EE8451 Important 16 Mark Questions Linear Integrated Circuits and Applications

EE8451 Important 16 mark Questions Linear Integrated Circuits and Applications LIC Regulation 2017 Anna University free download. LIC Linear Integrated Circuits and Applications Important 16 mark Questions EE8451 pdf free download.

Sample EE8451 Important 16 mark Questions Linear Integrated Circuits and Applications LIC:

1. List out the ideal characteristics of OP AMP?
2. Define CMRR of an amp?
3. Define slew rate. What causes it? EE8451 Important 16 mark Questions Linear Integrated Circuits and Applications LIC
4. List the methods used to provide the external frequency compensation.
5. Mention some of liner applications of OP AMP.
6. Why is RCOMP not needed in differential amplifier?
7. What are the merits and demerits of Dominant pole compensation method?
8. What happens when the common terminal of V+ and V- sources are not grounded?  EE8451 Important 16 mark Questions Linear Integrated Circuits and Applications LIC
9. What is meant by differential amplifier?
10. What is frequency compensation.
11. Design an amplifier with a gain of -10 and input resistance of 10k.
12. An input of 3v is fed to the non-inverting terminal of an op-amp. The amplifier has a Ri of 10KΩ and Rf of 10KΩ .Find the output voltage EE8451 Important 16 mark Questions Linear Integrated Circuits and Applications LIC
13. What is voltage follower?
14. In practical op-amps, what is the effect of high frequency on its performance?
15. What is an opamp? EE8451 Important 16 mark Questions Linear Integrated Circuits and Applications LIC
16.What is a precision diode ? Draw the Circuit diagram of an half wave precision
rectifier with waveform.
17.Draw the circuit diagram of an op-amp integrator. Mention its application.
18. Compare ideal and practical characteristics of an op-amp.
19. Determine the input impedance of 741 operational amplifier employed as voltage EE8451 Important 16 mark Questions Linear Integrated Circuits and Applications LIC
follower having Av =50,000 and Ri = 0.3MEGA OHM.
20. Draw the circuit diagram of differentiator using Op-amp.

1. Explain the following terms in an OP-AMP.
Bias current (4)
Thermal drift (4)
Input offset voltage and current (4)
Thermal drift (4) EE8451 Important 16 mark Questions Linear Integrated Circuits and Applications LIC
2. a. Draw the circuit of differential amplifier and derive the expression for output
voltage in it. (8)
b. With neat diagram explain the working of an OP-AMP base integrator. (8)
3. With neat circuit diagram explain the operation of a OP-AMP differentiator and
derive and expression for the output of a practical differentiator. (16) EE8451 Important 16 mark Questions Linear Integrated Circuits and Applications LIC
4. Explain the frequency compensation techniques of OP-AMP. (16)
5. Draw the circuit of a symmetrical emitter coupled differential amplifier and derive for CMRR. (16)

Subject name	Linear Integrated Circuits and Applications
Short Name	LIC
Semester	4
Subject Code	EE8451
Regulation	2017 regulation

EE8451 Linear Integrated Circuits and Applications Important 16 Mark Questions Click Here To Download

EE8451 Linear Integrated Circuits and Applications Syllabus

---

EE8451 Linear Integrated Circuits and Applications Notes

---

EE8451 Linear Integrated Circuits and Applications Question Bank

---

EE8451 Linear Integrated Circuits and Applications Question Paper

 

Search key words

EE8451 LIC Syllabus 

---

EE8451 LIC Notes

---

EE8451 LIC Important Questions

---

EE8451 LIC Question Bank

---

EE8451 LIC Question Paper

EE8451 Important Questions Linear Integrated Circuits and Applications

EE8451 Important Questions Linear Integrated Circuits and Applications LIC Regulation 2017 Anna University free download. LIC Linear Integrated Circuits and Applications Important Questions EE8451 pdf free download.

