CE8591 Important Questions FOUNDATION ENGINEERING

CE8591 Important Questions FOUNDATION ENGINEERING Regulation 2017 Anna University free download. FOUNDATION ENGINEERING Important Questions CE8591 pdf free download.

Sample CE8591 Important Questions FOUNDATION ENGINEERING:

What are the various methods of soil exploration techniques?

Why the correction applied in SPT test?

Define depth of exploration.

What are the merits and demerits of wash boring?

List the different objectives of site investigation?

Define Auger boring.

How to decide the depth of exploration?

What are the various methods of site exploration?

Explain standard penetration number

Outline the factors affecting quality of samples?

Summarize the functions of drilling mud?

What do you infer from soil exploration and illustrate it uses.

Compare thick wall and thin walled sampler.

Build points on the different types of samplers.

Identify the various parameters affecting the sampling disturbance.

Develop points on the advantages of SCPT over SPT.

Examine a report on spacing of bore holes. CE8591 Important Questions Foundation Engineering

Compare about disturbed & un-disturbed samples.

List out the factors deciding the depth of soil exploration.

List the uses of Bore log report.

List the limitations of static cone penetration test.

Compare representative and non-representative. samples.

Explain about area ratio and give the acceptable range of area ratios for soft and stiff soils.

The internal diameter of a sampler is 50 mm and the external
diameter is 52 mm. Discuss the sample obtained from the sampler
as disturbed or undisturbed?

Discuss about dilatancy correction of soils.

 

Subject name	FOUNDATION ENGINEERING
Short Name	FE
Semester	5
Subject Code	CE8591
Regulation	2017 regulation

CE8591 Important Questions FOUNDATION ENGINEERING Click Here To Download

CE8591 FOUNDATION ENGINEERING Syllabus

---

CE8591 FOUNDATION ENGINEERING Notes

---

CE8591 FOUNDATION ENGINEERING Question Bank

---

CE8591 FOUNDATION ENGINEERING Question Paper

EN8491 Important 8 Mark Questions WATER SUPPLY ENGINEERING

EN8491 Important 8 Mark Questions WATER SUPPLY ENGINEERING Regulation 2017 Anna University free download. WATER SUPPLY ENGINEERING Important 8 Mark Questions EN8491 pdf free download.

Sample EN8491 Important 8 Mark Questions WATER SUPPLY ENGINEERING

i. Describe a few lines about water demand. (3)
ii. In two periods each of 20 years a city has grown from 50000 to 110000 and 160000. Tell the population expected in the next 20 years and also the saturation population. (10)

i. Discuss the factors to be considered in fixing the design period for water supply components. (8) EN8491 Important 8 Mark Questions
ii. Discuss about the drinking water quality standards as per BIS.

i. Briefly discuss about the various types of aquifer’s with neat
sketch. (7)
ii.What are the factors influencing the population forecasting? (6)

The population of a town Panchayat as per past census records are furnished below. Calculate the population in the year 2031 and 2041 using the following methods.
i. Arithmetical increase method (5) (5)
ii.Geometrical increase method (4) (6)
iii. Incremental increase method (4) EN8491 Important 8 Mark Questions

i. Discuss the factors that affect the rate of water demand (7)
ii. Explain about fire demand-its characteristics and the method of estimating it (6)

Describe the different sources of water and their characteristics with respect to Turbidity, Hardness, Chloride and Microbiology. EN8491 Important 8 Mark Questions

i. Classify the different types of springs. (5)
ii. With neat sketch, explain how water is drawn from infiltration galleries.

Explain the laboratory procedure to determine the chlorides, turbidity, sulphates and odour.

Elaborate the public water supply system in accordance with the population forecasting. EN8491 Important 8 Mark Questions 

Summarize various sources of water and give a brief account of the characteristics of water.

Explain the different methods used for prediction of future population of a city, with reference to the design of a water supply system.

