	Click Here
Previous Year Question Paper	Click Here
Question Bank	Click Here

TEXTBOOKS: CE3503 Foundation Engineering Notes

1. Murthy, V.N.S., “Soil Mechanics and Foundation Engineering”, CBS Publishers and Distributers Ltd., New Delhi, 2015.

2. Gopal Ranjan and Rao A.S.R. “Basic and Applied soil mechanics”, New Age International (P)
Ltd, New Delhi,2006.

REFERENCES: CE3503 Foundation Engineering Syllabus

1. Das, B.M. “Principles of Foundation Engineering” (Eigth edition), Thompson Asia Pvt. Ltd.,
Singapore, 2017.
2. Kaniraj, S.R. “Design aids in Soil Mechanics and Foundation Engineering”, Tata McGraw Hill
publishing company Ltd., New Delhi, 2017.
3. Varghese, P.C.,”Foundation Engineering”, Prentice Hall of India Private Limited, New Delhi,
2012.
4. Punmia, B.C., “Soil Mechanics and Foundations”, Laxmi Publications Pvt.Ltd., New Delhi,
2017.

Anna University Regulation 2021 Study Materials

Tags Important Questions, Notes, Question Paper, Syllabus

Important question Notes question bank Question Paper R-2021 Syllabus

CE3502 Structural Analysis 1

Post author By Mr. Padeepz
Post date May 23, 2023
No Comments on CE3502 Structural Analysis 1

CE3502 Structural Analysis 1 Study Materials

Anna University – CE3502 Structural Analysis 1 Regulation 2021 Syllabus , Notes , Important Questions, Question Paper with Answers Previous Year Question Paper

UNIT I ANALYSIS OF TRUSSES CE3502 Structural Analysis 1 Syllabus

Determinate and indeterminate trusses – analysis of determinate trusses – method of joints – method
of sections – Deflections of pin-jointed plane frames – lack of fit – change in temperature method of
tension coefficient – Application to space trusses.

UNIT II SLOPE DEFLECTION METHOD CE3502 Structural Analysis 1 Notes

Slope deflection equations – Equilibrium conditions – Analysis of continuous beams and rigid frames
– Rigid frames with inclined members – Support settlements – symmetric frames with symmetric and
skew-symmetric loadings.

UNIT III MOMENT DISTRIBUTION METHOD CE3502 Structural Analysis 1 Important Questions

Stiffness – distribution and carry over factors –- Analysis of continuous Beams- Plane rigid frames
with and without sway – Support settlement – symmetric frames with symmetric and skew-symmetric
loadings.

UNIT IV FLEXIBLITY METHOD CE3502 Structural Analysis 1 Question Bank

Primary structures – Compatibility conditions – Formation flexibility matrices – Analysis of
indeterminate pin- jointed plane frames, continuous beams and rigid jointed plane frames by direct
flexibility approach.

UNIT V STIFFNESS METHOD CE3502 Structural Analysis 1 Question Paper

Restrained structure –Formation of stiffness matrices – equilibrium condition – Analysis of Continuous
Beams, Pin-jointed plane frames and rigid frames by direct stiffness method.

Syllabus	Click Here
Notes	Click Here
Important Questions	Click Here
Previous Year Question Paper	Click Here
Question Bank	Click Here

TEXTBOOKS: CE3502 Structural Analysis 1

1. Bhavikatti, S.S,Structural Analysis,Vol.1,& 2, Vikas Publishing House Pvt.Ltd.New Delhi-4,
2014.
2. Punmia.B.C, Ashok Kumar Jain & Arun Kumar Jain, Theory of structures, Laxmi Publications,
New Delhi, 2004.