Sample EE8451 Important Questions Linear Integrated Circuits and Applications LIC:

1. Why open loop op-amp configurations are not used in linear applications?

The open loop gain of the op-amp is not a constant and it varies with changing the
temperature and variations in power supply. Also the bandwidth of the open loop op-amp
is negligibly small. For this reasons open loop op-amp configurations are not used in linear
applications. EE8451 Important Questions Linear Integrated Circuits and Applications

2. What is the need for frequency compensation in practical op-amps?

Frequency compensation is needed when large bandwidth and lower closed loop gain is
desired. Compensating networks are used to control the phase shift and hence to improve 
the stability. EE8451 Important Questions Linear Integrated Circuits and Applications

3. Define slew rate. What causes slew rate?

The slew rate is defined as the maximum rate of change of output Voltage caused by a step
input voltage. An ideal slew rate is infinite which means that op-amp’s output voltage
should change instantaneously in response to input step voltage. Causes: There is a
capacitor with-in or outside of an op-amp to prevent oscillation. The capacitor which
prevents the output voltage from responding immediately to a fast changing input. Slew
rate of 741 IC is 0.5V/μS.

4. Define an operational amplifier. EE8451 Important Questions Linear Integrated Circuits and Applications

An operational amplifier is a direct-coupled, high gain amplifier consisting of one or more
differential amplifier. By properly selecting the external components, it can be used to
perform a variety of mathematical operations.

5. Mention the characteristics of an ideal op-amp.

 Open loop voltage gain is infinity.
 Input impedance is infinity.
 Output impedance is zero.
 Bandwidth is infinity. 
 Zero offset. EE8451 Important Questions Linear Integrated Circuits and Applications

Subject name	Linear Integrated Circuits and Applications
Short Name	LIC
Semester	4
Subject Code	EE8451
Regulation	2017 regulation

EE8451 Linear Integrated Circuits and Applications Important Questions Click Here To Download

 EE8451 Linear Integrated Circuits and Applications Important 16 Mark Questions

---

EE8451 Linear Integrated Circuits and Applications Syllabus

---

EE8451 Linear Integrated Circuits and Applications Notes

---

EE8451 Linear Integrated Circuits and Applications Question Bank

---

EE8451 Linear Integrated Circuits and Applications Question Paper

 

Search key words

EE8451 LIC Syllabus 

---

EE8451 LIC Notes

---

EE8451 LIC Important Questions

---

EE8451 LIC Question Bank

---

EE8451 LIC Question Paper

EE8403 Important 16 Mark Questions Measurements And Instrumentation

EE8403 Important 16 mark Questions Measurements And Instrumentation Regulation 2017 Anna University free download. Measurements And Instrumentation Important 16 mark Questions EE8403 pdf free download.

Sample EE8403 Important 16 mark Questions Measurements And Instrumentation:

1. What are the functional elements of an instrument? (2)
2. What is meant by accuracy of an instrument? (2)
3. Define international standard for ohm? (2)
4. What is primary sensing element? (2)
5. What is calibration? (2) EE8403 Important 16 mark Questions Measurements And Instrumentation
6. Define the terms precision & sensitivity. (2)
7. What are primary standards? Where are they used? (2)
8. When are static characteristics important? (2)
9. What is standard? What are the different types of standards? (2) EE8403 Important 16 mark Questions Measurements And Instrumentation
10. Define static error. Distinguish reproducibility and repeatability. (2)
11. Distinguish between direct and indirect methods of measurements. (2)
12. With one example explain “Instrumental Errors”. (2)
13. Name some static and dynamic characteristics. (2) EE8403 Important 16 mark Questions Measurements And Instrumentation
14. State the difference between accuracy and precision of a measurement. (2)
15. What are primary and secondary measurements? (2)
16. What are the functions of instruments and measurement systems? (2)
17. What is an error? How it is classified? (2) EE8403 Important 16 mark Questions Measurements And Instrumentation
18. Classify the standards of measurement? (2)
19. Define standard deviation and average deviation. (2)
20. What are the sources of error? (2) EE8403 Important 16 mark Questions Measurements And Instrumentation

PART – B

1. Describe the functional elements of an instrument with its block diagram. And illustrate them
with pressure gauge, pressure thermometer and D’Arsonval galvanometer. (16)
2. What are the three categories of systematic errors in the instrument and explain in detail. (16) EE8403 Important 16 mark Questions Measurements And Instrumentation
3. (i) What are the basic blocks of a generalized instrumentation system. Draw the various blocks and explain their functions. (10)

(ii) Explain in detail calibration technique and draw the calibration curve in general. (6)
4. (i) Discuss in detail various types of errors associated in measurement and how these errors can be minimized? (10)
(ii) Define the following terms in the context of normal frequency distribution of data (6) EE8403 Important 16 mark Questions Measurements And Instrumentation
a) Mean value, b) Deviation, c) Average deviation, d) Variance e) Standard deviation.