Subject name	WATER SUPPLY ENGINEERING
Short Name	WSE
Semester	5
Subject Code	EN8491
Regulation	2017 regulation

EN8491 Important 8 mark Questions WATER SUPPLY ENGINEERING Click Here To Download

EN8491 WATER SUPPLY ENGINEERING Syllabus

---

EN8491 WATER SUPPLY ENGINEERING Notes

---

EN8491 WATER SUPPLY ENGINEERING Question Bank

---

EN8491 WATER SUPPLY ENGINEERING Question Paper

 

EN8491 Important Questions WATER SUPPLY ENGINEERING

EN8491 Important Questions WATER SUPPLY ENGINEERING Regulation 2017 Anna University free download. WATER SUPPLY ENGINEERING Important Questions EN8491 pdf free download.

Sample EN8491 Important Questions WATER SUPPLY ENGINEERING:

Define potable water.

List out the various reasons for water demand encountered in recent times.

Define design period.

Name the drinking water quality standards for any four physic-chemical parameters.

How to determine the storage need for an impounding reservoir?

What are the components of water supply system?

Distinguish between Surface water and Ground water.

Outline the various sources of water.

State the objectives of Public water supply scheme.

Compare and contrast between carbonate and non-carbonate hardness.

Illustrate the factors affecting per capita water demand.

Determine the fire demand for a city with a population of 3500 using Freeman’s formula.

Recommend acceptable quality standards as per BIS 10500: 1983 for fluoride and nitrates.

Summarize the assumptions made in an incremental increase method to forecast population.

Write in brief about the recharge of ground water.

What is water demand? State its types

Define per capita demand. How is per capita demand for water calculated?

Define BOD

State the purposes of carrying out water quality characterization.

Rainwater harvesting is the need of the hour-Examine.

Examine various methods by which ground water recharge is accomplished.

Analyze the purposes of carrying out water quality characterization.

What do you infer from the term per capita demand?

Explain the factors influencing the design period.

Subject name	WATER SUPPLY ENGINEERING
Short Name	WSE
Semester	5
Subject Code	EN8491
Regulation	2017 regulation

EN8491 Important Questions WATER SUPPLY ENGINEERING Click Here To Download

EN8491 WATER SUPPLY ENGINEERING Syllabus

---

EN8491 WATER SUPPLY ENGINEERING Notes

---

EN8491 WATER SUPPLY ENGINEERING Question Bank

---

EN8491 WATER SUPPLY ENGINEERING Question Paper

CE8502 Important Questions STRUCTURAL ANALYSIS I

CE8502 Important 8 Mark Questions STRUCTURAL ANALYSIS I Regulation 2017 Anna University free download. STRUCTURAL ANALYSIS I Important 8 Mark Questions CE8502 pdf free download.

Sample CE8502 Important 8 Mark Questions STRUCTURAL ANALYSIS I

Derive the expression for Statically indeterminate structure by energy method.

Determine the force in various members of the pin-jointed frame as shown in Fig. If the member BC is short by an amount of . All members of the frame have same axial rigidity as AE.

Estimate the reaction components as is shown in figure.
i) Propped cantilever beam
ii) Overhanging beam CE8502 Important 8 Mark Questions

Determine the horizontal reaction of the portal frame shown in Fig, by the energy method.

Determine the horizontal reaction of the portal frame shown in Fig, by the energy method.

Find the forces in the members of the truss shown in Fig.. The axial rigidities are same for all the members.

Determine the reaction components in the continuous beam loaded with uniformly distributed load. EI is constant throughout by using strain energy method. CE8502 Important 8 Mark Questions

Find the forces in the members of the truss shown in Fig.. The axial rigidities are same for all the members.

Determine the reaction components in the continuous beam in figure. EI is constant throughout by using strain energy method.

Determine the deflection and rotation at the free end of the cantilever beam shown in figure. Use unit load method. Given E=2×105 and I=12×106 mm4. CE8502 Important 8 Mark Questions

Analyse the frame ABCD shown in Fig, by Strain energy method.

