Padeepz

BE3252 Syllabus BASIC ELECTRICAL ELECTRONICS AND INSTRUMENTATION ENGINEERING

BE3252 Syllabus BASIC ELECTRICAL ELECTRONICS AND INSTRUMENTATION ENGINEERING Regulation 2021 Anna University free download. BASIC ELECTRICAL ELECTRONICS AND INSTRUMENTATION ENGINEERING Syllabus BE3252 pdf download free.

UNIT I ELECTRICAL CIRCUITS BE3252 Syllabus

DC Circuits: Circuit Components: Conductor, Resistor, Inductor, Capacitor – Ohm’s Law – Kirchhoff’s Laws – Simple problems- Nodal Analysis, Mesh analysis with Independent sources
only (Steady state) Introduction to AC Circuits and Parameters: Waveforms, Average value, RMS Value, Instantaneous power, real power, reactive power and apparent power, power factor – Steady state analysis of RLC circuits (Simple problems only), Three phase supply – star and delta connection – power in three-phase systems

UNIT II MAGNETIC CIRCUITS AND ELECTRICAL INSTALLATIONS BEEIE Syllabus

Magnetic circuits-definitions-MMF, flux, reluctance, magnetic field intensity, flux density, fringing, self and mutual inductances-simple problems. Domestic wiring , types of wires and cables, earthing ,protective devices- switch fuse unitMiniature circuit breaker-moulded case circuit breaker- earth leakage circuit breaker, safety
precautions and First Aid

UNIT III ELECTRICAL MACHINES BE3252 Syllabus

Construction and Working principle- DC Separately and Self excited Generators, EMF equation, Types and Applications. Working Principle of DC motors, Torque Equation, Types and Applications. Construction, Working principle and Applications of Transformer, Three phase Alternator, Synchronous motor and Three Phase Induction Motor.

UNIT IV ANALOG ELECTRONICS

Resistor, Inductor and Capacitor in Electronic Circuits- Semiconductor Materials: Silicon &Germanium – PN Junction Diodes, Zener Diode –Characteristics Applications – Bipolar Junction Transistor-Biasing, JFET, SCR, MOSFET,IGBT – Types, I-V Characteristics and Applications, Rectifier and Inverters, harmonics

UNIT V SENSORS AND TRANSDUCERS BE3252 Syllabus

Sensors, solenoids, pneumatic controls with electrical actuator, mechatronics, types of valves and its applications, electro-pneumatic systems, proximity sensors, limit switches, piezoelectric, hall
effect, photo sensors,Strain gauge, LVDT, differential pressure transducer,optical and digital transducers, Smart sensors, Thermal Imagers.

BE3252 Syllabus BASIC ELECTRICAL, ELECTRONICS AND INSTRUMENTATION ENGINEERING Click Here To Download

BE3252 Notes BASIC ELECTRICAL, ELECTRONICS AND INSTRUMENTATION ENGINEERING 

BE3252 Important Questions BASIC ELECTRICAL, ELECTRONICS AND INSTRUMENTATION ENGINEERING

BE3252 Question Bank BASIC ELECTRICAL, ELECTRONICS AND INSTRUMENTATION ENGINEERING

PH3201 Question Bank PHYSICS FOR CIVIL ENGINEERING

PH3201 Question Bank PHYSICS FOR CIVIL ENGINEERING Regulation 2021 Anna University free download. PHYSICS FOR CIVIL ENGINEERING Question Bank PH3201 pdf download free.