REFERENCES: CE3502 Structural Analysis 1

1. William Weaver, Jr and James M.Gere, Matrix analysis of framed structures, CBS Publishers &
Distributors, Second Edition, Delhi, 2004
2. Reddy .C.S, “Basic Structural Analysis”, Tata McGraw Hill Publishing Company, 2005.
3. Negi L.S. and Jangid R.S., Structural Analysis, Tata McGraw Hill Publishing. Co. Ltd. 2004
4. Bhavikatti, S.S, Matrix Method of Structural Analysis, I. K. International Publishing House
Pvt.Ltd.,New Delhi-4, 2014.

Anna University Regulation 2021 Study Materials

Tags Important Questions, Notes, Question Paper, Syllabus

Important question Notes question bank Question Paper R-2021 Syllabus

CE3501 Design of Reinforced Concrete Structural Elements

Post author By Mr. Padeepz
Post date March 25, 2023
No Comments on CE3501 Design of Reinforced Concrete Structural Elements

CE3501 Design of Reinforced Concrete Structural Elements

Study Materials

Anna University – CE3501 Design of Reinforced Concrete Structural Elements Regulation 2021 Syllabus , Notes , Important Questions, Question Paper with Answers Previous Year Question Paper.

UNIT I METHODS OF DESIGN OF CONCRETE STRUCTURES CE3501 Design of Reinforced Concrete Structural Elements
Concept of Elastic method, ultimate load method and limit state method – Working stress method as
detailed in IS code – Design of Singly Reinforced beam by working stress method – Limit State
philosophy as detailed in IS code – Advantages of Limit State Method over other methods – Analysis
and design of singly and doubly reinforced rectangular beams by limit State Method.

UNIT II LIMIT STATE METHOD – FLANGED BEAM, SHEAR & TORSION CE3501 Design of Reinforced Concrete Structural Elements Question Paper
Analysis and design of flanged beams – Use of design aids for Flexure – Behaviour of RC members
in bond and Anchorage – Design requirements as per current code – Behaviour of RC beams in shear
and torsion – Design of RC members for combined bending, shear and torsion – serviceability.

UNIT III LIMIT STATE DESIGN OF SLABS AND STAIRCASE CE3501 Design of Reinforced Concrete Structural Elements Important Questions
Analysis and design of cantilever, one way, two way and continuous slabs subjected to uniformly
distributed load for various boundary conditions- Types of Staircases – Design of dog-legged
Staircase –Introduction to Flat Slab.

UNIT IV LIMIT STATE DESIGN OF COLUMNS CE3501 Design of Reinforced Concrete Structural Elements Notes
Types of columns – Design of short Rectangular and circular columns for axial, uniaxial and biaxial
bending.

UNIT V LIMIT STATE DESIGN OF FOOTING CE3501 Design of Reinforced Concrete Structural Elements Syllabus
Design of wall footing – Design of axially and eccentrically loaded rectangular pad and sloped
footings – Design of combined rectangular footing for two columns only.

Syllabus	Click Here
Notes	Click Here
Important Questions	Click Here
Previous Year Question Paper	Click Here
Question Bank	Click Here

TEXT BOOKS:
1. Gambhir.M.L., “Fundamentals of Reinforced Concrete Design”, Prentice Hall of India Private
Limited, New Delhi, 2006.
2. Krishnaraju.N “ Design of Reinforced Concrete Structurres “, CBS Publishers & Distributors
Pvt. Ltd., New Delhi.

REFERENCES:
1. Sinha, S.N., “Reinforced Concrete Design”, Tata McGraw Hill Publishing Company Ltd., New
Delhi, 2017
2. Unnikrishna Pillai, S., Devdas Menon, “Reinforced Concrete Design”, Tata McGraw Hill
Publishing Company Ltd., 2021
3. Punmia.B.C., Ashok Kumar Jain, Arun Kumar Jain, “Limit State Design of Reinforced
Concrete”,Laxmi Publication Pvt. Ltd., New Delhi, 2016
4. Shah V L Karve S R., “Limit State Theory and Design of Reinforced Concrete”, Structures
Publilcations, Pune, 2013

