Categories
question bank

GE6075 Professional Ethics in Engineering Question Bank Regulation 2013 Anna University

GE6075-Professional-Ethics-in-Engineering-Question-Bank-Regulation-2013-Anna-University

GE6075 Professional Ethics in Engineering Question Bank

GE6075 Professional Ethics in Engineering Question Bank Regulation 2013 Anna University free download. GE6075 Question Bank Professional Ethics in Engineering free pdf download.

Sample GE6075 Professional Ethics in Engineering Question Bank:

1. What are human values ?

2. What are ethical values ?

3. Distinguish values from ethics and culture.

4. What is integrity?

(GE6075 Professional Ethics in Engineering Question Bank)

5. Define work ethics.

6. What is service learning?

7. Mention some civic virtues.

8.Write short notes on caring and sharing.

9.What is honesty?

10. What is courage as a value?

11. Define cooperation.

12.Define empathy.

13.Define spirituality.

14.Define integrity.

15.Define compromise.

16.List out any two aspects of honesty.

17. Define self respect and self esteem.

18. What is commitment?

19. What is meant by self confidence?

20. What is stress management?

PART B (GE6075 Professional Ethics in Engineering Question Bank)

1. Explain some important human values.

2.Write a detailed note on work ethics.

3.Explain integrity and honesty in ethics.

4. Explain the importance of self confidence in ethics.

5. List important time wasters. How can one manage time properly?

6. . Explain caring, sharing and living peacefully.

7. Explain commitment and empathy.

8. Explain civic virtue and respect for others and also explain importance of
cooperation.

9. Explain character and spirituality and their importance in ethics.

10.Explain the role of Yoga and meditation in the field of professional excellence and stress management. (GE6075 Professional Ethics in Engineering Question Bank)

Subject Name Professional Ethics in Engineering
Subject code GE6075
Regulation 2013

GE6075 Professional Ethics in Engineering Question Bank Click here to download

GE6075 Professional Ethics in Engineering Syllabus

GE6075 Professional Ethics in Engineering Notes

GE6075 Professional Ethics in Engineering Important questions

Categories
Important question

GE6075 Professional Ethics in Engineering Important questions Regulation 2013 Anna University

GE6075-Professional-Ethics-in-Engineering-Important-questions-Regulation-2013-Anna-University

GE6075 Professional Ethics in Engineering Important questions

GE6075 Professional Ethics in Engineering Important questions Regulation 2013 Anna University free download. GE6075 Important questions Professional Ethics in Engineering free pdf download.

Sample GE6075 Professional Ethics in Engineering Important questions:

1. What are human values?

Values decide the standard of behavior. Some universally accepted values are freedom justice and equality. Other principles of values are love, care, honesty, integrity, self respect.

2. What are ethical values?

Trustworthiness, respect, responsibility, fairness, caring is ethical values

(GE6075 Professional Ethics in Engineering Important questions)

3. Distinguish values from ethics and culture.

Values are mainly related to individuals and since they are related to justice, they remain the some for every one. E.g. truth, honesty, empathy, self respect.
Values do not change from individual to individual. Ethics is common to a group of individuals; the group may be religious or professional. Ethics is mostly based on some code or law and judgment of any action is based individual to individual f conduct or law. Ethics change from Culture commonly refers to conduct of a group. E.g system of worship, marriage It may differ from society to society, nation to nation or religion to religion.

4. What is integrity?

Integrity is the unity of character based on moral values. Consistency in attitudes, emotions and conduct in relations to morally justified actions and values are also the part of integrity of individual. It implies honesty, trustworthiness.

(GE6075 Professional Ethics in Engineering Important questions)

5. Define work ethics

By one’s work one cannot harm others. Any worker cannot escape accountability. Worker has the moral responsibility to see that no other person’s right, private or freedom is impaired or transgressed.

6. What is service learning?

Service learning tells that one has moral responsibility to increase the desirable effects and to decrease the harmful effects. Any service should increase the desirable result.

