Categories

GE8292 Important 16 Mark Questions ENGINEERING MECHANICS EM

Ge8292 Important 16 Mark Questions Engineering mechanics EM Regulation 2017 Anna University free download. Engineering mechanics Important 16 Mark Questions EM Ge8292 pdf free download.

Sample Ge8292 Important 16 Mark Questions Engineering mechanics EM

Part B Questions Ge8292 Important 16 Mark Questions Engineering mechanics EM

1. Two cylinders, having weight WA = 2000N and WB = 1000 N
are resting on smooth inclined planes having inclination 60* and
45ᵒ with the horizontal respectively as shown in figure. They are
connected by a weightless bar AB with hinge connections. The
bar AB makes 15 ᵒ angle with the horizontal. Find the magnitude
of the force P required to hold the system in equilibrium.

2. (i)Four forces act on a bolt A as shown below. Determine the
resultant of the forces on the bolt. (8) (Ge8292 Important 16 Mark Questions Engineering mechanics EM)

(ii)Predict the tension in each cable for the given Figure. (5)

3. (i ) Consider the 75 kg crate shown in the diagram. This crate was
lying between two buildings and it is now being lifted onto a
truck, which will remove it. The crate is supported by a vertical
cable, which is joined at A to two ropes which pass over pulleys
attached to the buildings at B and C. Determined the tension in
each of the ropes AB and AC. (5) (Ge8292 Important 16 Mark Questions Engineering mechanics EM)

(ii) )A force P is applied at ‘O’ to the string AOB as shown in fig.
If the tension in each part of string is 50 N, Find the direction and
magnitude of force P for equilibrium conditions. (8) (Ge8292 Important 16 Mark Questions Engineering mechanics EM)

4. Determine the magnitude and direction of force F shown in figure
so that particle ‘O’ is in equilibrium.

5. A cylindrical roller has a weight of 10kN and it is being pulled
by a force which is inclined at 30˚ with the horizontal as shown in
fig. While moving it comes across an obstacle of 10cm height.
Predict the forcerequired to cross this obstacle when the diameter
of the roller is 70cm. (5) (Ge8292 Important 16 Mark Questions Engineering mechanics EM)

 Subject name ENGINEERING MECHANICS Semester 2 Regulation 2017 regulation