LOGIC GATES
All digital systems are made from a few basic digital circuits that we call logic gates.
These circuits perform the basic logic functions that we will describe in this session.
The physical realization of these logic gates has changed over the years from mechanical relays to electronic vacuum tubes to transistors to integrated circuits containing thousands of transistors.
In this appendix you will learn:
Definitions of the basic gates in terms of truth tables and logic equations DeMorgan’s Theorem
How gates defined in terms of positive and negative logic are related To use multiple-input gates
How to perform a sum of products and a product of sums design from a truth table specification
The Three Basic Logic Gates
Much of a computer’s hardware is comprised of digital logic circuits.
Digital logic circuits are built from just a handful of primitive elements, called logic gates, combined in various ways.
In a digital logic circuit, only two values may be present.
The values may be −5 and + 5 volts Or the values may be 0.5 and 3.5 volts Or the values may be you get the picture.
To allow consideration of all of these possibilities, we will say that digital logic circuits allow the presence of two logical values: 0 and 1.
So, signals in a digital logic circuit take on the values of 0 or 1.
Logic gates are devices which compute functions of these binary signals.
AND Gate
Consider the circuit below which consists of a battery, a light, and two switches in series:
When will the light turn on? It should be clear that the light will turn on only if both switch S1 and switch S2 are shut.
It is quite likely that you encounter the and operation in some shape or form hundreds of times each day.
Consider the simple action of withdrawing funds from your checking account at an ATM.
You will only be able to complete the transaction if you have a checking account and you have money in it.
The ATM will only permit the transaction if you have your ATM card and you enter your correct 4-digit PIN.
To enter the correct PIN, you have to enter the first digit correctly and enter the second digit correctly and enter the third digit correctly and enter the fourth digit correctly.
Returning to the circuit above, we can represent the light’s operation using a table:
The switch is a binary device: it can be open or closed.
Let’s represent these two states as 0 and 1.
Likewise, the light is a binary device with two states: off and on, which we will represent as 0 and 1.
Rewriting the table above with this notation, we have:
This table, which displays the output for all possible combinations of the input, is termed the truth table for the AND operation.
In a computer, this and functionality is implemented with a circuit called an AND gate.
The simplest AND gate has two inputs and one output and is represented pictorially by the symbol:
where the inputs have been labeled a and b, and the output has been labeled c.
If both inputs are 1 then the output is 1. Otherwise, the output is 0.
We represent the and operation by using either the multiplication symbol (i.e., “ ∙ “) or by writing the inputs together.
Thus, for the AND gate shown above, we would write the output c as c = a b or as c = ab.
This would be pronounced: “c = a and b.”
The truth table for the AND gate is shown below. The output c = ab is equal to 1 if and only if (iff) a is 1 and b is 1.
Otherwise, the output is 0.
AND gates can have more than one input (however, an AND gate always has just a single output).
Let’s consider a three-input AND gate:
OR Gate
Now consider the circuit shown below, that has 2 switches in parallel.
It is evident that the light will turn on when either switch S1 is shut or switch S2 is shut or both are shut.
It is quite likely that you encounter the or operation in some shape or form hundreds of times each day.
Consider the simple action of sitting on your couch at home at two in the morning studying for your Digital Logic class.
Your phone will ring if you get a call from Alice or from Bob.
Your home’s security alarm will go off if the front door opens or the back door opens.
You will drink a cup of coffee if you are drowsy or you are thirsty.
We can represent the light’s operation using a table
Changing the words open and off to 0 and the words shut and on to 1 and the table becomes:
This is the truth table for the OR operation.
This or functionality is implemented with a circuit called an OR gate.
The simplest OR gate has two inputs and one output and is represented pictorially by the symbol:
If either or both inputs are 1, the output is 1.
Otherwise, the output is 0.
We represent the or operation by using the addition symbol.
Thus, for the OR gate above, we would write the output c as c = a + b. This would be pronounced: “c = a or b.”
The truth table for the OR gate is shown below. The output is 1 if a is 1 or b is 1; otherwise, the output is 0.
NOT Gate
The last of our basic logic gates is the NOT gate.
The NOT gate always has one input and one output. If the input is 1, the output is 0.
If the input is 0, the output is 1. This operation— chaging the value of the binary input—is called complementation, negation or inversion.
The mathematical symbol for negation is an apostrophe.
If the input to a NOT gate is P, the output, termed the complement, is denoted as P’.
The pictorial symbol for a NOT gate is intended to depict an amplifier followed by a bubble, shown below.
Sometimes the NOT operation is represented by just the bubble, without the amplifier.
The truth table for the NOT gate is shown below:
Three New Gates
Three new gates, NAND, NOR, and Exclusive-OR, can be formed from our three basic gates: NOT, AND, and OR.
NAND Gate
The logic symbol for a NAND gate is like an AND gate with a small circle (or bubble) on the output.we see that the output of a NAND gate is 0 (low) only if both inputs are 1 (high) .
The NAND gate is equivalent to an AND gate followed by an inverter (NOT-AND).
NOR Gate
The logic symbol for a NOR gate is like an OR gate with a small circle (or bubble) on the output.
From the truth table .we see that the output of a NOR gate is 1 (high) only if both inputs are 0 (low).
The NOR gate is equivalent to an OR gate followed by an inverter (NOT-OR), as shown by the two truth tables.
Exclusive OR Gate
The XOR gate logic symbol is like an OR gate symbol with an extra curved vertical line on the input.
From the truth table .we see that the output Z of an XOR gate is 1 (true or high) if either input, X or Y, is 1 (true or high), but not both.
The output Z will be zero if both X and Y are the same (either both 1 or both 0).
The equation for the XOR gate is given as Z = X ^ Y. In this book we will use the symbol ^ as the XOR operator.
Sometimes the symbol or the dollar sign $ is used to denote Exclusive-OR.
We will use the symbol ^ because that is the symbol recognized by the Verilog software used to program a CPLD.
For more details about LOGIC GATES Click here
To see other topics in Basic Electrical and Electronics Engineering Click here
Click Here to Download the pdf of this topic LOGIC GATES
Other links
Bipolar Junction Transistor(BJT)