Construction of Single Phase Transformer, Principle of Operation of Single Phase Transformer
Construction of Single Phase Transformer, Principle of Operation of Single Phase Transformer.
A TRANSFORMER is a device that transfers electrical energy from one circuit to another by electromagnetic induction (transformer action).
The electrical energy is always transferred without a change in frequency, but may involve changes in magnitudes of voltage and current.
Single Phase Transformer
A TRANSFORMER is a device that transfers electrical energy from one circuit to another by electromagnetic induction (transformer action).
The electrical energy is always transferred without a change in frequency, but may involve changes in magnitudes of voltage and current.
Because a transformer works on the principle of electromagnetic induction, it must be used with an input source voltage that varies in amplitude.
There are many types of power that fit this description; for ease of explanation and understanding, transformer action will be explained using an ac voltage as the input source.
BASIC OPERATION OF A Single Phase Transformer
In its most basic form a transformer consists of:
A primary coil or winding. A secondary coil or winding. Core that supports the coils or windings.
Refer to the transformer circuit in figure as you read the following explanation:
The primary winding is connected to a 60 hertz ac voltage source.
The magnetic field (flux) builds up (expands) and collapses (contracts) about the primary winding.
The expanding and contracting magnetic field around the primary winding cuts the secondary winding and induces an alternating voltage into the winding.
This voltage causes alternating current to flow through the load.
The voltage may be stepped up or down depending on the design of the primary and secondary windings.
AN IDEAL Single Phase Transformer
An ideal transformer is shown in the adjacent figure.
Current passing through the primary coil creates a magnetic field.
The primary and secondary coils are wrapped around a core of very high magnetic permeability, such as iron, so that most of the magnetic flux passes through both the primary and secondary coils.
BASIC WORKING PRINCIPLE OF Single Phase Transformer
A transformer can be defined as a static device which helps in the transformation of electric power in one circuit to electric power of the same frequency in another circuit.
The voltage can be raised or lowered in a circuit, but with a proportional increase or decrease in the current ratings.
The main principle of operation of a transformer is mutual inductance between two circuits which is linked by a common magnetic flux.
A basic transformer consists of two coils that are electrically separate and inductive, but are magnetically linked through a path of reluctance.
PRINCIPLE OF Single Phase Transformer
The working principle of the transformer can be understood from the figure below.
As shown above the transformer has primary and secondary windings.
The core laminations are joined in the form of strips in between the strips you can see that there are some narrow gaps right through the cross-section of the core.
These staggered joints are said to be ‘imbricated’. Both the coils have high mutual inductance.
A mutual electro-motive force is induced in the transformer from the alternating flux that is set up in the laminated core, due to the coil that is connected to a source of alternating voltage.
Most of the alternating flux developed by this coil is linked with the other coil and thus produces the mutual induced electro-motive force.
The so produced electro-motive force can be explained with the help of Faraday’s laws of Electromagnetic Induction as
e=M*dI/dt
If the second coil circuit is closed, a current flows in it and thus electrical energy is transferred magnetically from the first to the second coil.
The alternating current supply is given to the first coil and hence it can be called as the primary winding.
The energy is drawn out from the second coil and thus can be called as the secondary winding.
In short, a transformer carries the operations shown below:
Transfer of electric power from one circuit to another.
Transfer of electric power without any change in frequency.
The transfer with the principle of electromagnetic induction.
The two electrical circuits are linked by mutual induction
Construction of Single Phase Transformer
Two coils of wire (called windings) are wound on some type of core material.
In some cases the coils of wire are wound on a cylindrical or rectangular cardboard form.
In effect, the core material is air and the transformer is called an AIR-CORE TRANSFORMER.
Transformers used at low frequencies, such as 60 hertz and 400 hertz, require a core of low-reluctance magnetic material, usually iron.
This type of transformer is called an IRON-CORE TRANSFORMER. Most power transformers are of the iron-core type.
The principle parts of a transformer and their functions are:
The CORE, which provides a path for the magnetic lines of flux.
The PRIMARY WINDING, which receives energy from the ac source.
The SECONDARY WINDING, which receives energy from the primary winding and delivers it to the load.
The ENCLOSURE, which protects the above components from dirt, moisture, and mechanical damage.
(i) CORE
There are two main shapes of cores used in laminated-steel-core transformers.
One is the HOLLOWCORE, so named because the core is shaped with a hollow square through the center.
This shape of core.
Notice that the core is made up of many laminations of steel it shows how the transformer windings are wrapped around both sides of the core.
(ii) WINDINGS
As stated above, the transformer consists of two coils called WINDINGS which are wrapped around a core.
The transformer operates when a source of ac voltage is connected to one of the windings and a load device is connected to the other.
The winding that is connected to the source is called the PRIMARY WINDING.
The winding that is connected to the load is called the SECONDARY WINDING.
The primary is wound in layers directly on a rectangular cardboard form.
For more details about Construction of Single Phase Transformer Click here
To see other topics in Basic Electrical and Electronics Engineering Click here
Click Here to Download the pdf of this topic Construction of Single Phase Transformer
Other links
PRINCIPLE OF DC GENERATOR AND OPERATION OF DC GENERATOR
CHARACTERISTICS OF DC GENERATOR
Principles of DC motor and Operation of DC motor
Classification and Types of DC Motor
Basic Equations of DC Motor and Applications of DC Motor
Basic Equations of Single Phase Transformer and Applications of Single Phase Transformer
Transformer on No Load and Load
Equivalent Circuit of Transformer
Voltage Regulation of Transformer
Single phase induction Motor – Construction, Principle of Operation
Types of Single phase induction Motor