(GE6075 Professional Ethics in Engineering Important questions)

Subject Name Professional Ethics in Engineering
Subject code GE6075
Regulation 2013

GE6075 Professional Ethics in Engineering Important questions Click here to download

GE6075 Professional Ethics in Engineering Syllabus

GE6075 Professional Ethics in Engineering Notes

GE6075 Professional Ethics in Engineering Question Bank

Categories
r2013 notes

GE6075 Professional Ethics in Engineering Notes Regulation 2013 Anna University

GE6075-Professional-Ethics-in-Engineering-Notes-Regulation-2013-Anna-University

GE6075 Professional Ethics in Engineering Notes

GE6075 Professional Ethics in Engineering Notes Regulation 2013 Anna University free download. GE6075 Notes Professional Ethics in Engineering free pdf download.

OUTCOMES GE6075 Professional Ethics in Engineering Notes:

Upon completion of the course, the student should be able to apply ethics in society, discuss the ethical issues related to engineering and realize the responsibilities and rights in the society

TEXTBOOKS GE6075 Professional Ethics in Engineering Notes:

1. Mike W. Martin and Roland Schinzinger, “Ethics in Engineering”, Tata McGraw Hill, New Delhi, 2003.

2. Govindarajan M, Natarajan S, Senthil Kumar V. S, “Engineering Ethics”, Prentice Hall of India, New Delhi, 2004.

REFERENCES GE6075 Professional Ethics in Engineering Notes:

1. Charles B. Fleddermann, “Engineering Ethics”, Pearson Prentice Hall, New Jersey, 2004.

2. Charles E. Harris, Michael S. Pritchard and Michael J. Rabins, “Engineering Ethics – Concepts and Cases”, Cengage Learning, 2009

3. John R Boatright, “Ethics and the Conduct of Business”, Pearson Education, New Delhi, 2003

4. Edmund G Seebauer and Robert L Barry, “Fundametals of Ethics for Scientists and Engineers”, Oxford University Press, Oxford, 2001

5. Laura P. Hartman and Joe Desjardins, “Business Ethics: Decision Making for Personal Integrity and Social Responsibility” Mc Graw Hill education, India Pvt. Ltd.,New Delhi 2013.

6. World Community Service Centre, ” Value Education”, Vethathiri publications, Erode, 2011

GE6075 Professional Ethics in Engineering Notes

Web sources:
1. www.onlineethics.org
2. www.nspe.org
3. www.globalethics.org
4. www.ethics.org

An elderly carpenter was ready to retire. He told his employer-contractor of his plans to leave the house- building business and live a more leisurely life with his wife enjoying his extended family. He would miss his paycheck, but he needed to retire.

They could get by. The contractor was sorry to see his good worker go and asked if he could build just one more house as a personal favor.

(GE6075 Professional Ethics in Engineering Notes)

Subject Name Professional Ethics in Engineering
Subject code GE6075
Regulation 2013

GE6075 Professional Ethics in Engineering Notes Click here to download

GE6075 Professional Ethics in Engineering Syllabus

GE6075 Professional Ethics in Engineering Important questions

GE6075 Professional Ethics in Engineering Question Bank

 

Categories
UG syllabus R 2013

GE6075 Professional Ethics in Engineering Syllabus Regulation 2013 Anna University

GE6075-Professional-Ethics-in-Engineering-Syllabus-Regulation-2013-Anna-University

GE6075 Professional Ethics in Engineering Syllabus

GE6075 Professional Ethics in Engineering Syllabus Regulation 2013 Anna University free download. GE6075 Syllabus Professional Ethics in Engineering free pdf download.

OBJECTIVES GE6075 Professional Ethics in Engineering Syllabus:

To enable the students to create an awareness on Engineering Ethics and Human Values, to instill Moral and Social Values and Loyalty and to appreciate the rights of others.