OUTCOMES:

After completion of the course, the students should be able to
 acquire knowledge about heat transfer through different materials, thermal performance of
building and thermal insulation.
 gain knowledge on the ventilation and air conditioning of buildings
 understand the concepts of sound absorption, noise insulation and lighting designs
 know about the processing and applications of composites, metallic glasses, shape memory
alloys and ceramics
 get an awareness on natural disasters such as earth quake, cyclone, fire and safety measures

OBJECTIVES:
 To introduce the basics of heat transfer through different materials, thermal performance of
building and various thermal applications
 To impart knowledge on the ventilation and air conditioning of buildings
 To introduce the concepts of sound insulation and lighting designs
 To give an introduction to the processing and applications of new engineering materials
 To create an awareness on natural disasters and safety measures

UNIT I THERMAL APPLICATIONS

Principles of heat transfer, steady state of heat flow, conduction through compound media-series
and parallel-conductivity of rubber tube and powder materials – heat transfer through fenestrations,
thermal insulation and its benefits – heat gain and heat loss estimation – factors affecting the
thermal performance of buildings, thermal measurements, thermal comfort, indices of thermal
comfort, climate and design of solar radiation, shading devices – central heating.

UNIT II VENTILATION AND REFRIGERATION

Requirements, principles of natural ventilation – ventilation measurements, design for natural
ventilation – Window types and packaged air conditioners – chilled water plant – fan coil systems –
water piping – cooling load – Air conditioning systems for different types of buildings – Protection
against fire to be caused by A.C.Systems.

PH3201 Question Bank PHYSICS FOR CIVIL ENGINEERING

UNIT III ACOUSTICS AND LIGHTING DESIGNS

Methods of sound absorptions – absorbing materials – noise and its measurements, sound
insulation and its measurements, impact of noise in multistored buildings. Visual field glare, colour
– day light calculations – day light design of windows, measurement of day-light and use of models
and artificial skies, principles of artificial lighting, supplementary artificial lighting.

UNIT IV NEW ENGINEERING MATERIALS

Composites – Definition and Classification – Fibre reinforced plastics (FRP) and fiber reinforced
metals (FRM) – Metallic glasses – Shape memory alloys – Ceramics – Classification – Crystalline –
Non Crystalline – Bonded ceramics, Manufacturing methods – Slip casting – Isostatic pressing –
Gas pressure bonding – Properties – thermal, mechanical, electrical and chemical ceramic fibres –
ferroelectric and ferromagnetic ceramics – High Aluminium ceramics.

PH3201 Question Bank PHYSICS FOR CIVIL ENGINEERING

UNIT V NATURAL DISASTERS

Seismology and Seismic waves – Earth quake ground motion – Basic concepts and estimation
techniques – site effects – Probabilistic and deterministic Seismic hazard analysis – Cyclone and
flood hazards – Fire hazards and fire protection, fire-proofing of materials, fire safety regulations
and firefighting equipment – Prevention and safety measures.

TEXT BOOKS:

1. Marko Pinteric, Building Physics, Springer 2017.
2. D.S.Mathur. Elements of Properties of Matter. S Chand & Company , 2010.
3. Hugo Hens, Building Physics: Heat, Air and Moisture, Wiley, 2017

PH3201 Question Bank PHYSICS FOR CIVIL ENGINEERING Click Here To Download

PH3201 Syllabus PHYSICS FOR CIVIL ENGINEERING

PH3201 Notes PHYSICS FOR CIVIL ENGINEERING 

PH3201 Important Questions PHYSICS FOR CIVIL ENGINEERING

PH3201 Important Questions PHYSICS FOR CIVIL ENGINEERING

PH3201 Important Questions PHYSICS FOR CIVIL ENGINEERING Regulation 2021 Anna University free download. PHYSICS FOR CIVIL ENGINEERING Important Questions PH3201 pdf download free.

OBJECTIVES:
 To introduce the basics of heat transfer through different materials, thermal performance of
building and various thermal applications
 To impart knowledge on the ventilation and air conditioning of buildings
 To introduce the concepts of sound insulation and lighting designs
 To give an introduction to the processing and applications of new engineering materials
 To create an awareness on natural disasters and safety measures