Subject name	Measurements And Instrumentation
Short Name	MI
Semester	4
Subject Code	EE8403
Regulation	2017 regulation

EE8403 Measurements And Instrumentation Important 16 Mark Questions Click Here To Download

 EE8403 Measurements And Instrumentation Syllabus

---

EE8403 Measurements And Instrumentation Notes

---

EE8403 Measurements And Instrumentation Question Bank

---

EE8403 Measurements And Instrumentation Question Paper

EE8403 Important Questions Measurements And Instrumentation

EE8403 Important Questions Measurements And Instrumentation Regulation 2017 Anna University free download. Measurements And Instrumentation Important Questions EE8403 pdf free download.

Sample EE8403 Important Questions Measurements And Instrumentation:

17. State the use of potential transformer.
The use of potential transformer are
i. They are used for measurement of high voltage
ii. They are used for energizing relays and protective circuits.

18. How the current transformer and potential transformer are connected in a
circuits?
In a current transfrmer is connected in series and potential transformer is connected in
parallel EE8403 Important Questions Measurements And Instrumentation

19. What is the range of medium resistance?
The range of resistance is about 1 ohm to 100 kilo ohms.
20. Name the methods used for low resistance measurement.
The methods used for low resistance measurement are
1. Ammeter – voltmeter method
2. Potentiometer method
3. Kelvin double bridge method
4. Ohm meter method. EE8403 Important Questions Measurements And Instrumentation

21. What are the types of DC potentiometers?
The types of DC potentiometers are
i. Crompton’s
Potentiometer ii.
Duo-Range
Potentiometer iii.
Vernier Potentiometer
iv. Brook’s Deflectional
Potentiometer EE8403 Important Questions Measurements And Instrumentation

22. What is a bridge circuit?
A bridge circuit consists of a network of four impedance
arms forming a closed circuit. A source of current is applied to two
opposite junctions. The current detector is connected to other two
junctions.

23. What are the types of bridges?
The types of bridges are:
i. DC bridge ii.
AC bridge EE8403 Important Questions Measurements And Instrumentation

24. What are the types of DC bridges?
The types of DC bridges are
i. Wheatstone bridge
ii. Kelvin Double bridge

25. What are the types of AC bridges?
The types of AC bridges are
i. Capacitance comparison bridge
ii. Inductance comparison bridge iii.
Schering bridge EE8403 Important Questions Measurements And Instrumentation
iv. Maxwell’s Inductance and capacitance bridge
v. Hay’s bridge
vi. Anderson bridge
vii. Wien bridge

26. Classify the cables according to their sheathing.
According to their sheathing cables are classified as
i. Armoured cables
ii. Unarmoured cables. EE8403 Important Questions Measurements And Instrumentation

 

Subject name	Measurements And Instrumentation
Short Name	MI
Semester	4
Subject Code	EE8403
Regulation	2017 regulation

EE8403 Measurements And Instrumentation Important Questions Click Here To Download

 EE8403 Measurements And Instrumentation Important 16 Mark Questions

---

EE8403 Measurements And Instrumentation Syllabus

---

EE8403 Measurements And Instrumentation Notes

---

EE8403 Measurements And Instrumentation Question Bank

---

EE8403 Measurements And Instrumentation Question Paper

EE8402 Important 16 Mark Questions Transmission and Distribution

EE8402 Important 16 mark Questions Transmission and Distribution Regulation 2017 Anna University free download. Transmission and Distribution Important 16 mark Questions EE8402 pdf free download.