UNIT I HUMAN VALUES GE6075 Professional Ethics in Engineering Syllabus

Morals, values and Ethics – Integrity – Work ethic – Service learning – Civic virtue – Respect for others – Living peacefully – Caring – Sharing – Honesty – Courage – Valuing time – Cooperation – Commitment – Empathy – Self confidence – Character – Spirituality – Introduction to Yoga and meditation for professional excellence and stress management.

UNIT II ENGINEERING ETHICS GE6075 Professional Ethics in Engineering Syllabus

Senses of ‘Engineering Ethics’ – Variety of moral issues – Types of inquiry – Moral dilemmas – Moral Autonomy – Kohlberg’s theory – Gilligan’s theory – Consensus and Controversy – Models of professional roles – Theories about right action – Self-interest – Customs and Religion – Uses of Ethical Theories

UNIT III ENGINEERING AS SOCIAL EXPERIMENTATION GE6075 Professional Ethics in Engineering Syllabus

Engineering as Experimentation – Engineers as responsible Experimenters – Codes of Ethics – A Balanced Outlook on Law.

UNIT IV SAFETY, RESPONSIBILITIES AND RIGHTS GE6075 Syllabus Professional Ethics in Engineering 

Safety and Risk – Assessment of Safety and Risk – Risk Benefit Analysis and Reducing Risk – Respect for Authority – Collective Bargaining – Confidentiality – Conflicts of Interest – Occupational Crime – Professional Rights – Employee Rights – Intellectual Property Rights (IPR) – Discrimination

UNIT V GLOBAL ISSUES GE6075 Syllabus Professional Ethics in Engineering

Multinational Corporations – Environmental Ethics – Computer Ethics – Weapons Development – Engineers as Managers – Consulting Engineers – Engineers as Expert Witnesses and Advisors – Moral Leadership –Code of Conduct – Corporate Social Responsibility

Subject Name Professional Ethics in Engineering
Subject code GE6075
Regulation 2013

GE6075 Professional Ethics in Engineering Syllabus Click here to download

GE6075 Professional Ethics in Engineering Notes

GE6075 Professional Ethics in Engineering Important questions

GE6075 Professional Ethics in Engineering Question Bank

 

Categories
Important question

ME6505 DYNAMICS OF MACHINES Question Bank Regulation 2013 Anna University

ME6505 DYNAMICS OF MACHINES Question Bank Regulation 2013 Anna University

ME6505 Dynamics of Machines Question Bank

ME6505 DYNAMICS OF MACHINES Question Bank Regulation 2013 Anna University free download. ME6505 Question Bank DYNAMICS OF MACHINES free pdf download.

Sample ME6505 DYNAMICS OF MACHINES Question Bank:

PART-A (2 Marks)

1. What is free body diagram?

2. Define static force analysis.

3. Differentiate between static and dynamic equilibrium.

4. Define applied and constraint forces.

5. Differentiate between static force analysis and dynamic force analysis.

6. Define inertia force.

7. Define inertia torque.

8. State D’Alembert’s principle.

(ME6505 Dynamics of Machines Question Bank)

9. State the principle of superposition.

10. Define piston effort.

11. Define crank effort and crank-pin effort.

12. What is meant by turning moment diagram or crank effort diagram?

13. Explain the term maximum fluctuation of energy in fly wheel.

14. Define coefficient of fluctuation of energy.

15. Define coefficient of fluctuation of speed.

(ME6505 Dynamics of Machines Question Bank)

16. Define coefficient of steadiness.

17. Why flywheels are needed in forging and pressing operations?

18. What is cam dynamics?

19. Define unbalance and spring surge.

20. Define windup. What is the remedy for camshaft windup?

PART-B (16 Marks) (ME6505 Dynamics of Machines Question Bank)

1. For reciprocating engine, derive the expression for
(i)Velocity and acceleration of the piston
(ii)Angular velocity and angular acceleration of the connecting rod (16)

2. In a reciprocating engine mechanism, if the crank and connecting rod are
300mm and 1m long respectively and the crank rotates at a constant speed of
200r.p.m.Determine analytically,