UNIT I THERMAL APPLICATIONS

UNIT II VENTILATION AND REFRIGERATION

UNIT III ACOUSTICS AND LIGHTING DESIGNS

UNIT IV NEW ENGINEERING MATERIALS

UNIT V NATURAL DISASTERS

OUTCOMES:
After completion of the course, the students should be able to
 acquire knowledge about heat transfer through different materials, thermal performance of
building and thermal insulation.
 gain knowledge on the ventilation and air conditioning of buildings
 understand the concepts of sound absorption, noise insulation and lighting designs
 know about the processing and applications of composites, metallic glasses, shape memory
alloys and ceramics
 get an awareness on natural disasters such as earth quake, cyclone, fire and safety measures

TEXT BOOKS:

1. Marko Pinteric, Building Physics, Springer 2017.
2. D.S.Mathur. Elements of Properties of Matter. S Chand & Company , 2010.
3. Hugo Hens, Building Physics: Heat, Air and Moisture, Wiley, 2017

REFERENCES:

1. W.R.Stevens. Building Physics: Lighting. Pergamon Press, 2013..
2. Hugo Hens, Applied Building Physics, Wiley, 2016
3. K.G.Budinski and M.K.Budinski. Engineering Materials: Properties and Selection. Pearson
Education, 2016.
4. Peter A. Claisse, Civil Engineering Materials, Elsevier, 2016.
5. Patrick L. Abbott, Natural Disasters, McGraw-Hill, 2017.

PH3201 Important Questions PHYSICS FOR CIVIL ENGINEERING Click Here To Download

PH3201 Syllabus PHYSICS FOR CIVIL ENGINEERING

PH3201 Notes PHYSICS FOR CIVIL ENGINEERING 

PH3201 Question Bank PHYSICS FOR CIVIL ENGINEERING

PH3201 Notes PHYSICS FOR CIVIL ENGINEERING

PH3201 Notes PHYSICS FOR CIVIL ENGINEERING Regulation 2021 Anna University free download. PHYSICS FOR CIVIL ENGINEERING Notes PH3201 pdf download free.

TEXT BOOKS:

1. Marko Pinteric, Building Physics, Springer 2017.
2. D.S.Mathur. Elements of Properties of Matter. S Chand & Company , 2010.
3. Hugo Hens, Building Physics: Heat, Air and Moisture, Wiley, 2017

REFERENCES:

1. W.R.Stevens. Building Physics: Lighting. Pergamon Press, 2013..
2. Hugo Hens, Applied Building Physics, Wiley, 2016
3. K.G.Budinski and M.K.Budinski. Engineering Materials: Properties and Selection. Pearson
Education, 2016.
4. Peter A. Claisse, Civil Engineering Materials, Elsevier, 2016.
5. Patrick L. Abbott, Natural Disasters, McGraw-Hill, 2017.

OUTCOMES:

After completion of the course, the students should be able to
 acquire knowledge about heat transfer through different materials, thermal performance of
building and thermal insulation.
 gain knowledge on the ventilation and air conditioning of buildings
 understand the concepts of sound absorption, noise insulation and lighting designs
 know about the processing and applications of composites, metallic glasses, shape memory
alloys and ceramics
 get an awareness on natural disasters such as earth quake, cyclone, fire and safety measures

OBJECTIVES:

 To introduce the basics of heat transfer through different materials, thermal performance of
building and various thermal applications
 To impart knowledge on the ventilation and air conditioning of buildings
 To introduce the concepts of sound insulation and lighting designs
 To give an introduction to the processing and applications of new engineering materials
 To create an awareness on natural disasters and safety measures

PH3201 Notes PHYSICS FOR CIVIL ENGINEERING Click Here To Download

PH3201 Syllabus PHYSICS FOR CIVIL ENGINEERING

PH3201 Important Questions PHYSICS FOR CIVIL ENGINEERING

PH3201 Question Bank PHYSICS FOR CIVIL ENGINEERING

PH3201 Syllabus PHYSICS FOR CIVIL ENGINEERING

PH3201 Syllabus PHYSICS FOR CIVIL ENGINEERING Regulation 2021 Anna University free download. PHYSICS FOR CIVIL ENGINEERING Syllabus PH3201 pdf download free.