Sample EE8402 Important 16 mark Questions Transmission and Distribution:

1. (i)From the fundamentals derive an expression for inductance of a single phase transmission system. (8) (ii) Write short notes on corona discharges(8)

2. Derive an expression for capacitances of a single phase transmission system and discuss the effect of earth on capacitance with suitable equation. (16)

3. Derive an expression for inductance i) Of a single-phase overhead line. (8) ii) A conductor is composed of seven identical copper strands each having a radius r. Find the self-GMD of the conductor. (8) EE8402 Important 16 mark Questions Transmission and Distribution

4. i) Derive an expression for the capacitance between conductors of a Single phase overhead line. (8) ii) Find the capacitance between the conductors of a single-phase 10 km long line. The diameter of each conductor is 1.213cm. The spacing between conductors is 1.25m. Also find the capacitance of each conductor neutral. (8) EE8402 Important 16 mark Questions Transmission and Distribution

5. i) Derive the expression for inductance of a two wire 1Φ transmission line (8) ii) Derive the expression for capacitance of a 1Φ transmission line (8)

6. i) What are the advantages of bundled conductors? (4) ii) Derive the expression for capacitance of a double circuit line for hexagonal spacing. (8) iii) Why is the concept of self GMD is not applicable for capacitance? (4)

7. i) Explain clearly the skin effect and the proximity effects when referred to overhead lines. (8) ii) Write a short note on the inductive interference between power and communication lines. (8) EE8402 Important 16 mark Questions Transmission and Distribution

8. i) Derive the expression for the capacitance per phase of the 3 Φ double circuit line flat vertical spacing with transposition. (8) ii) A 3 Φ overhead transmission line has its conductors arranged at the corners of an equilateral triangle of 2m side. Calculate the capacitance of each line conductor per km. Given the diameter of each conductor is 1.25cm. (8)

9. i)Find the capacitance per km per phase of a 3Φ line arrangement in a horizontal plane spaced 8 metres apart. The height of all conductors above the earth is 13 metres. The diameter of each conductor is 2.6 cm. the line is completely transposed and takes the effect of ground into account. (8) ii). Discuss the concept of GMR and GMD in the calculation of transmission line inductance. (8) EE8402 Important 16 mark Questions Transmission and Distribution

10. Find the inductance /phase /km of doublecircuit 3phase line shown in fig. the line is completely Transposed and operates at a frequency of 50Hz. Radius r = 6mm (16)

Subject name	TRANSMISSION AND DISTRIBUTION
Short Name	TD
Semester	4
Subject Code	EE8402
Regulation	2017 regulation

EE8402 Transmission and Distribution Important 16 mark Questions Click Here To Download

 EE8402 Transmission and Distribution Important 2 Mark Questions

---

EE8402 Transmission and Distribution Syllabus

---

EE8402 Transmission and Distribution Notes

---

EE8402 Transmission and Distribution Question Bank

---

EE8402 Transmission and Distribution Question Paper

EE8402 Important Questions Transmission and Distribution

EE8402 Important Questions Transmission and Distribution Regulation 2017 Anna University free download. Transmission and Distribution Important 2 mark Questions EE8402 pdf free download.

Sample EE8402 Important Questions Transmission and Distribution:

37.Define inductance of a line.

It is defined as the loop inductance per unit length of the line .Its unit is henrys per meter. EE8402 important questions Transmission and distribution

38.Define capacitance of a line.

It is defined as shunt capacitance between the two wires per unit line length. Its unit is farads per meter.

39.What is skin effect?

The steady current when flowing through the conductor ,does not distribute uniformly, rather it has the tendency to concentrate near the surface of the conductor. This phenomenon is called skin effect. EE8402 important questions Transmission and distribution

40.Why skin effect is absent in dc system?

The steady current when flowing through a conductor distributes itself uniformly over the whole cross section of the conductor .That is why skin effect is absent in dc system.

41.What is the effect of skin effect on the resistance of the line?

Due to skin effect the effective area of cross section of the conductor through which current flow is reduced. Hence the resistance of the line is increased when ac current is flowing. EE8402 important questions Transmission and distribution

42.On what factors the skin effect depend?

Nature of the material, Diameter of the wire , Frequency and shape of the wire.

43.Define symmetrical spacing.

In 3 phase system when the line conductors are equidistant from each other then it is called symmetrical spacing. EE8402 important questions Transmission and distribution

44.What is the necessity for a double circuit line?

To reduce the inductance per phase and to increase the efficiency.