1. The crank angle at which the maximum velocity occurs and
2. Maximum velocity of piston.
3. Derive the relevant equations. (16)
(i)Deduce the expression for the inertia force in the reciprocating force neglecting
the weight of the connecting rod. (8)

(ME6505 Dynamics of Machines Question Bank)

Subject Name DYNAMICS OF MACHINES
Subject code ME6505
Regulation 2013

ME6505 Dynamics of Machines Question Bank Click here to download

ME6505 Dynamics of Machines Syllabus

ME6505 Dynamics of Machines Notes

ME6505 Dynamics of Machines Important questions

 

 

Categories
Important question

ME6505 DYNAMICS OF MACHINES Important questions Regulation 2013 Anna University

ME6505 DYNAMICS OF MACHINES Important questions Regulation 2013 Anna University

ME6505 Dynamics of Machines Important questions

ME6505 DYNAMICS OF MACHINES Important questions Regulation 2013 Anna University free download. ME6505 Important questions DYNAMICS OF MACHINES free pdf download.

Sample ME6505 DYNAMICS OF MACHINES Important questions:

1. Distinguish between space diagram and free body diagram

Space Diagram is a graphical representation of the system. It generally shows the shape and size of the system, the weight, the externally applied loads, the connection and the supports of the system. Free body diagram is a sketch of the isolated or free body which shows all the pertinent weight forces, the externally applied loads, the reaction from its supports and the connections acting upon
it by the removed elements.

(ME6505 Dynamics of Machines Important questions)

2. Define Static force analysis.

If components of a machine accelerate, inertia is produced due to their masses. However the magnitudes of these forces are small compared to externally applied loads. Hence the inertia effects due to masses are neglected. Such an analysis is known as static force analysis.

(ME6505 Dynamics of Machines Important questions)

3. Define force and applied force.

Force is a pull or push, which acts on the body changes or tends to change the state of rest or uniform motion of the body. The external force acting on a system of body from outside the system are called as applied forces.

4. Give any 3 advantages of free body diagram

?They assist in seeing and understanding all aspects of problem
?They help in planning the approach to the problem
?Theymake mathematical relations easier to the problem.

(ME6505 Dynamics of Machines Important questions)

5. When will the three force member is in equilibrium.

The resultant of forces is zero.
The line of action of the forces intersect at a point.

6. When will the two force member is in equilibrium.

?The two forces are of same magnitude.
? The forces acting along same line.
? The forces are in opposite direction.

(ME6505 Dynamics of Machines Important questions)

Subject Name DYNAMICS OF MACHINES
Subject code ME6505
Regulation 2013

ME6505 Dynamics of Machines Important questions Click here to download

ME6505 Dynamics of Machines Syllabus

ME6505 Dynamics of Machines Notes

ME6505 Dynamics of Machines Question Bank

Categories
r2013 notes

ME6505 DYNAMICS OF MACHINES notes Regulation 2013 Anna University

ME6505 DYNAMICS OF MACHINES notes Regulation 2013 Anna University

ME6505 Dynamics of Machines notes

ME6505 DYNAMICS OF MACHINES notes Regulation 2013 Anna University free download. ME6505 notes DYNAMICS OF MACHINES free pdf download.

OUTCOMES ME6505 DYNAMICS OF MACHINES notes:

Upon completion of this course, the Students can able to predict the force analysis in mechanical system and related vibration issues and can able to solve the problem.

TEXT BOOK ME6505 notes DYNAMICS OF MACHINES :

1. Uicker, J.J., Pennock G.R and Shigley, J.E., “Theory of Machines and Mechanisms” ,3rd Edition, Oxford University Press, 2009.