UNIT I THERMAL APPLICATIONS

Principles of heat transfer, steady state of heat flow, conduction through compound media-series
and parallel-conductivity of rubber tube and powder materials – heat transfer through fenestrations,
thermal insulation and its benefits – heat gain and heat loss estimation – factors affecting the
thermal performance of buildings, thermal measurements, thermal comfort, indices of thermal
comfort, climate and design of solar radiation, shading devices – central heating.

UNIT II VENTILATION AND REFRIGERATION

Requirements, principles of natural ventilation – ventilation measurements, design for natural
ventilation – Window types and packaged air conditioners – chilled water plant – fan coil systems –
water piping – cooling load – Air conditioning systems for different types of buildings – Protection
against fire to be caused by A.C.Systems.

PH3201 Syllabus PHYSICS FOR CIVIL ENGINEERING

UNIT III ACOUSTICS AND LIGHTING DESIGNS

Methods of sound absorptions – absorbing materials – noise and its measurements, sound
insulation and its measurements, impact of noise in multistored buildings. Visual field glare, colour
– day light calculations – day light design of windows, measurement of day-light and use of models
and artificial skies, principles of artificial lighting, supplementary artificial lighting.

UNIT IV NEW ENGINEERING MATERIALS

Composites – Definition and Classification – Fibre reinforced plastics (FRP) and fiber reinforced
metals (FRM) – Metallic glasses – Shape memory alloys – Ceramics – Classification – Crystalline –
Non Crystalline – Bonded ceramics, Manufacturing methods – Slip casting – Isostatic pressing –
Gas pressure bonding – Properties – thermal, mechanical, electrical and chemical ceramic fibres –
ferroelectric and ferromagnetic ceramics – High Aluminium ceramics.

PH3201 Syllabus PHYSICS FOR CIVIL ENGINEERING

UNIT V NATURAL DISASTERS

Seismology and Seismic waves – Earth quake ground motion – Basic concepts and estimation
techniques – site effects – Probabilistic and deterministic Seismic hazard analysis – Cyclone and
flood hazards – Fire hazards and fire protection, fire-proofing of materials, fire safety regulations
and firefighting equipment – Prevention and safety measures.

PH3201 Syllabus PHYSICS FOR CIVIL ENGINEERING Click Here To Download

PH3201 Notes PHYSICS FOR CIVIL ENGINEERING 

PH3201 Important Questions PHYSICS FOR CIVIL ENGINEERING

PH3201 Question Bank PHYSICS FOR CIVIL ENGINEERING

MA3251 Question Bank Statistics and Numerical Methods

MA3251 Question Bank Statistics and Numerical Methods Regulation 2021 Anna University free download. Statistics and Numerical Methods Question Bank MA3251 pdf download free.

OUTCOMES: MA3251 Question Bank

Upon successful completion of the course, students will be able to:
 Apply the concept of testing of hypothesis for small and large samples in real life problems.
 Apply the basic concepts of classifications of design of experiments in the field of agriculture.
 Appreciate the numerical techniques of interpolation in various intervals and apply the
numerical techniques of differentiation and integration for engineering problems.
 Understand the knowledge of various techniques and methods for solving first and second
order ordinary differential equations.
 Solve the partial and ordinary differential equations with initial and boundary conditions by
using certain techniques with engineering applications.

UNIT I TESTING OF HYPOTHESIS

UNIT II DESIGN OF EXPERIMENTS

UNIT III SOLUTION OF EQUATIONS AND EIGENVALUE PROBLEMS

UNIT IV INTERPOLATION, NUMERICAL DIFFERENTIATION AND NUMERICAL INTEGRATION

UNIT V NUMERICAL SOLUTION OF ORDINARY DIFFERENTIAL EQUATIONS

OBJECTIVES: MA3251 Question Bank

 This course aims at providing the necessary basic concepts of a few statistical and
numerical methods and give procedures for solving numerically different kinds of problems
occurring in engineering and technology.
 To acquaint the knowledge of testing of hypothesis for small and large samples which plays
an important role in real life problems.
 To introduce the basic concepts of solving algebraic and transcendental equations.
 To introduce the numerical techniques of interpolation in various intervals and numerical
techniques of differentiation and integration which plays an important role in engineering
and technology disciplines.
 To acquaint the knowledge of various techniques and methods of solving ordinary
differential equations.