Determine the deflection of the free end of cantilever of length L subjected to a point load ‘W’ at the free end. CE8502 Important 8 Mark Questions

 

Subject name	STRUCTURAL ANALYSIS I
Short Name	SA1
Semester	5
Subject Code	CE8502
Regulation	2017 regulation

CE8502 Important 8 Mark Questions STRUCTURAL ANALYSIS I Click Here To Download

CE8502 STRUCTURAL ANALYSIS I Syllabus

---

CE8502 STRUCTURAL ANALYSIS I Notes

---

CE8502 STRUCTURAL ANALYSIS I Question Bank

---

CE8502 STRUCTURAL ANALYSIS I Question Paper

CE8502 Important Questions STRUCTURAL ANALYSIS I

CE8502 Important Questions STRUCTURAL ANALYSIS I Regulation 2017 Anna University free download. STRUCTURAL ANALYSIS I Important Questions CE8502 pdf free download.

Sample CE8502 Important Questions STRUCTURAL ANALYSIS I

What is equilibrium condition

Name any four methods used for computation of deflections in structures

What are all type of frames CE8502 Important Questions

What are the assumptions made in the structural analysis?

List out the general methods of analysis in structural analysis.

What is meant by perfect frame?

Write short notes on internal static in determinacy of pin jointed frames.

Define redundant force CE8502 Important Questions

Differentiate external and internal indeterminacy of structures

Define static indeterminacy of a structure

Calculate degree of indeterminacy of propped cantilever beam.

Determine the free end slope of a cantilever due to applied moment M at free end using energy principle.

Explain a pin-jointed frame with a sketch

Explain about principle of least work CE8502 Important Questions

Differentiate determinate and indeterminate of structure

Differentiate static and kinematic indeterminacy of structure

A cantilever is subjected to a single concentrated load P at the middle of the span. Calculate the static indeterminacy of the beam

Define Compatibility Condition

Calculate degree of indeterminacy of the following. Fixed support at both end and hinge at mid span. CE8502 Important Questions

Compare the force and displacement methods of analysis.

Generate the expression for strain energy due to bending and shear force

What are the different support conditions?

State the limitations of Slope deflection method.

Why is slope deflection method called as displacement method?

Write the slope deflection equation for the fixed beam with right half of the span loaded with udl of intensity ’w’ per meter run.

Who introduced Slope deflection method of analysis? CE8502 Important Questions

Write the fixed end moment for a udl distributed for the full span.

Write the fixed end moment for a point load located at mid span.

 

Subject name	STRUCTURAL ANALYSIS I
Short Name	SA1
Semester	5
Subject Code	CE8502
Regulation	2017 regulation

CE8502 Important Questions STRUCTURAL ANALYSIS I Click Here To Download

CE8502 STRUCTURAL ANALYSIS I Syllabus

---

CE8502 STRUCTURAL ANALYSIS I Notes

---

CE8502 STRUCTURAL ANALYSIS I Question Bank

---

CE8502 STRUCTURAL ANALYSIS I Question Paper

CE8501 Important 8 mark Questions DESIGN OF REINFORCED CEMENT CONCRETE ELEMENTS

CE8501 Important 8 Mark Questions DESIGN OF REINFORCED CEMENT CONCRETE ELEMENTS Regulation 2017 Anna University free download. DESIGN OF REINFORCED CEMENT CONCRETE ELEMENTS Important Questions CE8501 pdf free download.