2. Rattan, S.S, “Theory of Machines”, 3rd Edition, Tata McGraw-Hill, 2009

REFERENCES ME6505 DYNAMICS OF MACHINES notes:

1. Thomas Bevan, “Theory of Machines”, 3rd Edition, CBS Publishers and Distributors, 2005.

2. Cleghorn. W. L, “Mechanisms of Machines”, Oxford University Press, 2005

3. Benson H. Tongue, ”Principles of Vibrations”, Oxford University Press, 2nd Edition, 2007 (ME6505 DYNAMICS OF MACHINES notes)

4. Robert L. Norton, “Kinematics and Dynamics of Machinery”, Tata McGraw-Hill, 2009.

5. Allen S. Hall Jr., “Kinematics and Linkage Design”, Prentice Hall, 1961

6. Ghosh. A and Mallick, A.K., “Theory of Mechanisms and Machines”, Affiliated East-West Pvt. Ltd., New Delhi, 1988.

7. Rao.J.S. and Dukkipati.R.V. “Mechanisms and Machine Theory”, Wiley-Eastern Ltd., New Delhi, 1992.

(ME6505 DYNAMICS OF MACHINES notes)

8. John Hannah and Stephens R.C., “Mechanics of Machines”, Viva Low-Prices Student Edition, 1999.

9. Grover. G.T., “Mechanical Vibrations”, Nem Chand and Bros., 1996 (ME6505 DYNAMICS OF MACHINES notes)

10. William T. Thomson, Marie Dillon Dahleh, Chandramouli Padmanabhan, “Theory of Vibration with Application”, 5th edition, Pearson Education, 2011

11. V.Ramamurthi, “Mechanics of Machines”, Narosa Publishing House, 2002.

12. Khurmi, R.S.,”Theory of Machines”, 14th Edition, S Chand Publications, 2005.

(ME6505 DYNAMICS OF MACHINES notes)

Problem 1. A single cylinder, single acting, four stroke gas engine develops 20 kW at 300 r.p.m. The work done by the gases during the expansion stroke is three times the work done on the gases during the compression stroke, the work done during the suction and exhaust strokes being negligible. If the total fluctuation of speed is not to exceed ± 2 per cent of the mean speed and the turning moment diagram during compression and expansion is assumed to be triangular in shape. Find the moment of inertia of the flywheel.

(ME6505 DYNAMICS OF MACHINES notes)

Subject Name DYNAMICS OF MACHINES
Subject code ME6505
Regulation 2013

ME6505 Dynamics of Machines Notes Click here to download

ME6505 Dynamics of Machines Syllabus

ME6505 Dynamics of Machines Important questions

ME6505 Dynamics of Machines Question Bank

Categories
UG syllabus R 2013

ME6505 DYNAMICS OF MACHINES Syllabus Regulation 2013 Anna University

ME6505 DYNAMICS OF MACHINES Syllabus Regulation 2013 Anna University

ME6505 Dynamics of Machines Syllabus

ME6505 DYNAMICS OF MACHINES Syllabus Regulation 2013 Anna University free download. ME6505 Syllabus DYNAMICS OF MACHINES free pdf download.

 OBJECTIVES ME6505 DYNAMICS OF MACHINES Syllabus:

To understand the force-motion relationship in components subjected to external forces and analysis of standard mechanisms.

To understand the undesirable effects of unbalances resulting from prescribed motions in mechanism.

To understand the effect of Dynamics of undesirable vibrations.

To understand the principles in mechanisms used for speed control and stability control.

UNIT I FORCE ANALYSIS ME6505 DYNAMICS OF MACHINES Syllabus

Dynamic force analysis – Inertia force and Inertia torque– D Alembert’s principle –Dynamic Analysis inreciprocating engines – Gas forces – Inertia effect of connecting rod– Bearing loads – Crank shaft torque – Turning moment diagrams –Fly Wheels – Flywheels of punching presses- Dynamics of Camfollower mechanism.

UNIT II BALANCING ME6505 DYNAMICS OF MACHINES Syllabus

Static and dynamic balancing – Balancing of rotating masses – Balancing a single cylinder engine – Balancing of Multi-cylinder inline, V-engines – Partial balancing in engines – Balancing of linkages – Balancing machines-Field balancing of discs and rotors.