TEXT BOOKS: MA3251 Question Bank

1. Grewal, B.S., and Grewal, J.S., “Numerical Methods in Engineering and Science”, MA3251 Question Bank
Khanna Publishers, 10th Edition, New Delhi, 2015.
2. Johnson, R.A., Miller, I and Freund J., “Miller and Freund’s Probability and Statistics for
Engineers”, Pearson Education, Asia, 8th Edition, 2015.

REFERENCES: MA3251 Question Bank

1. Burden, R.L and Faires, J.D, “Numerical Analysis”, 9th Edition, Cengage Learning, 2016.
2. Devore. J.L., “Probability and Statistics for Engineering and the Sciences”, Cengage Learning,
New Delhi, 8th Edition, 2014.
3. Gerald. C.F. and Wheatley. P.O. “Applied Numerical Analysis” Pearson Education, Asia, New
Delhi, 7th Edition, 2007. MA3251 Question Bank
4. Gupta S.C. and Kapoor V. K., “ Fundamentals of Mathematical Statistics”, Sultan Chand & MA3251 Question Bank
Sons, New Delhi, 12th Edition, 2020.
5. Spiegel. M.R., Schiller. J. and Srinivasan. R.A., “Schaum’s Outlines on Probability and
Statistics “, Tata McGraw Hill Edition, 4th Edition, 2012.
6. Walpole. R.E., Myers. R.H., Myers. S.L. and Ye. K., “Probability and Statistics for Engineers
and Scientists”, 9th Edition, Pearson Education, Asia, 2010.

MA3251 Question Bank STATISTICS AND NUMERICAL METHODS Click Here To Download

MA3251 Syllabus STATISTICS AND NUMERICAL METHODS

MA3251 Notes STATISTICS AND NUMERICAL METHODS 

MA3251 Important Questions STATISTICS AND NUMERICAL METHODS

MA3251 Important Questions Statistics and Numerical Methods

MA3251 Important Questions Statistics and Numerical Methods Regulation 2021 Anna University free download. Statistics and Numerical Methods Important Questions MA3251 pdf download free.

OBJECTIVES: MA3251 Important Questions

 This course aims at providing the necessary basic concepts of a few statistical and
numerical methods and give procedures for solving numerically different kinds of problems
occurring in engineering and technology.
 To acquaint the knowledge of testing of hypothesis for small and large samples which plays
an important role in real life problems.
 To introduce the basic concepts of solving algebraic and transcendental equations.
 To introduce the numerical techniques of interpolation in various intervals and numerical
techniques of differentiation and integration which plays an important role in engineering
and technology disciplines.
 To acquaint the knowledge of various techniques and methods of solving ordinary
differential equations.

TEXT BOOKS: MA3251 Important Questions

1. Grewal, B.S., and Grewal, J.S., “Numerical Methods in Engineering and Science”,
Khanna Publishers, 10th Edition, New Delhi, 2015.
2. Johnson, R.A., Miller, I and Freund J., “Miller and Freund’s Probability and Statistics for
Engineers”, Pearson Education, Asia, 8th Edition, 2015.

REFERENCES: MA3251 Important Questions

1. Burden, R.L and Faires, J.D, “Numerical Analysis”, 9th Edition, Cengage Learning, 2016.
2. Devore. J.L., “Probability and Statistics for Engineering and the Sciences”, Cengage Learning,
New Delhi, 8th Edition, 2014.
3. Gerald. C.F. and Wheatley. P.O. “Applied Numerical Analysis” Pearson Education, Asia, New
Delhi, 7th Edition, 2007.
4. Gupta S.C. and Kapoor V. K., “ Fundamentals of Mathematical Statistics”, Sultan Chand &
Sons, New Delhi, 12th Edition, 2020. MA3251 Important Questions
5. Spiegel. M.R., Schiller. J. and Srinivasan. R.A., “Schaum’s Outlines on Probability and
Statistics “, Tata McGraw Hill Edition, 4th Edition, 2012.
6. Walpole. R.E., Myers. R.H., Myers. S.L. and Ye. K., “Probability and Statistics for Engineers
and Scientists”, 9th Edition, Pearson Education, Asia, 2010.