45.Mention the factors governing the inductance of a line.

Radius of the conductor and the spacing between the conductors.

46.Define a neutral plane.

It is a plane where electric field intensity and potential is zero. EE8402 important questions Transmission and distribution

47.Define proximity effect.

The alternating magnetic flux in a conductor caused by the current flowing in a neighbouring conductor gives rise to a circulating current which cause an apparent increase in the resistance of the conductor .This phenomenon is called as proximity effect.

Subject name	TRANSMISSION AND DISTRIBUTION
Short Name	TD
Semester	4
Subject Code	EE8402
Regulation	2017 regulation

EE8402 Transmission and Distribution Important Questions Click Here To Download

 EE8402 Transmission and Distribution Important 16 Mark Questions

---

EE8402 Transmission and Distribution Syllabus

---

EE8402 Transmission and Distribution Notes

---

EE8402 Transmission and Distribution Question Bank

---

EE8402 Transmission and Distribution Question Paper

 

EE8401 Important 16 Mark Questions ELECTRICAL MACHINES 2

EE8401 Important 16 Mark Questions Electrical Machines 2 Regulation 2017 Anna University free download. Electrical Machines 2 Important 16 Mark Questions EE8401 pdf free download.

Sample EE8401 Important 16 Mark Questions Electrical Machines 2

1. Describe construction and working of an alternator. (16)

2. i) Derive the emf equation of an alternator.(10)
ii) Explain pitch factor and distribution factor.(6) (EE8401 Important 16 Mark Questions Electrical Machines 2)

3. Explain the determination of direct(d) and quadrature(q) axis synchronous reactance using
slip test.(16) (EE8401 Important 16 Mark Questions Electrical Machines 2)

4. A 3 phase, 6 pole, star-connected alternator revolves at 1000 r.p.m. The stator has 90 slots
and 8 conductors per slot. The flux per pole is 0.05 wb (sinusoidally distributed).
Calculate the voltage generated by the machine if the winding factor is 0.96.

5. Elaborate the discussion on capability curve with its boundaries of synchronous machine. (EE8401 Important 16 Mark Questions Electrical Machines 2)

6. Discuss the parallel operation of two alternators with identical speed/load
Characteristics

7. A 3300V, 3phase star connected alternator has a full load current of 100A. On short circuit a
field current of 5A was necessary to produce full load current. The emf on open circuit for
the same excitation was 900V. The armature resistance was 0.8Ω/phase. Determine the full
load voltage regulation for (1)0.8pf lagging (2)0.8pf leading. (EE8401 Important 16 Mark Questions Electrical Machines 2)

8. A 3 phase, 50Hz star connected 2000kA for a certain field excitation. With the same
excitation, the open circuit voltage was 900V. The resistance between a pair of terminals was
0.12 Ω. Find the full load regulation at UPF and 0.8pf lagging. Draw the phasor diagrams. (EE8401 Important 16 Mark Questions Electrical Machines 2)

9. What are the methods of determining regulation of alternator? Discuss each briefly. (EE8401 Important 16 Mark Questions Electrical Machines 2)

10. Two alternators working in parallel supply the following loads (i) lighting load of 500kW,
(ii) 1000kW at 0.9pf, (iii) 500kW at 0.9pf lead, (iv) 800kW at 0.8 lag. One alternator is
supplying 1500kW at 0.95pf lagging. Calculate the load on the other machines. (EE8401 Important 16 Mark Questions Electrical Machines 2)

Subject name	Electrical Machines 2
Short Name	EM 2
Semester	4
Subject Code	EE8401
Regulation	2017 regulation

EE8401 Electrical Machines 2 Important 16 Mark Questions Click Here To Download

EE8401 Electrical Machines 2 Syllabus

---

EE8401 Electrical Machines 2 Notes

---

EE8401 Electrical Machines 2 Question Bank

---

EE8401 Electrical Machines 2 Question Paper

EE8401 Important Questions ELECTRICAL MACHINES 2

EE8401 Important Questions Electrical Machines 2 Regulation 2017 Anna University free download. Electrical Machines 2 Important Questions EE8401 pdf free download.