Sample CE8501 Important Questions DESIGN OF REINFORCED CEMENT CONCRETE ELEMENTS

Determine the position of neutral axis and the moment of resistance of a beam 300mm wide and 550mm effective depth. It is reinforced with 3 bars of 16mm diameter. Use M20 grade of concrete and Fe415 grade of steel. Adopt working stress method

A rectangular RC section having a width of 350 mm is reinforced with 2 numbers of 28 mm diameters at an effective depth of 700mm. adopting M20 grade concrete and Fe415 HYSD bars. Determine the ultimate moment of resistance of the section. CE8501 Important 8 Mark Questions

A beam of rectangular section of width 225mm and effective depth 500 mm is simply supported over a span of 5m is reinforced with four members of 20 mm dia mild steel bars in the tension side. Determine the position of neutral axis and the stresses in the top most compression fiber of concrete and tension steel. If the beam carries a UDL of 9KN/m (including self-weight) for the entire span. Use working stress method of design.

Compare and explain detailed notes on under reinforced section and over reinforced section for LS method. CE8501 Important 8 Mark Questions

Identify the expression for the depth of neutral axis and moment of resistance of a singly reinforced beam section under flexure and obtain design constants K, j, Q for M20 concrete and Fe415 steel. Use working stress method.

A singly reinforced section having following details: breadth=200mm, effective depth=450mm and reinforced with 3 nos. of 16mm dia mild steel. Concrete grade M15 and effective cover=35mm, effective span=4m. Determine the maximum imposed load the beam and carry per meter length.

Design a doubly reinforced concrete beam of rectangular section using the following data: Effective span=5m Width of beam=250mm Over all data=500mm Service load (DL+LL) =40KN/m. Effective cover=50mm M20 grade of concrete and Fe415 HYSD bars. CE8501 Important 8 Mark Questions

A doubly reinforced beam of size 250mmX550mm is provided with a compression steel of 900mm 2 with an effective cover of 50mm at top and bottom. The neutral axis depth is equal to limiting neutral axis depth. Find the total area of steel provided. The concrete of beam is M 20 grade and Fe 415 HYSD bars are used and moment of resistance is 460KNm.

Subject name	DESIGN OF REINFORCED CEMENT CONCRETE ELEMENTS
Short Name	DRCCE
Semester	5
Subject Code	CE8501
Regulation	2017 regulation

CE8501 Important 8 Mark Questions DESIGN OF REINFORCED CEMENT CONCRETE ELEMENTS Click Here To Download

CE8501 DESIGN OF REINFORCED CEMENT CONCRETE ELEMENTS Syllabus

---

CE8501 DESIGN OF REINFORCED CEMENT CONCRETE ELEMENTS Notes

---

CE8501 DESIGN OF REINFORCED CEMENT CONCRETE ELEMENTS Question Bank

---

CE8501 DESIGN OF REINFORCED CEMENT CONCRETE ELEMENTS Question Paper

CE8501 Important Questions DESIGN OF REINFORCED CEMENT CONCRETE ELEMENTS

CE8501 Important Questions DESIGN OF REINFORCED CEMENT CONCRETE ELEMENTS Regulation 2017 Anna University free download. DESIGN OF REINFORCED CEMENT CONCRETE ELEMENTS Important Questions CE8501 pdf free download.

Sample CE8501 Important Questions DESIGN OF REINFORCED CEMENT CONCRETE ELEMENTS

1 State the assumptions made for design of RC members in working stress method.

Write down the values of partial safety factor for i) concrete ii) steel.

On what circumstances doubly reinforced beams are to be adopted?

State the main concept of elastic method or working stress method.

What are the three methods of design of reinforced concrete structural Elements? Which of the three methods is the best?

Summarize the main concept of working stress method/Elastic theory of reinforced concrete structures?
What are the different types of loads that have to be considered in the design of a building?

What are the advantages of elastic method or working stress method?

Write down the advantages of limit state method over other methods.

Enumerate balanced section?
Enlist different factors that are influencing the durability of concrete as per BIS.

Define characteristic load and characteristic strength of material?
Justify any two guidelines to select the cross sectional dimensions of RC beam.
What are the classifications available in serviceability limit state?
Enumerate serviceability limit state.
Select any two assumptions are made in elastic theory method.
Mention any two advantages of introducing compression steel in RC beam
Define modular ratio. Examine the modular ratio of M20 & M25grade concrete.
Difference between WSD and LSD?
Show the assumptions made in limit state of collapse by flexure.