MA3251 Important Questions STATISTICS AND NUMERICAL METHODS Click Here To Download

MA3251 Syllabus STATISTICS AND NUMERICAL METHODS

MA3251 Notes STATISTICS AND NUMERICAL METHODS 

MA3251 Question Bank STATISTICS AND NUMERICAL METHODS

MA3251 Notes Statistics and Numerical Methods

MA3251 Notes Statistics and Numerical Methods Regulation 2021 Anna University free download. Statistics and Numerical Methods Notes MA3251 pdf download free.

TEXT BOOKS: MA3251 Notes 

1. Grewal, B.S., and Grewal, J.S., “Numerical Methods in Engineering and Science”,
Khanna Publishers, 10th Edition, New Delhi, 2015.
2. Johnson, R.A., Miller, I and Freund J., “Miller and Freund’s Probability and Statistics for
Engineers”, Pearson Education, Asia, 8th Edition, 2015.

REFERENCES: MA3251 Notes 

1. Burden, R.L and Faires, J.D, “Numerical Analysis”, 9th Edition, Cengage Learning, 2016.
2. Devore. J.L., “Probability and Statistics for Engineering and the Sciences”, Cengage Learning,
New Delhi, 8th Edition, 2014.
3. Gerald. C.F. and Wheatley. P.O. “Applied Numerical Analysis” Pearson Education, Asia, New
Delhi, 7th Edition, 2007.
4. Gupta S.C. and Kapoor V. K., “ Fundamentals of Mathematical Statistics”, Sultan Chand &
Sons, New Delhi, 12th Edition, 2020.
5. Spiegel. M.R., Schiller. J. and Srinivasan. R.A., “Schaum’s Outlines on Probability and
Statistics “, Tata McGraw Hill Edition, 4th Edition, 2012.
6. Walpole. R.E., Myers. R.H., Myers. S.L. and Ye. K., “Probability and Statistics for Engineers
and Scientists”, 9th Edition, Pearson Education, Asia, 2010.

OUTCOMES: MA3251 Notes 

Upon successful completion of the course, students will be able to:
 Apply the concept of testing of hypothesis for small and large samples in real life problems.
 Apply the basic concepts of classifications of design of experiments in the field of agriculture.
 Appreciate the numerical techniques of interpolation in various intervals and apply the
numerical techniques of differentiation and integration for engineering problems.
 Understand the knowledge of various techniques and methods for solving first and second
order ordinary differential equations.
 Solve the partial and ordinary differential equations with initial and boundary conditions by
using certain techniques with engineering applications.

MA3251 Notes STATISTICS AND NUMERICAL METHODS Click Here To Download

MA3251 Syllabus STATISTICS AND NUMERICAL METHODS

MA3251 Important Questions STATISTICS AND NUMERICAL METHODS

MA3251 Question Bank STATISTICS AND NUMERICAL METHODS

MA3251 Syllabus Statistics and Numerical Methods

MA3251 Syllabus Statistics and Numerical Methods Regulation 2021 Anna University free download. Statistics and Numerical Methods Syllabus MA3251 pdf download free.

UNIT I TESTING OF HYPOTHESIS MA3251 Syllabus

Sampling distributions – Tests for single mean, proportion and difference of means (Large and
small samples) – Tests for single variance and equality of variances – Chi square test for
goodness of fit – Independence of attributes.

UNIT II DESIGN OF EXPERIMENTS

One way and two way classifications – Completely randomized design – Randomized block design
– Latin square design – 22 factorial design.