Tags Important Questions, Notes, Question Paper, Syllabus

Important question Notes question bank Question Paper R-2021 Syllabus

GE3152 Heritage of Tamils / தமிழர்மரபு [PDF] Notes, IQ

Post author By Mr. Padeepz
Post date March 23, 2023
No Comments on GE3152 Heritage of Tamils / தமிழர்மரபு [PDF] Notes, IQ

GE3152 Heritage of Tamils / தமிழர்மரபு Study Materials

Anna University – GE3152 Heritage of Tamils / தமிழர்மரபு Regulation 2021 Syllabus , Notes , Important Questions, Question Paper with Answers Previous Year Question Paper.

UNIT I LANGUAGE AND LITERATURE 3 GE3152 Heritage of Tamils / தமிழர்மரபு
Language Families in India – Dravidian Languages – Tamil as aClassical Language – Classical
Literature in Tamil – Secular Nature of Sangam Literature – Distributive Justice in Sangam Literature
– Management Principles in Thirukural – Tamil Epics and Impact of Buddhism & Jainism in Tamil
Land – Bakthi Literature Azhwars and Nayanmars – Forms of minor Poetry – Development of Modern
literature in Tamil – Contribution of Bharathiyar and Bharathidhasan.

UNIT II HERITAGE – ROCK ART PAINTINGS TO MODERN ART – SCULPTURE 3 GE3152 Heritage of Tamils / தமிழர்மரபு
Hero stone to modern sculpture – Bronze icons – Tribes and their handicrafts – Art of temple car
making – – Massive Terracotta sculptures, Village deities, Thiruvalluvar Statue at Kanyakumari,
Making of musical instruments – Mridhangam, Parai, Veenai, Yazh and Nadhaswaram – Role of
Temples in Social and Economic Life of Tamils.

UNIT III FOLK AND MARTIAL ARTS 3 GE3152 Heritage of Tamils / தமிழர்மரபு
Therukoothu, Karagattam, Villu Pattu, Kaniyan Koothu, Oyillattam, Leatherpuppetry, Silambattam,
Valari, Tiger dance – Sports and Games of Tamils.

UNIT IV THINAI CONCEPT OF TAMILS 3 GE3152 Heritage of Tamils / தமிழர்மரபு
Flora and Fauna of Tamils & Aham and Puram Concept from Tholkappiyam and Sangam Literature
– Aram Concept of Tamils – Education and Literacy during Sangam Age – Ancient Cities and Ports
of Sangam Age – Export and Import during Sangam Age – Overseas Conquest of Cholas.

UNIT V CONTRIBUTION OF TAMILS TO INDIAN NATIONAL MOVEMENT AND INDIAN
CULTURE 3 GE3152 Heritage of Tamils / தமிழர்மரபு
Contribution of Tamils to Indian Freedom Struggle – The Cultural Influence of Tamils over the other
parts of India – Self-Respect Movement – Role of Siddha Medicine in Indigenous Systems of
Medicine – Inscriptions & Manuscripts – Print History of Tamil Books.

Syllabus	Click Here
Notes	Click Here
Important Questions	Click Here
Previous Year Question Paper	Click Here
Question Bank	Click Here