Sample EE8401 Important Questions Electrical Machines 2

1. What do you mean by single layer and double layer winding? (Apr/may 2017)

In a single layer winding, a slot consists of only one coil side while in double layer it consists of two coil sides arranged one over the other in two layers. EE8401 Important Questions Electrical Machines 2

2. Define Voltage Regulation. (Apr/may 2017) (May/Jun 2016)
The voltage regulation of an alternator is defined as the change in its terminal voltage when full load is
removed, keeping field excitation and speed constant, divided by the rated terminal voltage.

3. Distinguish the use of salient pole and round rotor synchronous machines. (Nov/Dec 2016)
Salient pole types are used for low speed alternators with speeds ranging from 125 to 500 r.p.m. The non
salient pole types are used for high speed alternators called turbo alternators with speeds ranging from 1500 to
3000 r.p.m. EE8401 Important Questions Electrical Machines 2

4. Draw typical open circuit and short circuit characteristics of synchronous machine. (Nov/Dec 2016)

6. Define armature reaction. (Nov/Dec 2015)
The interaction between flux set up by the current carrying armature conductors and the main field
flux is defined as the armature reaction. EE8401 Important Questions Electrical Machines 2

7. What are all the various methods to determine the voltage regulation? (Nov/Dec 2015)
(i) Synchronous Impedance method or EMF method
(ii) Ampere Turns method or MMF method
(iii) Zero Power Factor method or Potier Triangle method
(iv) ASA modified form of MMF method
(v) Two Reaction Theory EE8401 Important Questions Electrical Machines 2

8. Why are Alternators rated in kVA and not in kW? [Nov/Dec 2011]
The continuous power rating of any machine is generally defined as the power the machine or apparatus
can deliver for a continuous period so that the losses incurred in the machine gives rise to a steady temperature
rise not exceeding the limit prescribed by the insulation class. Apart from the constant loss incurred in
Alternators is the copper loss, occurring in the 3 –phase winding which depends on I2R, the square of the
current delivered by the generator. As the current is directly related to apparent power delivered by the
generator, the Alternators have only their apparent power in VA/kVA/MVA as their power rating. EE8401 Important Questions Electrical Machines 2

9. Why is short pitch winding preferred over full-pitch winding? [Nov/Dec 2011]
Advantages
i. Waveform of the emf can be approximately made to a sine wave and distorting harmonics can be
reduced or totally eliminated.
ii. Conductor material, copper, is saved in the back and front end connections due to less coil-span.
iii. Fractional slot winding with fractional number of slots/phase can be used which in turn reduces the
tooth ripples.
iv. Mechanical strength of the coil is increased. EE8401 Important Questions Electrical Machines 2

10. What do you mean by synchronous reactance? [Nov/Dec 2011]
Synchronous reactance X s= (XL + Xa). The value of leakage reactance XL is constant for a machine
based on its construction. Xa depends on saturating condition of the machine. It is the addition of Xa , which
represents the armature reaction effect between two synchronously acting magnetic fields that makes the total
reactance Xa to be called synchronous reactance. EE8401 Important Questions Electrical Machines 2

11. Define distribution factor. [Apr/ May 2009]
The ratio of the vector sum of the emfs induced in all the coils distributed in a no. of slots under one pole
to the arithmetic sum of the emfs induced is known as distribution factor. EE8401 Important Questions Electrical Machines 2

Subject name	Electrical Machines 2
Short Name	EM 2
Semester	4
Subject Code	EE8401
Regulation	2017 regulation

EE8401 Electrical Machines 2 Important Questions Click Here To Download

EE8401 Electrical Machines 2 Important 16 Mark Questions

---

EE8401 Electrical Machines 2 Syllabus

---

EE8401 Electrical Machines 2 Notes

---

EE8401 Electrical Machines 2 Question Bank

---

EE8401 Electrical Machines 2 Question Paper

ME8493 Important 16 Mark Questions Thermal Engineering 1

ME8493 Important 16 Mark Questions Thermal Engineering 1 Regulation 2017 Anna University free download. Thermal Engineering 1 Important 16 Mark Questions ME8493 pdf free download.