UNIT III SINGLE DEGREE FREE VIBRATION ME6505 DYNAMICS OF MACHINES Syllabus

Basic features of vibratory systems – Degrees of freedom – single degree of freedom – Free vibration – Equations of motion – Natural frequency – Types of Damping – Damped vibration– Torsional vibration of shaft – Critical speeds of shafts – Torsional vibration – Two and three rotor torsional systems.

UNIT IV FORCED VIBRATION ME6505 DYNAMICS OF MACHINES Syllabus

Response of one degree freedom systems to periodic forcing – Harmonic disturbances –Disturbance caused by unbalance – Support motion –transmissibility – Vibration isolation vibration measurement.

UNIT V MECHANISM FOR CONTROL ME6505 Syllabus DYNAMICS OF MACHINES 

Governors – Types – Centrifugal governors – Gravity controlled and spring controlled centrifugal governors – Characteristics – Effect of friction – Controlling force curves. Gyroscopes –Gyroscopic forces and torques – Gyroscopic stabilization – Gyroscopic effects in Automobiles, ships and airplanes.

Subject Name DYNAMICS OF MACHINES
Subject code ME6505
Regulation 2013

ME6505 Dynamics of Machines Syllabus Click here to download

ME6505 Dynamics of Machines Notes

ME6505 Dynamics of Machines Important questions

ME6505 Dynamics of Machines Question Bank

Categories
question bank

ME6504 METROLOGY AND MEASUREMENTS Question Bank Regulation 2013 Anna University

ME6504-METROLOGY-AND-MEASUREMENTS-Question-Bank-Regulation-2013-Anna-University

ME6504 METROLOGY AND MEASUREMENTS Question Bank

ME6504 METROLOGY AND MEASUREMENTS Question Bank Regulation 2013 Anna University free download. ME6504 Question Bank METROLOGY AND MEASUREMENTS free pdf download.

Sample ME6504 METROLOGY AND MEASUREMENTS Question Bank:

PART –A (2MARKS)

1. Differentiate between sensitivity and range with suitable example.

2. Define system error and correction.

3. Define: Measurand. (ME6504 METROLOGY AND MEASUREMENTS Question Bank)

4. Define: Deterministic Metrology.

5. Define over damped and under damped system.

6. Give any four methods of measurement

7. Give classification of measuringinstruments.

8. Define Truesize

PART –B (16MARKS) (ME6504 METROLOGY AND MEASUREMENTS Question Bank)

1. Draw the block diagram of generalized measurement system and explaindifferentstages with examples.

2. Distinguish between Repeatability and reproducibility

3. Distinguish between Systematic and randomerrors

4. Distinguish between Static and dynamic response.

5. Describe the different types of errors in measurements and the causes.

6. List the various measurement methods and explain (ME6504 METROLOGY AND MEASUREMENTS Question Bank)

7. Briefly discuss on the applications of measuring instruments

8. Briefly discuss on calibration of temperature measuring devices with
suitableexamples

9. Explain the various systematic and random errors inmeasurements?

10. What is the need of calibration? Explain the classification of various
measuringmethods.

11. Describe loading errors and environmentalerrors.

12. What are elements of a measuring system? How they affect accuracy
andprecision? How error due to these elements areeliminated

Part-A (2 Marks) (ME6504 METROLOGY AND MEASUREMENTS Question Bank)

1. List the various linear measurements?

2. What are the various types of linear measuring instruments?

3. List out any four angular measuring instrument used in metrology

4. What iscomparator?

5. Classify the comparator according to the principles used for obtaining magnification.

6. How are all mechanical comparatoreffected? (ME6504 METROLOGY AND MEASUREMENTS Question Bank)

7. State the best example of a mechanicalcomparator.

8. Define least count and mention the least count of a mechanicalcomparator.

9. How the mechanical comparator is used? State with any oneexample.

10. State any four advantages of reed type mechanicalcomparator.

Part-B (16Marks) (ME6504 METROLOGY AND MEASUREMENTS Question Bank)