TEXT-CUM-REFERENCE BOOKS
1. தமிழக வரலொறு – மக்களும் பண் பொடும் – மக.மக. பிள்மள (தவளியீடு:
தமிழ்நொடு பொடநூல் மற்றும் கல்வியியல் பணிகள் கழகம்).
2. கணினித்தமிழ் – முமனவர்இல. சுந்தரம். (விகடன் பிரசுரம்).
3. கீழடி – மவமக நதிக்கமரயில் ெங்ககொல நகர நொகரிகம் (ததொல்லியல் துமற
தவளியீடு)
4. தபொருமந – ஆற்றங்கமர நொகரிகம். (ததொல்லியல் துமற தவளியீடு)
5. Social Life of Tamils (Dr.K.K.Pillay) A joint publication of TNTB & ESC and RMRL – (in print)
6. Social Life of the Tamils – The Classical Period (Dr.S.Singaravelu) (Published by:
International Institute of Tamil Studies.
7. Historical Heritage of the Tamils (Dr.S.V.Subatamanian, Dr.K.D. Thirunavukkarasu)
(Published by: International Institute of Tamil Studies).
8. The Contributions of the Tamils to Indian Culture (Dr.M.Valarmathi) (Published by:
International Institute of Tamil Studies)
9. Keeladi – ‘Sangam City C ivilization on the banks of river Vaigai’ (Jointly Published by:
Department ofArchaeology & Tamil Nadu Text Book and Educational Services Corporation,
Tamil Nadu)
10. Studies in the History of India with Special Reference to Tamil Nadu (Dr.K.K.Pillay)
(Publishedby: The Author)
11. Porunai Civilization (Jointly Published by: Department of Archaeology & Tamil Nadu Text
Bookand Educational Services Corporation, Tamil Nadu)
12. Journey of Civilization Indus to Vaigai (R.Balakrishnan) (Published by: RMRL) – Reference
Book

Anna University Regulation 2021 Study Materials

Tags Important Questions, Notes, Question Paper, Syllabus

Important question Notes question bank Question Paper R-2021 Syllabus

CS3481 Database Management Systems Laboratory [PDF]

Post author By Mr. Padeepz
Post date January 3, 2023
2 Comments on CS3481 Database Management Systems Laboratory [PDF]

CS3481 Database Management Systems Laboratory Study Materials

Anna University – CS3481 Database Management Systems Laboratory Regulation 2021 Syllabus , Notes Lab Manual, Viva Important Questions, Question Paper with Answers Previous Year Question Paper.

LIST OF EXPERIMENTS: CS3481 Database Management Systems Lab Manual
1. Create a database table, add constraints (primary key, unique, check, Not null), insert rows,
update and delete rows using SQL DDL and DML commands.
2. Create a set of tables, add foreign key constraints and incorporate referential integrity.
3. Query the database tables using different ‘where’ clause conditions and also implement
aggregate functions.
4. Query the database tables and explore sub queries and simple join operations.
5. Query the database tables and explore natural, equi and outer joins.
6. Write user defined functions and stored procedures in SQL.
7. Execute complex transactions and realize DCL and TCL commands.
8. Write SQL Triggers for insert, delete, and update operations in a database table.
9. Create View and index for database tables with a large number of records.
10. Create an XML database and validate it using XML schema.
11. Create Document, column and graph based data using NOSQL database tools.
12. Develop a simple GUI based database application and incorporate all the above-mentioned
features CS3481 Database Management Systems Lab Manual
13. Case Study using any of the real life database applications from the following list
a) Inventory Management for a EMart Grocery Shop
b) Society Financial Management
c) Cop Friendly App – Eseva
d) Property Management – eMall
e) Star Small and Medium Banking and Finance
 Build Entity Model diagram. The diagram should align with the business and
functional goals stated in the application.
 Apply Normalization rules in designing the tables in scope.
 Prepared applicable views, triggers (for auditing purposes), functions for enabling
enterprise grade features.
 Build PL SQL / Stored Procedures for Complex Functionalities, ex EOD Batch
Processing for calculating the EMI for Gold Loan for each eligible Customer.
● Ability to showcase ACID Properties with sample queries with appropriate settings CS3481 Database Management Systems Viva Questions

Syllabus	Click Here
Notes	Click Here
Important Questions	Click Here
Previous Year Question Paper	Click Here
Question Bank	Click Here

COURSE OBJECTIVES: CS3481 Database Management Systems Lab Manual
 To learn and implement important commands in SQL.
 To learn the usage of nested and joint queries.
 To understand functions, procedures and procedural extensions of databases.
 To understand design and implementation of typical database applications.
 To be familiar with the use of a front end tool for GUI based application development.