Sample ME8493 Important 16 Mark Questions Thermal Engineering 1:

1. Drive an expression for the work done by single stage single acting reciprocating air compressor. ME8493 Important 16 Mark Questions Thermal Engineering 1

2. Drive an expression for the volumetric efficiency of reciprocating air compressors

3. Explain the construction and working of a root blower ME8493 Important 16 Mark Questions Thermal Engineering 1

4. Explain the construction and working of a centrifugal compressor

5. Explain the construction and working of a sliding vane compressor and axial flow compressor.

6. A single stage single acting air compressor is used to compress air from 1 bar and 22° C to 6 bar according to the law PV1 .25 = C. The compressor runs at 125 rpm and the ratio of stroke length to bore of a cylinder is 1.5. If the power required by the compressor is 20 kW, determine the size of the cylinder. ME8493 Important 16 Mark Questions Thermal Engineering 1

7. A single stage single acting air compressor is used to compress air from 1.013 bar and 25° C to 7 bar according to law PV 1.3 = C.The bore and stroke of a cylinder are 120mm and 150mm respectively. The compressor runs at 250 rpm .If clearance volume of the cylinder is 5% of stroke volume and the mechanical efficiency of the compressor is 85%, determine volumetric efficiency, power, and mass of air delivered per minute. ME8493 Important 16 Mark Questions Thermal Engineering 1

8. A two stage singe acting air compressor compresses 2m3 airs from 1 bar and 20° C to 15 bar. The air from the low pressure compressor is cooled to 25° C in the intercooler. Calculate the minimum power required to run the compressor if the compression follows PV1.25=C and the compressor runs at 400 rpm. ME8493 Important 16 Mark Questions Thermal Engineering 1

 

Subject name	Thermal Engineering 1
Short Name	TE 1
Semester	4
Subject Code	ME8493
Regulation	2017 regulation

ME8493 Thermal Engineering 1 Important 16 Mark Questions Click Here To Download

ME8493 Thermal Engineering 1 Syllabus

---

ME8493 Thermal Engineering 1 Notes

---

ME8493 Thermal Engineering 1 Question Bank

---

ME8493 Thermal Engineering 1 Question Paper

ME8493 Important Questions Thermal Engineering 1

ME8493 Important Questions Thermal Engineering 1 Regulation 2017 Anna University free download. Thermal Engineering 1 Important Questions ME8493 pdf free download.

Sample ME8493 Important Questions Thermal Engineering 1:

1. What is meant by cut-off ratio?
2. Draw the P-V and T-S diagram for otto cycle. ME8493 Important Questions Thermal Engineering 1
3. What are the assumptions made for air standard cycle  analysis?
4. Define mean effective pressure as applied to gas power cycles.
5. What is the effect of compression ratio on efficiency of otto cycle?
6. Draw the actual and theoretical P-V diagram for four stroke cycle SI engine.
7. Mention the various processes of dual cycle. ME8493 Important Questions Thermal Engineering 1
8. For the same compression ratio and heat supplied, state the order of decreasing air standard efficiency of Otto, diesel and dual cycle.
9. What are the effects of reheat cycle?
10. What is thermodynamic cycle?
11. What is a thermodynamic cycle?
12. What is meant by air standard cycle? ME8493 Important Questions Thermal Engineering 1
13. Name the various “gas power cycles”.
14. What are the assumptions made for air standard cycle analysis
15. Mention the various processes of the Otto cycle.
16. Mention the various processes of diesel cycle.
17. Mention the various processes of dual cycle.
18. Define air standard cycle efficiency.
19. Define mean effective pressure as applied to gas power cycles. How it is related to indicate power of an I.C engine. ME8493 Important Questions Thermal Engineering 1

20. Define the following terms. (i) Compression ratio (ii) Cut off ratio, (iii) .Expansion ratio

Subject name	Thermal Engineering 1
Short Name	TE 1
Semester	4
Subject Code	ME8493
Regulation	2017 regulation

ME8493 Thermal Engineering 1 Important Questions Click Here To Download

ME8493 Thermal Engineering 1 Important 16 Mark Questions

---

ME8493 Thermal Engineering 1 Syllabus

---

ME8493 Thermal Engineering 1 Notes

---

ME8493 Thermal Engineering 1 Question Bank

---

ME8493 Thermal Engineering 1 Question Paper