1. What is the constructional difference between an auto collimator and an angle dekkor.

2. Explain with the help of neat sketches, the principle and construction of an auto collimator

3. What types of measuring systems are used for linear distance?

4. Explain the working principle of mechanical comparator with a neat sketch.

5. Explain the working principle of Electrical comparator with a neat sketch

(ME6504 METROLOGY AND MEASUREMENTS Question Bank)

6. Explain the working principle of pneumatic comparator with a neat sketch

7. Explain with the help of neat sketches, the principle and construction of an Angledekkor.

8. Explain the precautionary measures one shall follow at various stages of usingslip gauges. Explain the process of ‘Wringing’ in slip gauges. Explain why sine bars arenot suitable for measuring angles above 45degrees.

9. Describe the method of checking the angle of a taper plug gauge usingrollers, micrometer and slipgauges,

10. State and explain the “Taylor’s principle of gaugedesign’.

(ME6504 METROLOGY AND MEASUREMENTS Question Bank)

Subject Name Metrology and Measurements
Subject code ME6504
Regulation 2013

ME6504 Metrology and Measurements Question Bank Click here to download

ME6504 Metrology and Measurements Syllabus

ME6504 Metrology and Measurements Notes

ME6504 Metrology and Measurements Important questions

 

Categories
Important question

ME6504 METROLOGY AND MEASUREMENTS Important questions Regulation 2013 Anna University

ME6504-METROLOGY-AND-MEASUREMENTS-Important-questions-Regulation-2013-Anna-University

ME6504 METROLOGY AND MEASUREMENTS Important questions

ME6504 METROLOGY AND MEASUREMENTS Important questions Regulation 2013 Anna University free download. ME6504 Important questions METROLOGY AND MEASUREMENTS free pdf download.

Sample ME6504 METROLOGY AND MEASUREMENTS Important questions:

PART-A (2 MARKS)

1. What are the uses of measurement?

2. What is legal metrology?

3. What are the objectives of metrology

4. What are the basic components of a measuring system?

5. Distinguish between Line standard and End standard.

6. Define the term Sensitivity of an instrument.

(ME6504 METROLOGY AND MEASUREMENTS Important questions)

7. Differentiate between precision and accuracy.

8. Define the term reliability.

9. Give any four methods of measurement.

10. Give classification of measuring instruments.

11. Define Span.

12. Distinguish between repeatability and reproducibility.

13. Define error. (ME6504 METROLOGY AND MEASUREMENTS Important questions)

14. Distinguish between static and random error?

15. What are the sources of error?

16. Write short note on “Systematic errors”.

17. What are the factors affecting the accuracy of the measuring system?

18. Write short notes on the classification of error

19. What is the role of N.P.L

20. Explain the different types of units (ME6504 METROLOGY AND MEASUREMENTS Important questions)

PART-B (16 MARKS)

1. Explain the need for measurement

2. Differentiate between precision and accuracy with suitable example.

3. State the requirements for an instrument to measure accurately.

4. What are the various possible sources of errors in measurements? What do you understand by systematic error and random errors? (ME6504 METROLOGY AND MEASUREMENTS Important questions)

5. Explain in detail various types of errors that may arise in engineering measurements and the ways to control it.

6. Explain the different types of standards.

7. Explain in detail the legal metrology

8. What the various standards that are being followed in India with respect to metrology

9. Explain the need of precision and accuracy in metrology

10. Explain the general measurement system with sketch (ME6504 METROLOGY AND MEASUREMENTS Important questions)

Subject Name Metrology and Measurements
Subject code ME6504
Regulation 2013

ME6504 Metrology and Measurements Important questions Click here to download

ME6504 Metrology and Measurements Syllabus

ME6504 Metrology and Measurements Notes

ME6504 Metrology and Measurements Question Bank