UNIT III SOLUTION OF EQUATIONS AND EIGENVALUE PROBLEMS MA3251 Syllabus

Solution of algebraic and transcendental equations – Fixed point iteration method – Newton
Raphson method- Solution of linear system of equations – Gauss elimination method – Pivoting –
Gauss Jordan method – Iterative methods of Gauss Jacobi and Gauss Seidel – Eigenvalues of a
matrix by Power method and Jacobi’s method for symmetric matrices.

UNIT IV INTERPOLATION, NUMERICAL DIFFERENTIATION AND NUMERICAL INTEGRATION MA3251 Syllabus

Lagrange’s and Newton’s divided difference interpolations – Newton’s forward and backward
difference interpolation – Approximation of derivates using interpolation polynomials – Numerical
single and double integrations using Trapezoidal and Simpson’s 1/3 rules.

UNIT V NUMERICAL SOLUTION OF ORDINARY DIFFERENTIAL EQUATIONS

Single step methods: Taylor’s series method – Euler’s method – Modified Euler’s method – Fourth
order Runge-Kutta method for solving first order differential equations – Multi step methods:
Milne’s and Adams – Bash forth predictor corrector methods for solving first order differential
equations.

Upon successful completion of the course, students will be able to:

 Apply the basic concepts of classifications of design of experiments in the field of agriculture.
 Appreciate the numerical techniques of interpolation in various intervals and apply the
numerical techniques of differentiation and integration for engineering problems.

MA3251 Syllabus STATISTICS AND NUMERICAL METHODS Click Here To Download

MA3251 Notes STATISTICS AND NUMERICAL METHODS 

MA3251 Important Questions STATISTICS AND NUMERICAL METHODS

MA3251 Question Bank STATISTICS AND NUMERICAL METHODS

BA4106 INFORMATION MANAGEMENT

BA4106 INFORMATION MANAGEMENT Regulation 2021 Anna University free download. Syllabus Notes Important Question Question Bank BA4106 pdf download free.

COURSE OBJECTIVES:

 To understand the importance of information in business
 To know about the recent information systems and technologies.

UNIT I INTRODUCTION

Data, Information, Information System, evolution, types based on functions and hierarchy, Enterprise and
functional information systems.

UNIT II SYSTEM ANALYSIS AND DESIGN

System development methodologies, Systems Analysis and Design, Data flow Diagram (DFD),
Decision table, Entity Relationship (ER), Object Oriented Analysis and Design(OOAD), UML diagram.

UNIT III DATABASE MANAGEMENT SYSTEMS

DBMS – types and evolution, RDBMS, OODBMS, RODBMS, Data warehousing, Data Mart, Data mining.

UNIT IV INTEGRATED SYSTEMS, SECURITY AND CONTROL

Knowledge based decision support systems, Integrating social media and mobile technologies in
Information system, Security, IS Vulnerability, Disaster Management, Computer Crimes, Securing the
Web.

UNIT V NEW IT INITIATIVES

Introduction to Deep learning, Big data, Pervasive Computing, Cloud computing, Advancements in AI,
IoT, Block chain, Crypto currency, Quantum computing

TOTAL : 45 PERIODS

COURSE OUTCOMES:

1. Learn the basics of data and information system.
2. Understand the system development methodologies.
3. Understand database management system and its types.
4. Learn the various technologies in information system and its security.
5. Gains knowledge on effective applications of information systems in business.

REFERENCES:

1. Robert Schultheis and Mary Sumner, Management Information Systems – The Manager’ s View,
Tata McGraw Hill, 2008.
2. Kenneth C. Laudon and Jane P Laudon, Management Information Systems – Managing the Digital
Firm, 15 th edition, 2018.
3. Panneerselvam. R, Database Management Systems, 3rd Edition, PHI Learning, 2018.

BA4106 INFORMATION MANAGEMENT Syllabus

BA4106 INFORMATION MANAGEMENT Notes

BA4106 INFORMATION MANAGEMENT Important Question

BA4106 INFORMATION MANAGEMENT Question Bank

Click Here To Download