 

Subject name	DESIGN OF REINFORCED CEMENT CONCRETE ELEMENTS
Short Name	DRCCE
Semester	5
Subject Code	CE8501
Regulation	2017 regulation

CE8501 Important Questions DESIGN OF REINFORCED CEMENT CONCRETE ELEMENTS Click Here To Download

CE8501 DESIGN OF REINFORCED CEMENT CONCRETE ELEMENTS Syllabus

---

CE8501 DESIGN OF REINFORCED CEMENT CONCRETE ELEMENTS Notes

---

CE8501 DESIGN OF REINFORCED CEMENT CONCRETE ELEMENTS Question Bank

---

CE8501 DESIGN OF REINFORCED CEMENT CONCRETE ELEMENTS Question Paper

CS8494 Important 16 Mark Questions Software Engineering

CS8494 Important 16 mark Questions Software Engineering Regulation 2017 Anna University free download. Software Engineering Important 8 Mark Questions CS8494 pdf free download.

Sample CS8494 Important 16 Mark Questions Software Engineering

1. Explain iterative waterfall and spiral model for software life cycle and various activities in each phase. (16)
???? Water fall model and spiral model
???? Communication
???? Planning
???? Modeling
???? Construction CS8494 Important 16 mark Questions Software Engineering
???? Deployment
???? Advantages and disadvantages

2. Explain about the incremental model. (16)
???? Incremental model
???? Communication
???? Planning CS8494 Important 16 mark Questions Software Engineering
???? Modeling
???? Construction
???? Deployment
???? Advantages and disadvantages

3. Explain in detail about the software process. (16)
???? Process
???? Framework CS8494 Important 16 mark Questions Software Engineering
???? Communication,Planning,Modeling,Construction,Deployment
???? Software project tracking and control
???? Software quality assurance
???? Technical reviews
???? Measurements
???? SCM, reusability management
???? Work product preparation and production

4. Explain in detail about the life cycle process. (16)
???? Waterfall model
???? Incremental model CS8494 Important 16 mark Questions Software Engineering
???? Evolutionary process model
???? Concurrent model
???? Specialized models

5. Explain COCOMO Model in detail? (16)
???? Basics of COCOMO
???? Intermediate

6. Explain in detail about project scheduling & EVA?
???? Basic principles
???? Relationship between people and effort
???? Effort distribution
???? Scheduling CS8494 Important 16 mark Questions Software Engineering
???? Earned value analysis

7 . Explain in detail about Functional and non functional requirements. (16)
???? Introduction about requirements
???? Functional requirements
???? Non Functional requirements

8. Explain in detail about user requirements. (16)
???? Specification user requirements
– Capability and constraint requirements
???? Methods for user requirement capture
– Interviews and surveys CS8494 Important 16 mark Questions Software Engineering
– Studies of existing systems and system requirements

 

Subject name	Software Engineering
Short Name	Software Engg
Semester	4
Subject Code	CS8494
Regulation	2017 regulation

CS8494 Software Engineering Important 16 mark Questions Click Here To Download

CS8494 Software Engineering Syllabus

---

CS8494 Software Engineering Notes

---

CS8494 Software Engineering Question Bank

---

CS8494 Software Engineering Question Paper

CS8494 Important Questions Software Engineering

CS8494 Important Questions Software Engineering Regulation 2017 Anna University free download. Software Engineering Important Questions CS8494 pdf free download.

Sample CS8494 Important Questions Software Engineering

27. What are the various Rapid prototyping techniques?
i. Dynamic high level language development. ii. Database programming.
iii. Component and application assembly.

28. What is the use of User Interface prototyping?
This prototyping is used to pre-specify the look and feel of user interface in an effective way. CS8494 Important Questions Software Engineering

29. What are the characteristics of SRS?
i. Correct – The SRS should be made up to date when appropriate requirements are identified.
ii. Unambiguous – When the requirements are correctly understood then only it is possible to write an
unambiguous software.
iii. Complete – To make SRS complete,it shold be specified what a software designer wants to create
software.
iv. Consistent – It should be consistent with reference to the functionalities identified. CS8494 Important Questions Software Engineering
v. Specific – The requirements should be mentioned specifically.
vi. Traceable – What is the need for mentioned requirement?This should be correctly identified.

30. What are the objectives of Analysis modeling?
i. To describe what the customer requires. CS8494 Important Questions Software Engineering
ii. To establish a basis for the creation of software design.
iii. To devise a set of valid requirements after which the software can be built.

31. What is data modeling?
Data modeling is the basic step in the analysis modeling. In data modeling the data objects are examined
independently of processing. The data model represents how data are related with one another. CS8494 Important Questions Software Engineering

32. What is a data object?
Data object is a collection of attributes that act as an aspect, characteristic, quality, or descriptor of the object. CS8494 Important Questions Software Engineering

33. What are attributes? CS8494 Important Questions Software Engineering
Attributes are the one, which defines the properties of data object.

Subject name	Software Engineering
Short Name	Software Engg
Semester	4
Subject Code	CS8494
Regulation	2017 regulation

CS8494 Software Engineering Important Questions Click Here To Download

 CS8494 Software Engineering Important 16 Mark Questions

---

 CS8494 Software Engineering Syllabus

---

CS8494 Software Engineering Notes

---

CS8494 Software Engineering Question Bank

---

CS8494 Software Engineering Question Paper

CS8493 Important 16 mark Questions Operating Systems

CS8493 Important 16 mark Questions Operating Systems Regulation 2017 Anna University free download. Operating Systems Important 16 mark Questions CS8493 pdf free download.

Sample CS8493 Important 16 mark Questions Operating Systems:

1. Explain in detail the modern computer system
2. Explain the abstract view of the components of a computer system
3. Explain Von Neumann architecture
4. Explain multiprocessor system CS8493 Important 16 mark Questions Operating Systems
5. Explain operating system structure in detail
6. Explain computing environments
7. Explain open source operating system
8. Explain in detail the operating system services CS8493 Important 16 mark Questions Operating Systems
9. Explain in detail operating system structure
10. Write about OS generation

1. Explain in detail Contiguous Memory Allocation.
2. Explain in detail about segmentation. CS8493 Important 16 mark Questions Operating Systems
3. Explain in detail about paging.
4. Explain in detail about segmentation with paging.
5. Describe the following allocation algorithms:
a. First fit
b. Best fit
c. Worst fit
6. Given memory partitions of 100 KB, 500 KB, 200 KB, 300 KB, and 600 KB( in order), how would each off the first‐fit, best‐fit, and worst‐fit algorithms place processes of 212 KB, 417 KB, 112 KB, and 426 KB (in order) ? Which algorithm makes the most efficient use of memory? CS8493 Important 16 mark Questions Operating Systems

7. Explain demand paging.
8. Explain page replacement algorithms.
9. Consider the following page‐reference string:
1,2,3,4,,2,1,5,6,2,1,2,3,7,6,3,2,1,2,3,6
How many page faults would occur for the following replacement algorithms, assuming two, three frames?
Remember that all frames are initially empty, so your first unique pages will all cost one fault each.
• LRU replacement
• FIFO replacement
• Optimal replacement CS8493 Important 16 mark Questions Operating Systems
10. Explain in detail about Thrashing.

Subject name	Operating Systems
Short Name	OS
Semester	4
Subject Code	CS8493
Regulation	2017 regulation

CS8493 Operating Systems Important 16 Mark Questions Click Here To Download

CS8493 Operating Systems Syllabus

---

CS8493 Operating Systems Notes

---

CS8493 Operating Systems Question Bank

---

CS8493 Operating Systems Question Paper